python 3.6 tkinter+urllib+json實現火車車次信息查詢功能

更新時間：2017年12月20日 11:27:51 作者：陳月白

這篇文章主要介紹了python 3.6 tkinter+urllib+json 火車車次信息查詢功能，本文以查詢火車車次至南京的信息為例,需要的朋友可以參考下

一、概述

妹子工作時需要大量地查詢火車車次至南京的信息，包括該車次到達站（南京站or南京南站）、到達時間、出發時間等，然后根據這些信息做下一步工作。

版本結束，趁著間歇期，幫她弄了個簡易的批量查詢工具，粉色的按鈕是給她用的~哈哈哈！ (๑*◡*๑)

大概80行代碼，主要是：

界面讀取待查詢車次 - - - - 調用車次信息接口- - - - 解析返回數據 - - - - 組裝結果 - - - - 封裝到界面（tkinter）

python+tkinter實現界面，詳見之前的學習筆記：http://www.fzitv.net/article/131059.htm

最終效果圖：

二、實現

1.界面讀取待查詢車次

之前總結過使用tkinter實現GUI，詳見之前的筆記：http://www.fzitv.net/article/131059.htm

2.調用車次信息接口

題外話，之前是做的從界面讀取待查詢車次信息，然后構造成攜程的查詢url，取到數據后篩選信息；

但后續在取到頁面數據后，decode時發現總拋解碼異常，百度之，原因是頁面源碼中編碼格式有多樣，decode時需要加個錯誤跳過參數。。

但車次信息恰巧在跳過之列。。。

但是已經跟妹子說很快就能搞好（裝b），于是就直接申請了某第三方平臺的接口 QAQ

網上查了下，免費的接口基本都不提供服務了。于是用的某第三方平臺的接口（某速數據），注冊贈1000條，續費5元1W條（暫時沒續=。=）

 #調用車次信息接口，獲取車次信息
 def getTrainScheduleInfo(self,trainSchedule):
  trainBaseInfo = ""
  #拼接URL
  url = "http://api.xxxx.com/train/line?appkey=xxxxxx&trainno=" + trainSchedule
  #print(url)
  #獲取數據
  try:
   trainBaseInfo = self.send_GET_request(url)　　#發送GET請求，python3.X是用urllib.request庫，網上很多
  except:
   print("ERROR:FUNC getTrainScheduleInfo select_items_from_url failed.url = %s ,flag = %s"%(trainSchedule))
  return trainBaseInfo

