C# WPF上位機實現和下位機TCP通訊的方法
更新時間：2019年03月20日 14:37:43 作者：Samberger
這篇文章主要介紹了C# WPF上位機實現和下位機TCP通訊的方法，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧
下位機使用北京大華程控電源DH1766-1，上位機使用WPF。實現了電壓電流實時采集，曲線顯示。上午在公司調試成功，手頭沒有程控電源，使用TCP服務端模擬。昨天寫的TCP服務端正好排上用場。
界面如下：
服務端
服務端實在上篇基礎上實現的。需要做如下更改：
while (true)
{
try
{
byte[] bufferDate = new byte[1024];
int realLen = pSocket.Receive(bufferDate);
if (realLen <= 0)
{
this.Invoke(addTextDelegate, pSocket.RemoteEndPoint.ToString() + "退出\r\n");
socketList.Remove(pSocket);
//客戶端退出的時候會發送一個空字節
pSocket.Shutdown(SocketShutdown.Both);
pSocket.Close();
return;
}
string receiveStr = Encoding.Default.GetString(bufferDate, 0, realLen);
switch (receiveStr)
{
case "MEAS:VOLTage:ALL?\n":
proxSocket.Send(Encoding.Default.GetBytes(r.Next(16,25).ToString()+ ","+r.Next(16, 25).ToString()+","+ r.Next(16, 25).ToString()));
break;
case "MEAS:CURR:ALL?\n":
proxSocket.Send(Encoding.Default.GetBytes(r.Next(2, 5).ToString() + "," + r.Next(2, 5).ToString() + "," + r.Next(2, 5).ToString()));
break;
default:
break;
}
this.Invoke(addTextDelegate, receiveStr + "from" + pSocket.RemoteEndPoint.ToString() + "\r\n");
}
catch (Exception ex)
{
this.Invoke(addTextDelegate, pSocket.RemoteEndPoint.ToString() + "異常退出\r\n");
socketList.Remove(pSocket);
pSocket.Shutdown(SocketShutdown.Both);
pSocket.Close();
return;
}
}
在While循環中加入：
switch (receiveStr)
{
case "MEAS:VOLTage:ALL?\n":
proxSocket.Send(Encoding.Default.GetBytes(r.Next(16,25).ToString()+ ","+r.Next(16, 25).ToString()+","+ r.Next(16, 25).ToString()));
break;
case "MEAS:CURR:ALL?\n":
proxSocket.Send(Encoding.Default.GetBytes(r.Next(2, 5).ToString() + "," + r.Next(2, 5).ToString() + "," + r.Next(2, 5).ToString()));
break;
default:
break;
}
模擬電源，當收到電壓查詢時，發送16~25中隨機數，由于電源是三個通道的，因此發送三個隨機數，用逗號隔開。同樣收到電流查詢，發送2~5之間的隨機數。
完整的客戶端源碼：
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
addTextDelegate = new AddTextDelegate(AddText);
}
private AddTextDelegate addTextDelegate;
private List<Socket> socketList = new List<Socket>();
public delegate void AddTextDelegate(string text);
private void AddText(string text)
{
txtLog.Text += text;
}
Random r = new Random();
private void btnStart_Click(object sender, EventArgs e)
{
//參數：尋址方式 傳輸數據方式 通信協議
Socket socket = new Socket(AddressFamily.InterNetwork,SocketType.Stream,ProtocolType.Tcp);
IPAddress iPAddress = IPAddress.Parse(txtIP.Text);
//創建EndPoint
IPEndPoint iPEndPoint = new IPEndPoint(iPAddress, int.Parse(txtPort.Text));
//綁定端口
socket.Bind(iPEndPoint);
//開啟偵聽
socket.Listen(10);
txtLog.Text += "服務啟動開啟偵聽……\r\n";
Thread thread = new Thread((s) =>
{
Socket serSocket = (Socket)s;
while (true)//不斷接收客戶端連接
{
this.Invoke(addTextDelegate, "服務正在等待客戶端連接……\r\n");
//開始接收客戶端的連接
//阻塞當前線程，等待客戶端連接
//客戶端連接上之后，服務端自動生成一個socket和連接的客端通信
Socket proxSocket = serSocket.Accept();
this.Invoke(addTextDelegate, "客戶端連接成功！\r\n" + proxSocket.RemoteEndPoint.ToString());
//proxSocket.Send(Encoding.Default.GetBytes("連接成功！"));
socketList.Add(proxSocket);//當前通信的socket放到集合中
new Thread(p =>
{
Socket pSocket = (Socket)p;
while (true)
{
try
{
byte[] bufferDate = new byte[1024];
int realLen = pSocket.Receive(bufferDate);
if (realLen <= 0)
{
this.Invoke(addTextDelegate, pSocket.RemoteEndPoint.ToString() + "退出\r\n");
socketList.Remove(pSocket);
//客戶端退出的時候會發送一個空字節
pSocket.Shutdown(SocketShutdown.Both);
pSocket.Close();
return;
}
string receiveStr = Encoding.Default.GetString(bufferDate, 0, realLen);
switch (receiveStr)
{
case "MEAS:VOLTage:ALL?\n":
proxSocket.Send(Encoding.Default.GetBytes(r.Next(16,25).ToString()+ ","+r.Next(16, 25).ToString()+","+ r.Next(16, 25).ToString()));
break;
case "MEAS:CURR:ALL?\n":
proxSocket.Send(Encoding.Default.GetBytes(r.Next(2, 5).ToString() + "," + r.Next(2, 5).ToString() + "," + r.Next(2, 5).ToString()));
break;
default:
break;
}
this.Invoke(addTextDelegate, receiveStr + "from" + pSocket.RemoteEndPoint.ToString() + "\r\n");
}
catch (Exception ex)
{
this.Invoke(addTextDelegate, pSocket.RemoteEndPoint.ToString() + "異常退出\r\n");
socketList.Remove(pSocket);
pSocket.Shutdown(SocketShutdown.Both);
pSocket.Close();
return;
}
}
})
{ IsBackground = true }.Start(proxSocket);
}
});
thread.IsBackground = true;
thread.Start(socket);
}
private void btnSend_Click(object sender, EventArgs e)
{
string str = txtSend.Text;
byte[] data = Encoding.Default.GetBytes(str);
foreach (var socket in socketList)
{
if (socket != null && socket.Connected)
{
socket.Send(data);
}
}
}
}
上位機實現客戶端功能。具體如下：
1、字段和屬性
public readonly IPEndPoint TagetIPEP;
public bool IsConnected { get; set; } = false;
private Socket socket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp) { /*ReceiveTimeout=1000,SendTimeout=1000*/};
private Thread recListenThread;
public string ReceiveStr { get; set; }
public byte[] ReceiveByte { get; set; }
TagetIPEP是服務器地址和端口。
IsConnected是連接的狀態，這個比較重要，在發送和接收時，都要更加IsConnected進行，并更新IsConnected。
Socket用于和客戶端通訊。
recListenThread是監聽客戶端消息的線程。
ReceiveStr和ReceiveByte用來存儲客戶端發來的消息。
2、方法函數連接方法：
public bool Connect()
{
try
{
socket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp)
{
//ReceiveTimeout = 1000,
//SendTimeout=1000
};
//IAsyncResult connResult = socket.BeginConnect(TagetIPEP.Address, TagetIPEP.Port, null, null);
//connResult.AsyncWaitHandle.WaitOne(5000, true);
//if (connResult.IsCompleted)
//{
socket.Connect(TagetIPEP.Address, TagetIPEP.Port);
IsConnected = true;
//開啟接收監聽
recListenThread = new Thread(() =>
{
while (true)
{
try
{
ReceiveByte = new byte[1024];
int realLen = socket.Receive(ReceiveByte);
ReceiveStr = Encoding.Default.GetString(ReceiveByte, 0, realLen);
ReceiveEvent();
if (realLen <= 0)
{
if (socket != null && socket.Connected)
{
//服務器退出
IsConnected = false;
Log.WriteLog("服務器退出！");
socket.Shutdown(SocketShutdown.Both);
socket.Close();
MessageBox.Show("連接斷開！");
}
return;
}
}
catch (Exception ex)
{
if (socket != null && socket.Connected)
{
IsConnected = false;
Log.WriteLog("服務器異常退出！", ex);
socket.Shutdown(SocketShutdown.Both);
socket.Close();
}
return;
}
}
})
{ IsBackground = true };
recListenThread.Start();
return true;
//}
}
catch (Exception ex)
{
Log.WriteLog(TagetIPEP.Address + "連接失敗", ex);
}
return false;
}
連接函數返回值為bool類型，根據返回值判斷連接是否成功連接。這里每次連接都實例化了一個socket，因?yàn)樵趫?zhí)行socket.close()后，重新打開會失敗，而斷線重連會經常用到，沒有找到更好的方法，干脆重新實例化socket。連接成功后，開啟監聽服務端消息的線程。這里使用了一個ReceiveEvent()事件，在接收到消息時會觸發這個事件，刷新UI界面。
發送方法：
public bool Send(string msg)
{
byte[] sendMsg = Encoding.Default.GetBytes(msg);
if (sendMsg.Length > 0&&IsConnected)
{
if (socket != null && socket.Connected)
{
try
{
socket.Send(sendMsg);
return true;
}
catch (Exception ex)
{
IsConnected = false;
Log.WriteLog("發送數據失敗,目標地址" + TagetIPEP.Address, ex);
}
}
}
return false;
}
關閉方法：
public void Close()
{
if (socket != null && socket.Connected)
{
IsConnected = false;
recListenThread.Abort();
Log.WriteLog("關閉連接！");
socket.Shutdown(SocketShutdown.Both);
socket.Close();
}
}
在出現異常時調用
消息接收事件：
public event Action ReceiveEvent;
每次接收消息時觸發，獲取屬性ReceiveStr和ReceiveByte的值，刷新UI界面。
完整代碼：
public class TCPClient
{
public TCPClient(/*IPEndPoint localIPEP,*/IPEndPoint targetIPEP)
{
//socket.Bind(localIPEP);
TagetIPEP = targetIPEP;
}
public readonly IPEndPoint TagetIPEP;
public bool IsConnected { get; set; } = false;
private Socket socket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp) { /*ReceiveTimeout=1000,SendTimeout=1000*/};
public bool Connect()
{
try
{
socket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp)
{
//ReceiveTimeout = 1000,
//SendTimeout=1000
};
//IAsyncResult connResult = socket.BeginConnect(TagetIPEP.Address, TagetIPEP.Port, null, null);
//connResult.AsyncWaitHandle.WaitOne(5000, true);
//if (connResult.IsCompleted)
//{
socket.Connect(TagetIPEP.Address, TagetIPEP.Port);
IsConnected = true;
//開啟接收監聽
recListenThread = new Thread(() =>
{
while (true)
{
try
{
ReceiveByte = new byte[1024];
int realLen = socket.Receive(ReceiveByte);
ReceiveStr = Encoding.Default.GetString(ReceiveByte, 0, realLen);
ReceiveEvent();
if (realLen <= 0)
{
if (socket != null && socket.Connected)
{
//服務器退出
IsConnected = false;
Log.WriteLog("服務器退出！");
socket.Shutdown(SocketShutdown.Both);
socket.Close();
MessageBox.Show("連接斷開！");
}
return;
}
}
catch (Exception ex)
{
if (socket != null && socket.Connected)
{
IsConnected = false;
Log.WriteLog("服務器異常退出！", ex);
socket.Shutdown(SocketShutdown.Both);
socket.Close();
}
return;
}
}
})
{ IsBackground = true };
recListenThread.Start();
return true;
//}
}
catch (Exception ex)
{
Log.WriteLog(TagetIPEP.Address + "連接失敗", ex);
}
return false;
}
public bool Send(string msg)
{
byte[] sendMsg = Encoding.Default.GetBytes(msg);
if (sendMsg.Length > 0&&IsConnected)
{
if (socket != null && socket.Connected)
{
try
{
socket.Send(sendMsg);
return true;
}
catch (Exception ex)
{
IsConnected = false;
Log.WriteLog("發送數據失敗,目標地址" + TagetIPEP.Address, ex);
