Spark隨機森林實現票房預測
前言
最近一段時間都在處理電影領域的數據, 而電影票房預測是電影領域數據建模中的一個重要模塊, 所以我們針對電影數據做了票房預測建模.
前期工作
一開始的做法是將這個問題看待成回歸的問題, 采用GBDT回歸樹去做. 訓練了不同殘差的回歸樹, 然后做集成學習. 考慮的影響因子分別有電影的類型, 豆瓣評分, 導演的 影響力, 演員的影響力, 電影的出品公司. 不過預測的結果并不是那么理想, 準確率為真實值的0.3+/-區間情況下的80%, 且波動性較大, 不容易解析.
后期的改進
總結之前的失敗經驗, 主要歸納了以下幾點:
1.影響因子不夠多, 難以建模
2.票房成績的區間較大(一百萬到10億不等),分布不均勻, 大多數集中與億級, 所以不適合采用回歸方法解決.
3.數據樣本量比較少, 不均勻, 預測百萬級的電影較多, 影響預測結果
后期, 我們重新規范了數據的輸入格式, 即影響因子, 具體如下:
第一行: 電影名字
第二行: 電影票房(也就是用于預測的, 以萬為單位)
第三行: 電影類型
第四行: 片長(以分鐘為單位)
第五行:上映時間(按月份)
第六行: 制式( 一般分為2D, 3D, IMAX)
第七行: 制作國家
第八行: 導演影響 (以導演的平均票房成績?yōu)楹饬? 以萬為單位 )
第九行: 演員影響 ( 以所有演員的平均票房成績?yōu)楹饬? 以萬為單位 )
第十行:制作公司影響 ( 以所有制作公司的平均票房成績?yōu)楹饬? 以萬為單位 )
第十一行: 發行公式影響 ( 以所有制作公司的平均票房成績?yōu)楹饬?以萬為單位 )
收集了05-17年的來自中國,日本,美國,英國的電影, 共1058部電影. 由于處理成為分類問題, 故按將電影票房分為以下等級:

在構建模型之前, 先將數據處理成libsvm格式文件, 然后采用隨機森林模型訓練.
隨機森林由許多的決策樹組成, 因為這些決策樹的形成采用隨機的策略, 每個決策樹都隨機生成, 相互之間獨立.模型最后輸出的類別是由每個樹輸出的類別的眾數而定.在構建每個決策樹的時候采用的策略是信息熵, 決策樹為多元分類決策樹.隨機森林的流程圖如下圖所示:

隨機森林是采用spark-mllib提供的random forest, 由于超過10億的電影的數據相對比較少, 為了平衡各數據的分布, 采用了過分抽樣的方法, 訓練模型的代碼如下:
public void predict() throws IOException{
SparkConf conf = new SparkConf().setAppName("SVM").setMaster("local");
conf.set("spark.testing.memory", "2147480000");
SparkContext sc = new SparkContext(conf);
SQLContext sqlContext = new SQLContext(sc);
// Load and parse the data file, converting it to a DataFrame.
DataFrame trainData = sqlContext.read().format("libsvm").load(this.trainFile);
DataFrame testData = sqlContext.read().format("libsvm").load(this.testFile);
// Index labels, adding metadata to the label column.
// Fit on whole dataset to include all labels in index.
StringIndexerModel labelIndexer = new StringIndexer()
.setInputCol("label")
.setOutputCol("indexedLabel")
.fit(trainData);
// Automatically identify categorical features, and index them.
// Set maxCategories so features with > 4 distinct values are treated as continuous.
VectorIndexerModel featureIndexer = new VectorIndexer()
.setInputCol("features")
.setOutputCol("indexedFeatures")
.setMaxCategories(4)
.fit(trainData);
// Split the data into training and test sets (30% held out for testing)
// DataFrame[] splits = trainData.randomSplit(new double[] {0.9, 0.1});
// trainData = splits[0];
// testData = splits[1];
// Train a RandomForest model.
RandomForestClassifier rf = new RandomForestClassifier()
.setLabelCol("indexedLabel")
.setFeaturesCol("indexedFeatures")
.setNumTrees(20);
// Convert indexed labels back to original labels.
IndexToString labelConverter = new IndexToString()
.setInputCol("prediction")
.setOutputCol("predictedLabel")
.setLabels(labelIndexer.labels());
// Chain indexers and forest in a Pipeline
Pipeline pipeline = new Pipeline()
.setStages(new PipelineStage[] {labelIndexer, featureIndexer, rf, labelConverter});
// Train model. This also runs the indexers.
PipelineModel model = pipeline.fit(trainData);
// Make predictions.
