快捷導航

Android檢測IBeacon熱點的方法

更新時間：2018年10月31日 08:57:51 作者：周孫靜

這篇文章主要介紹了Android檢測IBeacon熱點的方法，具有一定的參考價值，感興趣的小伙伴們可以參考一下

IBeacon是BLE的一種，搜索iBeacon基站關鍵在于設備掃描到的scanRecord數組，識別是否有下面加粗斜體的02 15這兩個數字。如果有，搜索到的藍牙設備就是IBeacon。
// AirLocate:
// 02 01 1a 1a ff 4c 00 02 15 # Apple's fixed iBeacon advertising prefix
// e2 c5 6d b5 df fb 48 d2 b0 60 d0 f5 a7 10 96 e0 # iBeacon profile uuid
// 00 00 # major
// 00 00 # minor
// c5 # The 2's complement of the calibrated Tx Power

下面分步驟來實現檢測IBeacon熱點。

一、獲得手機藍牙控制權限

在manifest 文件中寫上：

<uses-permission android:name="android.permission.BLUETOOTH"/>
<uses-permission android:name="android.permission.BLUETOOTH_ADMIN"/>

二、檢測手機是否支持藍牙，并獲取mBluetoothAdapter 對象

if (!getPackageManager().hasSystemFeature(
        PackageManager.FEATURE_BLUETOOTH_LE))
    {
      Toast.makeText(this, R.string.ble_not_supported, Toast.LENGTH_SHORT)
          .show();
      finish();
    }
    final BluetoothManager bluetoothManager = (BluetoothManager) getSystemService(Context.BLUETOOTH_SERVICE);
    mBluetoothAdapter = bluetoothManager.getAdapter();

    if (mBluetoothAdapter == null)
    {
      Toast.makeText(this, R.string.error_bluetooth_not_supported,
          Toast.LENGTH_SHORT).show();
      finish();
      return;
    }

三、實現LeScanCallback回調接口

設備每次檢測到一個藍牙設備，就會回調這個接口中的onLeScan()方法，并且傳入掃描到的device，rssi，scanRecord等參數。

private BluetoothAdapter.LeScanCallback mLeScanCallback = new BluetoothAdapter.LeScanCallback()
  {
    @Override
    public void onLeScan(final BluetoothDevice device, int rssi,
        byte[] scanRecord)
    {
      //在這里處理掃描到的參數
      //判斷是不是IBeacon設備，做相應的處理。
    }
  };

四、處理掃描到的參數的方法

public class iBeaconClass
{

  static public class iBeacon
  {
    public String name;
    public int major;
    public int minor;
    public String proximityUuid;
    public String bluetoothAddress;
    public int txPower;
    public int rssi;
  }


  /**
   * 將掃描到的信息傳入這個方法
   * 該方法會判斷掃描到的設備是不是IBeacon
   * 如果是就返回一個IBeacon對象
   * 如果不是就返回null
   * @param device
   * @param rssi
   * @param scanData
   * @return
   */
  public static iBeacon fromScanData(BluetoothDevice device, int rssi,
      byte[] scanData)
  {

    int startByte = 2;
    boolean patternFound = false;
    while (startByte <= 5)
    {
      if (((int) scanData[startByte + 2] & 0xff) == 0x02
          && ((int) scanData[startByte + 3] & 0xff) == 0x15)
      {
        // yes! This is an iBeacon
        patternFound = true;
        break;
      } else if (((int) scanData[startByte] & 0xff) == 0x2d
          && ((int) scanData[startByte + 1] & 0xff) == 0x24
          && ((int) scanData[startByte + 2] & 0xff) == 0xbf
          && ((int) scanData[startByte + 3] & 0xff) == 0x16)
      {
        iBeacon iBeacon = new iBeacon();
        iBeacon.major = 0;
        iBeacon.minor = 0;
        iBeacon.proximityUuid = "00000000-0000-0000-0000-000000000000";
        iBeacon.txPower = -55;
        return iBeacon;
      } else if (((int) scanData[startByte] & 0xff) == 0xad
          && ((int) scanData[startByte + 1] & 0xff) == 0x77
          && ((int) scanData[startByte + 2] & 0xff) == 0x00
          && ((int) scanData[startByte + 3] & 0xff) == 0xc6)
      {

        iBeacon iBeacon = new iBeacon();
        iBeacon.major = 0;
        iBeacon.minor = 0;
        iBeacon.proximityUuid = "00000000-0000-0000-0000-000000000000";
        iBeacon.txPower = -55;
        return iBeacon;
      }
      startByte++;
    }

    if (patternFound == false)
    {
      // This is not an iBeacon
      return null;
    }

    iBeacon iBeacon = new iBeacon();

    iBeacon.major = (scanData[startByte + 20] & 0xff) * 0x100
        + (scanData[startByte + 21] & 0xff);
    iBeacon.minor = (scanData[startByte + 22] & 0xff) * 0x100
        + (scanData[startByte + 23] & 0xff);
    iBeacon.txPower = (int) scanData[startByte + 24]; // this one is signed
    iBeacon.rssi = rssi;

    // AirLocate:
    // 02 01 1a 1a ff 4c 00 02 15 # Apple's fixed iBeacon advertising prefix
    // e2 c5 6d b5 df fb 48 d2 b0 60 d0 f5 a7 10 96 e0 # iBeacon profile
    // uuid
    // 00 00 # major
    // 00 00 # minor
    // c5 # The 2's complement of the calibrated Tx Power

    // Estimote:
    // 02 01 1a 11 07 2d 24 bf 16
    // 394b31ba3f486415ab376e5c0f09457374696d6f7465426561636f6e00000000000000000000000000000000000000000000000000

    byte[] proximityUuidBytes = new byte[16];
    System.arraycopy(scanData, startByte + 4, proximityUuidBytes, 0, 16);
    String hexString = bytesToHexString(proximityUuidBytes);
    StringBuilder sb = new StringBuilder();
    sb.append(hexString.substring(0, 8));
    sb.append("-");
    sb.append(hexString.substring(8, 12));
    sb.append("-");
    sb.append(hexString.substring(12, 16));
    sb.append("-");
    sb.append(hexString.substring(16, 20));
    sb.append("-");
    sb.append(hexString.substring(20, 32));
    iBeacon.proximityUuid = sb.toString();

    if (device != null)
    {
      iBeacon.bluetoothAddress = device.getAddress();
      iBeacon.name = device.getName();
    }

    return iBeacon;
  }

  private static String bytesToHexString(byte[] src)
  {
    StringBuilder stringBuilder = new StringBuilder("");
    if (src == null || src.length <= 0)
    {
      return null;
    }
    for (int i = 0; i < src.length; i++)
    {
      int v = src[i] & 0xFF;
      String hv = Integer.toHexString(v);
      if (hv.length() < 2)
      {
        stringBuilder.append(0);
      }
      stringBuilder.append(hv);
    }
    return stringBuilder.toString();
  }
}

五、開啟藍牙

mBluetoothAdapter.enable();

六、開始掃描

mBluetoothAdapter.startLeScan(mLeScanCallback);

代碼改自鏈接地址

以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。

您可能感興趣的文章: