Android緩存機制——LruCache的詳解
概述
LruCache的核心原理就是對LinkedHashMap的有效利用,它的內部存在一個LinkedHashMap成員變量,值得注意的4個方法:構造方法、get、put、trimToSize
LRU(Least Recently Used)緩存算法便應運而生,LRU是最近最少使用的算法,它的核心思想是當緩存滿時,會優先淘汰那些最近最少使用的緩存對象。采用LRU算法的緩存有兩種:LrhCache和DisLruCache,分別用于實現內存緩存和硬盤緩存,其核心思想都是LRU緩存算法。
LRU原理
LruCache的核心思想很好理解,就是要維護一個緩存對象列表,其中對象列表的排列方式是按照訪問順序?qū)崿F(xiàn)的,即一直沒訪問的對象,將放在隊頭,即將被淘汰。而最近訪問的對象將放在隊尾,最后被淘汰。(隊尾添加元素,隊頭刪除元素)
LruCache 其實使用了 LinkedHashMap 雙向鏈表結構,現在分析下 LinkedHashMap 使用方法。
1.構造方法:
public LinkedHashMap(int initialCapacity,
float loadFactor,
boolean accessOrder) {
super(initialCapacity, loadFactor);
this.accessOrder = accessOrder;
}
當 accessOrder 為 true 時,這個集合的元素順序就會是訪問順序,也就是訪問了之后就會將這個元素放到集合的最后面。
例如:
LinkedHashMap < Integer, Integer > map = new LinkedHashMap < > (0, 0.75f, true);
map.put(0, 0);
map.put(1, 1);
map.put(2, 2);
map.put(3, 3);
map.get(1);
map.get(2);
for (Map.Entry < Integer, Integer > entry: map.entrySet()) {
System.out.println(entry.getKey() + ":" + entry.getValue());
}
輸出結果:
0:0
3:3
1:1
2:2
下面我們在LruCache源碼中具體看看,怎么應用LinkedHashMap來實現緩存的添加,獲得和刪除的:
/**
* @param maxSize for caches that do not override {@link #sizeOf}, this is
* the maximum number of entries in the cache. For all other caches,
* this is the maximum sum of the sizes of the entries in this cache.
*/
public LruCache(int maxSize) {
if (maxSize <= 0) {
throw new IllegalArgumentException("maxSize <= 0");
}
this.maxSize = maxSize;
this.map = new LinkedHashMap<K, V>(0, 0.75f, true);//accessOrder被設置為true
}
從LruCache的構造函數中可以看到正是用了LinkedHashMap的訪問順序。
2.put()方法
/**
* Caches {@code value} for {@code key}. The value is moved to the head of
* the queue.
*
* @return the previous value mapped by {@code key}.
*/
public final V put(K key, V value) {
if (key == null || value == null) {//判空,不可為空
throw new NullPointerException("key == null || value == null");
}
V previous;
synchronized (this) {
putCount++;//插入緩存對象加1
size += safeSizeOf(key, value);//增加已有緩存的大小
previous = map.put(key, value);//向map中加入緩存對象
if (previous != null) {//如果已有緩存對象,則緩存大小恢復到之前
size -= safeSizeOf(key, previous);
}
}
if (previous != null) {//entryRemoved()是個空方法,可以自行實現
entryRemoved(false, key, previous, value);
}
trimToSize(maxSize);//調整緩存大小(關鍵方法)
return previous;
}
可以看到put()方法重要的就是在添加過緩存對象后,調用 trimToSize()方法來保證內存不超過maxSize
3.trimToSize方法
再看一下trimToSize()方法:
/**
* Remove the eldest entries until the total of remaining entries is at or
* below the requested size.
*
* @param maxSize the maximum size of the cache before returning. May be -1
* to evict even 0-sized elements.