3.解析返回數據

返回數據為json類型的字符串，直接json.loads后，解析即可

#獲取所有待查詢車次信息
  allTrainResultDic = {}  #車次查詢結果集合
  for trainSchedule in trainScheduleList:
   trainBaseInfo = self.getTrainScheduleInfo(trainSchedule)  #json string
   # #----測試----
   # trainBaseInfo = '''{"status":"0","msg":"ok","result":{"trainno":"G8","type":"高鐵","list":[{"sequenceno":"1","station":"上海虹橋","day":"1","arrivaltime":"----","departuretime":"19:00","stoptime":"0","costtime":"0","distance":"0","isend":"0","pricesw":"","pricetd":"","pricegr1":"","pricegr2":"","pricerw1":"0","pricerw2":"0","priceyw1":"0","priceyw2":"0","priceyw3":"0","priceyd":"0.0","priceed":"0.0"},{"sequenceno":"2","station":"南京南","day":"1","arrivaltime":"20:00","departuretime":"20:02","stoptime":"2","costtime":"60","distance":"295","isend":"0","pricesw":"429.5","pricetd":"0","pricegr1":"0","pricegr2":"0","pricerw1":"0","pricerw2":"0","priceyw1":"0","priceyw2":"0","priceyw3":"0","priceyd":"229.5","priceed":"134.5"},{"sequenceno":"3","station":"濟南西","day":"1","arrivaltime":"21:59","departuretime":"22:01","stoptime":"2","costtime":"179","distance":"0","isend":"0","pricesw":"1263.5","pricetd":"","pricegr1":"","pricegr2":"","pricerw1":"0","pricerw2":"0","priceyw1":"0","priceyw2":"0","priceyw3":"0","priceyd":"673.5","priceed":"398.5"},{"sequenceno":"4","station":"天津南","day":"1","arrivaltime":"22:59","departuretime":"23:01","stoptime":"2","costtime":"239","distance":"0","isend":"0","pricesw":"1603.5","pricetd":"","pricegr1":"","pricegr2":"","pricerw1":"0","pricerw2":"0","priceyw1":"0","priceyw2":"0","priceyw3":"0","priceyd":"853.5","priceed":"508.5"},{"sequenceno":"5","station":"北京南","day":"1","arrivaltime":"23:34","departuretime":"23:34","stoptime":"0","costtime":"274","distance":"0","isend":"1","pricesw":"1748","pricetd":"","pricegr1":"","pricegr2":"","pricerw1":"0","pricerw2":"0","priceyw1":"0","priceyw2":"0","priceyw3":"0","priceyd":"933.0","priceed":"553.0","costtimetxt":"4時34分"}]}}'''
   # #----測試----
   print("trainBaseInfo =",trainBaseInfo)
   #解析
   if trainBaseInfo:
    try:
     trainBaseInfo_loads = json.loads(trainBaseInfo)
     if trainBaseInfo_loads["status"] == "0":
      resultNodeValue = trainBaseInfo_loads["result"]
      trainnoNodeValue = resultNodeValue["trainno"]  #查詢車次代碼
      typeNodeValue = resultNodeValue["type"]   #車次類型
      listNodeValue = resultNodeValue["list"]   #途徑站點信息集合 list
      #篩選出途經南京、南京南
      for trainInfo in listNodeValue:
       if (cityName1 in trainInfo.values()) or (cityName2 in trainInfo.values()):
        #解析數據
        arrivedStation = trainInfo["station"]   #到達站
        arrivedTime = trainInfo["arrivaltime"]  #到站時間
        leaveTime = trainInfo["departuretime"]  #離站時間
        if arrivedStation == "南京":
         arrivedStation = "南京站"  
        # 存儲該車次查詢結果
        trainResult = []
        trainResult.append(arrivedStation)
        trainResult.append(arrivedTime)
        trainResult.append(leaveTime)
        trainResult.append(typeNodeValue)
        allTrainResultDic[trainSchedule] = trainResult
       else:
        #self.write_log_to_Text("ERROR:車次: %s 無途徑南京站信息，跳過" % trainSchedule)
        continue
     else:
      self.write_log_to_Text("ERROR:車次: %s 檢查返回數據狀態碼不為0，跳過" % trainSchedule)
      continue
    except:
     self.write_log_to_Text("ERROR:車次：%s 返回的json串失敗 "% trainSchedule)
   else:
    self.write_log_to_Text("ERROR:車次: %s 查詢接口返回信息為空，已跳過"%trainSchedule)
    continue
  print(allTrainResultDic)

4.組裝結果、界面輸出

 #組裝結果界面輸出
  self.result_data_Text.delete(1.0, END)
  head = "車次 南京到達站 到站時間 離站時間  類型"
  self.result_data_Text.insert(1.0, head)
  for train in allTrainResultDic.keys():
   outMsg = "\n" + "-" * 52 + "\n" + "%4s"%train + "%9s"%allTrainResultDic[train][0] + "%13s"%allTrainResultDic[train][1] + "%12s"%allTrainResultDic[train][2] + "%8s"%allTrainResultDic[train][3]
   self.result_data_Text.insert(END,outMsg)
  self.write_log_to_Text("INFO：獲取火車至南京信息完成")

總結

以上所述是小編給大家介紹的python 3.6 tkinter+urllib+json實現火車車次信息查詢功能，希望對大家有所幫助，如果大家有任何疑問請給我留言，小編會及時回復大家的。在此也非常感謝大家對腳本之家網站的支持！

您可能感興趣的文章: