php無限級評論嵌套實現代碼
我在設計BB的過程中,也一直在思考是否可以不通過遞歸來實現無限級分類的結構展現和父子結構查找,因為如果不對這里的算法進行優化后果可能是致命的!試想一下,一篇文章如果評論數為300,按正常的遞歸算法,至少就得查詢數據庫301次,而且還是在沒有任何嵌套的情況下,如果有過一兩級嵌套或者評論數過1000,那數據庫不是直接宕掉?
而實際上,PHP強大的數組處理能力已經能幫助我們快速方便的解決這個問題。下圖為一個無限級分類的
數據庫結構:
IDparentID newsID commts
108文章ID為8的評論
21 8對ID為1的評論的回復
328對ID為2的評論的回復
要在前臺嵌套式的展現文章編號8的評論,其實我們只用查詢一次數據庫,即“SELECT * FROM TABLE WHERE newsID=8”,而把后期的遞歸工作交給強大的PHP數組來完成。這里可能涉及的問題就是數組的結構關系的重組,即將所有停留在一級分類上的評論全部放到自己的parentID下,形成children項。
下面將BBComment類中這塊的代碼粘貼出來,希望與大家分享下我的思路,也希望大家能夠提出更好更有效率的算法。
方法一
/**
* 按ID條件從評論數組中遞歸查找
*
*/
function getCommentsFromAryById($commtAry, $id)
{
if ( !is_array($commtAry) ) return FALSE;
foreach($commtAry as $key=>$value) {
if ( $value['id'] == $id ) return $value;
if ( isset($value['children']) && is_array($children) ) $this->getCommentsFormAryById($value['children'], $id);
}
}
/**
* 追加 子評論 到 主評論 中,并形成children子項
*
* @param array $commtAry 原評論數據引用
* @param int $parentId 主評論ID
* @param array $childrenAry 子評論的值
*/
function addChildenToCommentsAry($commtAry, $parentId, $childrenAry)
{
if ( !is_array($commtAry) ) return FALSE;
foreach($commtAry as $key=>$value) {
if ( $value['id'] == $parentId ) {
$commtAry[$key]['children'][] = $childrenAry;
return TRUE;
}
if ( isset($value['children']) ) $this->addChildenToCommentsAry($commtAry[$key]['children'], $parentId, $childrenAry);
}
}
$result = $this->BBDM->select($table, $column, $condition, 0, 1000);
/* 開始進行嵌套評論結構重組 */
array_shift($result);
$count = count($result);
$i = 0;
while( $i<$count ) {
if ( '0' != $result[$i]['parentId'] ) {
$this->addChildenToCommentsAry($result, $result[$i]['parentId'], $result[$i]);
unset($result[$i]);
}
$i++;
}
$result = array_values($result);
/* 重組結束 */
實現方法二
核心代碼摘自WordPress
<?php
$comments = array (
array (
'id' => '3',
'parent' => '0'
),
array (
'id' => '9',
'parent' => '0'
),
array (
'id' => '1',
'parent' => '3'
),
array (
'id' => '2',
'parent' => '3'
),
array (
'id' => '5',
'parent' => '1'
),
array (
'id' => '7',
'parent' => '1'
)
);
function html5_comment($comment) {
echo '<li>';
echo 'id:', $comment['id'], ' parent:', $comment['parent'];
}
function start_el(& $output, $comment) {
ob_start();
html5_comment($comment);
$output .= ob_get_clean();
}
function end_el(& $output) {
$output .= "</li><!-- #comment-## -->\n";
}
function start_lvl(& $output) {
$output .= '<ol class="children">' . "\n";
}
function end_lvl(& $output) {
$output .= "</ol><!-- .children -->\n";
}