*/
public void trimToSize(int maxSize) {
while (true) {//死循環
K key;
V value;
synchronized (this) {
//如果map為空并且緩存size不等于0或者緩存size小于0,拋出異常
if (size < 0 || (map.isEmpty() && size != 0)) {
throw new IllegalStateException(getClass().getName()
+ ".sizeOf() is reporting inconsistent results!");
}
//如果緩存大小size小于最大緩存,或者map為空,不需要再刪除緩存對象,跳出循環
if (size <= maxSize) {
break;
}
// 取出 map 中最老的映射
Map.Entry<K, V> toEvict = map.eldest();
if (toEvict == null) {
break;
}
key = toEvict.getKey();
value = toEvict.getValue();
map.remove(key);
size -= safeSizeOf(key, value);
evictionCount++;
}
entryRemoved(true, key, value, null);
}
}
trimToSize()方法不斷地刪除LinkedHashMap中隊頭的元素,即近期最少訪問的,直到緩存大小小于最大值。
4. get方法
當調用LruCache的get()方法獲取集合中的緩存對象時,就代表訪問了一次該元素,將會更新隊列,保持整個隊列是按照訪問順序排序。這個更新過程就是在LinkedHashMap中的get()方法中完成的。
接著看LruCache的get()方法
/**
* Returns the value for {@code key} if it exists in the cache or can be
* created by {@code #create}. If a value was returned, it is moved to the
* head of the queue. This returns null if a value is not cached and cannot
* be created.
*/
public final V get(K key) {
if (key == null) {//key不能為空
throw new NullPointerException("key == null");
}
V mapValue;
synchronized (this) {
/獲取對應的緩存對象
mapValue = map.get(key);
if (mapValue != null) {
hitCount++;
return mapValue;
}
missCount++;
}
看到LruCache的get方法實際是調用了LinkedHashMap的get方法:
public V get(Object key) {
LinkedHashMapEntry<K,V> e = (LinkedHashMapEntry<K,V>)getEntry(key);
if (e == null)
return null;
e.recordAccess(this);//實現排序的關鍵
return e.value;
}
再接著看LinkedHashMapEntry的recordAccess方法:
/**
* This method is invoked by the superclass whenever the value
* of a pre-existing entry is read by Map.get or modified by Map.set.
* If the enclosing Map is access-ordered, it moves the entry
* to the end of the list; otherwise, it does nothing.
*/
void recordAccess(HashMap<K,V> m) {
LinkedHashMap<K,V> lm = (LinkedHashMap<K,V>)m;
if (lm.accessOrder) {//判斷是否是訪問順序
lm.modCount++;
remove();//刪除此元素
addBefore(lm.header);//將此元素移到隊尾
}
}
recordAccess方法的作用是如果accessOrder為true,把已存在的entry在調用get讀取或者set編輯后移到隊尾,否則不做任何操作。
也就是說: 這個方法的作用就是將剛訪問過的元素放到集合的最后一位
總結:
LruCache的核心原理就是對LinkedHashMap 對象的有效利用。在構造方法中設置maxSize并將accessOrder設為true,執行g(shù)et后會將訪問元素放到隊列尾,put操作后則會調用trimToSize維護LinkedHashMap的大小不大于maxSize。
以上所述是小編給大家介紹的Android緩存機制LruCache詳解整合,希望對大家有所幫助,如果大家有任何疑問請給我留言,小編會及時回復大家的。在此也非常感謝大家對腳本之家網站的支持!
相關文章
Android實現TextView中文字鏈接的4種方式介紹及代碼
Android實現TextView中文字鏈接的方式有很多種;總結起來大概有4種:用Spannable或?qū)崿F(xiàn)它的類,如SpannableString來格式,部分字符串等等,感興趣的你可以參考下2013-02-02
android socket聊天室功能實現
這篇文章主要為大家詳細介紹了android socket聊天室功能實現方法,不單純是聊天室,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-03-03
Android編程實現自定義PopupMenu樣式示例【顯示圖標與設置RadioButton圖標】
這篇文章主要介紹了Android編程實現自定義PopupMenu樣式功能,結合實例形式分析了Android顯示圖標與設置RadioButton圖標相關操作技巧,需要的朋友可以參考下2017-01-01
android 引導界面的實現方法
現在越來越多程序都有引導頁面了。網上資料不全?,F(xiàn)在自己實現下。2013-06-06
Android圖片異步加載框架Android-Universal-Image-Loader
這篇文章主要介紹了Android圖片異步加載框架Android-Universal-Image-Loader,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2018-05-05

