2500接入服務器配置
!
version 11.0
service config
no service udp-small-servers
no service tcp-small-servers
!
hostname router2509
!
boot system flash
enable secret 5 $1$Sna4$w1TBkzMxplA2DtxNAFnSy/
enable password lz
!
username wjz password 7 01040C1E
ip subnet-zero
chat-script cisco-default ABORT ERROR "" "AT Z" OK "ATDT \T" TIMEOUT 30 \c CONNECT \c
chat-script lx56 at&a3&b1&c1&d2&g0&h1&i1&k0=1
!
interface Ethernet0
ip address 202.99.223.201 255.255.255.248
no ip mroute-cache
!
interface Serial0
ip address 202.99.194.238 255.255.255.252
no ip mroute-cache
encapsulation ppp
bandwidth 64
no fair-queue
!
interface Serial1
no ip address
no ip mroute-cache
encapsulation ppp
shutdown
!
interface Async1
ip unnumbered Ethernet0
ip tcp header-compression passive
encapsulation ppp
async mode interactive
peer default ip address 202.99.223.206
no cdp enable
!
interface Async2
ip unnumbered Ethernet0
ip tcp header-compression passive
async mode interactive
peer default ip address 202.99.223.205
!
interface Async3
ip unnumbered Ethernet0
ip tcp header-compression passive
async mode interactive
peer default ip address 202.99.223.204
!
interface Async4
ip unnumbered Ethernet0
ip tcp header-compression passive
async mode interactive
peer default ip address 202.99.223.203
!
interface Async5
ip unnumbered Ethernet0
ip tcp header-compression passive
async mode interactive
peer default ip address 202.99.223.209
!
interface Async6
ip unnumbered Ethernet0
ip tcp header-compression passive
async mode interactive
peer default ip address 202.99.223.210
!
interface Async7
ip unnumbered Ethernet0
ip tcp header-compression passive
async mode interactive
peer default ip address 202.99.223.211
!
interface Async8
ip unnumbered Ethernet0
ip tcp header-compression passive
async mode interactive
!給接入的遠端分配IP地址
peer default ip address 202.99.223.212
!
ip name-server 202.99.192.68
ip name-server 202.99.198.6
ip name-server 202.96.0.133
ip classless
ip route 0.0.0.0 0.0.0.0 202.99.194.237
!
line con 0
exec-timeout 0 0
line 1
password wjz
script dialer cisco-default
script reset lx56
login local
modem InOut
autocommand ppp neg
transport input all
stopbits 1
rxspeed 19200
txspeed 19200
flowcontrol hardware
line 2 8
script dialer cisco-default
login local
modem InOut
autocommand ppp neg
transport input all
rxspeed 19200
txspeed 19200
flowcontrol hardware
line aux 0
transport input all
line vty 0 4
password lz
login
!
end
文章錄入：csh 責任編輯：csh相關文章
網絡安全防范體系及設計原則...2007-09-09
隧道策略...2007-09-09
電信禁止路由上網的破解方法...2007-09-09
解決文件夾選項隱藏文件打不開問題正文分析錯誤...2007-09-09
路由器配置新手上路---路由器的組成...2007-09-09
路由是把信息從源穿過網絡傳遞到目的的行為，本篇文章主要介紹了路由基礎概念解析，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2007-09-09
引起網絡廣播風暴的幾種原因
引起網絡廣播風暴的幾種原因...2007-09-09
組播的相關概念...2007-09-09
路由器訪問控制列表詳解...2007-09-09
備份和恢復Windows IIS服務器設置
備份和恢復Windows IIS服務器設置...2007-09-09