function display_element($e, & $children_elements, $max_depth, $depth, & $output) {
$id = $e['id'];
start_el($output, $e); //當前評論的開始代碼
if ($max_depth > $depth +1 && isset ($children_elements[$id])) { //如果沒超過最大層,并且存在子元素數組
foreach ($children_elements[$id] as $child) {
if (!isset ($newlevel)) { //第一次循環沒設置變量$newlevel,所以把$newlevel設為true,并且開始子元素的開始代碼;第二次及之后的循環,已經設置了$newlevel,就不會再添加子元素的開始代碼。因為同一批循環時兄弟元素,所以只需要一個子元素開始代碼,循環內容為并列關系。
$newlevel = true;
start_lvl($output);
}
display_element_template($child, $children_elements, $max_depth, $depth +1, $output); //$child作為參數,繼續去尋找下級元素
}
unset ($children_elements[$id]); //用完釋放變量,以后就不會重復判斷該值了,遞歸后繼續判斷剩下的子元素
}
if (isset ($newlevel) && $newlevel) { //如果前面找到了子元素,這里就要執行子元素的結束代碼
end_lvl($output);
}
end_el($output); //當前評論的結束代碼
}
function display_element_template($e, & $children_elements, $max_depth, $depth, & $output) {
$id = $e['id'];
display_element($e, $children_elements, $max_depth, $depth, $output);
if ($max_depth <= $depth +1 && isset ($children_elements[$id])) { //如果超出最大層級,并且子元素存在的話,以$child為參數繼續往下找
foreach ($children_elements[$id] as $child) {
display_element_template($child, $children_elements, $max_depth, $depth, $output);
}
unset ($children_elements[$id]); //用完釋放變量
}
}
function comments_list($comments) {
$top_level_elements = array ();
$children_elements = array ();
foreach ($comments as $e) {
if (0 == $e['parent']) {
$top_level_elements[] = $e;
} else {
$children_elements[$e['parent']][] = $e;
}
}
$output = '';
foreach ($top_level_elements as $e) {
display_element_template($e, $children_elements, 2, 0, $output);
}
//var_dump($children_elements);//由于每次用完$children_elements后都會釋放變量,所以到最后$children_elements為空數組
return $output;
}
echo '<ol class="comment-list">', comments_list($comments), '</ol>';
這篇文章就介紹到這了,其實大家多參考一些開源的cms也可以看到很多不錯的代碼,希望大家以后多多支持腳本之家
相關文章
php 實現svg轉化png格式的方法分析
這篇文章主要介紹了php 實現svg轉化png格式的方法,結合實例形式分析了php svg轉化png格式相關實現技巧、遇到的問題與操作注意事項,需要的朋友可以參考下2020-01-01
使用GROUP BY的時候如何統計記錄條數 COUNT(*) DISTINCT
在有g(shù)roup by的時候,如何統計結果記錄的數量?需要的朋友可以參考下。2011-04-04
一款簡單實用的php操作mysql數據庫類
這篇文章主要介紹了一款簡單實用的php操作mysql數據庫類,不但包含了php針對mysql數據庫的常見操作之外,還有針對危險字符的過濾功能,非常具有實用價值,需要的朋友可以參考下2014-12-12
PHP GD庫相關圖像生成和處理函數小結
這篇文章主要介紹了PHP GD庫相關圖像生成和處理函數,分類總結并分析了php GD庫相關圖像處理函數的功能與用法,需要的朋友可以參考下2016-09-09
在php中實現限流ip次數以及允許部分ip訪問的代碼示例
這篇文章給大家介紹了如何在php中實現限流ip次數以及允許部分ip訪問,文中通過代碼示例給大家介紹的非常詳細,對大家的學習具有一定的參考價值,需要的朋友可以參考下2023-12-12
PHP7.1方括號數組符號多值復制及指定鍵值賦值用法分析
這篇文章主要介紹了PHP7.1方括號數組符號多值復制及指定鍵值賦值用法,結合實例形式對比分析了php7數組復制與賦值的新特性與操作技巧,需要的朋友可以參考下2016-09-09