}
}
}
return false;
}
public event Action ReceiveEvent;
public string ReceiveStr { get; set; }
public byte[] ReceiveByte { get; set; }
public void Close()
{
if (socket != null && socket.Connected)
{
IsConnected = false;
recListenThread.Abort();
Log.WriteLog("關閉連接！");
socket.Shutdown(SocketShutdown.Both);
socket.Close();
}
}
private Thread recListenThread;
}
前臺調用，聲明Timer定時器，每個一秒觸發一次。觸發事件如下：
private string flag = "";
private void QueryTimer_Elapsed(object sender, System.Timers.ElapsedEventArgs e)
{
Now = DateTime.Now;
if (!tcp.Send("MEAS:VOLTage:ALL?\n"))
{
queryTimer.Enabled = false;
StartContent = "開始";
ConnContent = "連接";
tcp.IsConnected = false;
MessageBox.Show("查詢失?。?);
return;
}
flag = "V";
Thread.Sleep(50);
if (!tcp.Send("MEAS:CURR:ALL?\n"))
{
queryTimer.Enabled = false;
StartContent = "開始";
ConnContent = "連接";
tcp.IsConnected = false;
MessageBox.Show("查詢失??！");
return;
}
flag = "C";
#region 測試
//angle += 18;
//if (angle > 360)
//{
// angle = 18;
//}
#endregion
}
刷新UI界面的事件如下：
private void Tcp_ReceiveEvent()
{
Task.Run(() =>
{
Application.Current.Dispatcher.Invoke(() =>
{
RemoteIP = tcp.TagetIPEP.ToString();
switch (flag)
{
case "V":
VoltValue = Math.Round(Convert.ToDouble(tcp.ReceiveStr.Split(',')[0]), 3);
break;
case "C":
CurrentValue = Math.Round(Convert.ToDouble(tcp.ReceiveStr.Split(',')[0]), 3);
break;
default:
break;
}
#region 測試
//VoltValue = Math.Round(Math.Sin((angle) * pi / 180) * 16 + 16, 3);
//CurrentValue = Math.Round(Math.Sin((angle) * pi / 180) * 2.5 + 2.5, 3);
#endregion
VoltValues.Add(VoltValue);
CurrentValues.Add(CurrentValue);
if (VoltValues.Count > 30)
{
VoltValues.RemoveAt(0);
CurrentValues.RemoveAt(0);
}
});
});
}
以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。
相關文章
本文詳細講解了C#實現多線程工作流的方法，文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-02-02
這篇文章主要為大家介紹了如何利用C#及vb.net來實現合并PDF頁面內容，文中的示例代碼講解詳細，對我們學習C#有一定幫助，感興趣的小伙伴可以了解一下2022-04-04
這篇文章主要為大家詳細介紹了UnityShader3實現波浪效果，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2019-03-03
字符串替換Replace僅替換第一個字符串匹配項
C#里面的String.Replace(string,string)方法替換的時候是替換所有的匹配項，我們需要只替換第一個匹配項，寫一個方法來實現這個功能2013-12-12
本文詳細介紹了C#中委托和事件的概念、使用方法和應用場景,包括委托定義、匿名方法、Lambda表達式、事件機制和多播委托的詳細說明,委托作為類型安全的函數指針,文章還探討了如何通過匿名方法和Lambda表達式簡化委托的使用,以及多播委托在事件處理中的應用2024-10-10
C#中高效的多線程并行處理實現方式詳解
在處理大型數據集時,單線程處理往往成為性能瓶頸,所以本文將詳細介紹幾種高效的多線程并行處理實現方式,幫助開發者優化數據處理流程,有需要的可以了解下2025-04-04
本文將給大家介紹如何讓引用類型的對象復制以后各自擁有獨立的內存從而實現一個對象值的變化不會影響別的對象,文中有相關的代碼示例供大家參考,需要的朋友可以參考下2024-08-08
C#使用Protocol Buffer(ProtoBuf)進行Unity中的Socket通信
這篇文章主要介紹了C#使用Protocol Buffer(ProtoBuf)進行Unity的Socket通信的實例,Protocol Buffer是Google開發的數據格式,也是除了XML和JSON之外人氣第三高的^^需要的朋友可以參考下2016-04-04
在winform下實現左右布局多窗口界面的方法
在web頁面上我們可以通過frameset,iframe嵌套框架很容易實現各種導航+內容的布局界面，而在winform、WPF中實現其實也很容易，通過本文給大家介紹在winform下實現左右布局多窗口界面的方法，本文介紹的非常詳細，對winform布局相關知識感興趣的朋友一起學習吧2016-02-02
C#實現動態顯示及動態移除圖片方法
這篇文章主要介紹了C#實現動態顯示及動態移除圖片方法,對于C#的初學者了解圖像操作有一定的幫助,需要的朋友可以參考下2014-07-07