DataFrame predictions = model.transform(testData);
// Select example rows to display.
predictions.select("predictedLabel", "label", "features").show(200);
// Select (prediction, true label) and compute test error
MulticlassClassificationEvaluator evaluator = new MulticlassClassificationEvaluator()
.setLabelCol("indexedLabel")
.setPredictionCol("prediction")
.setMetricName("precision");
double accuracy = evaluator.evaluate(predictions);
System.out.println("Test Error = " + (1.0 - accuracy));
RandomForestClassificationModel rfModel = (RandomForestClassificationModel)(model.stages()[2]);
// System.out.println("Learned classification forest model:\n" + rfModel.toDebugString());
DataFrame resultDF = predictions.select("predictedLabel");
JavaRDD<Row> resultRow = resultDF.toJavaRDD();
JavaRDD<String> result = resultRow.map(new Result());
this.resultList = result.collect();
for(String one: resultList){
System.out.println(one);
}
}
下面為其中一個的決策樹情況:
Tree 16 (weight 1.0):
If (feature 10 in {0.0})
If (feature 48 <= 110.0)
If (feature 86 <= 13698.87)
If (feature 21 in {0.0})
If (feature 54 in {0.0})
Predict: 0.0
Else (feature 54 not in {0.0})
Predict: 1.0
Else (feature 21 not in {0.0})
Predict: 0.0
Else (feature 86 > 13698.87)
If (feature 21 in {0.0})
If (feature 85 <= 39646.9)
Predict: 2.0
Else (feature 85 > 39646.9)
Predict: 3.0
Else (feature 21 not in {0.0})
Predict: 3.0
Else (feature 48 > 110.0)
If (feature 85 <= 15003.3)
If (feature 9 in {0.0})
If (feature 54 in {0.0})
Predict: 0.0
Else (feature 54 not in {0.0})
Predict: 2.0
Else (feature 9 not in {0.0})
Predict: 2.0
Else (feature 85 > 15003.3)
If (feature 65 in {0.0})
If (feature 85 <= 66065.0)
Predict: 3.0
Else (feature 85 > 66065.0)
Predict: 2.0
Else (feature 65 not in {0.0})
Predict: 3.0
Else (feature 10 not in {0.0})
If (feature 51 in {0.0})
If (feature 85 <= 6958.4)
If (feature 11 in {0.0})
If (feature 50 <= 1.0)
Predict: 1.0
Else (feature 50 > 1.0)
Predict: 0.0
Else (feature 11 not in {0.0})
Predict: 0.0
Else (feature 85 > 6958.4)
If (feature 5 in {0.0})
If (feature 4 in {0.0})
Predict: 3.0
Else (feature 4 not in {0.0})
Predict: 1.0
Else (feature 5 not in {0.0})
Predict: 2.0
Else (feature 51 not in {0.0})
If (feature 48 <= 148.0)
If (feature 0 in {0.0})
If (feature 6 in {0.0})
Predict: 2.0
Else (feature 6 not in {0.0})
Predict: 0.0
Else (feature 0 not in {0.0})
If (feature 50 <= 4.0)
Predict: 2.0
Else (feature 50 > 4.0)
Predict: 3.0
Else (feature 48 > 148.0)
If (feature 9 in {0.0})
If (feature 49 <= 3.0)
Predict: 2.0
Else (feature 49 > 3.0)
Predict: 0.0
Else (feature 9 not in {0.0})
If (feature 36 in {0.0})
Predict: 3.0
Else (feature 36 not in {0.0})
Predict: 2.0
后記
該模型預測的平均準確率為80%, 但相對之前的做法規范了很多, 對結果的解析也更加的合理, 不過如何增強預測的效果, 可以考慮更多的因子, 形如:電影是否有前續;電影網站的口碑指數;預告片的播放量;相關微博的閱讀數;百度指數等;
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
相關文章
Java 中如何使用 JavaFx 庫標注文本顏色
這篇文章主要介紹了在 Java 中用 JavaFx 庫標注文本顏色,在本文中,我們將了解如何更改標簽的文本顏色,并且我們還將看到一個必要的示例和適當?shù)慕忉?,以便更容易理解該主題,需要的朋友可以參考下2023-05-05
Java中Comparator與Comparable排序的區別詳解
這篇文章主要介紹了Java中Comparator與Comparable排序的區別詳解,如果你有一個類,希望支持同類型的自定義比較策略,可以實現接口Comparable,如果某個類,沒有實現Comparable,但是又希望對它進行比較,則可以自定義一個Comparator,需要的朋友可以參考下2024-01-01
MyBatis-plus+達夢數據庫實現自動生成代碼的示例
這篇文章主要介紹了MyBatis-plus+達夢數據庫實現自動生成代碼的示例,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2020-08-08
SpringBoot項目讀取外置logback配置文件的問題及解決
SpringBoot項目讀取外置logback配置文件的問題及解決,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2022-08-08
MyBatis中的SQL映射文件如何配置參數映射和使用方法
MyBatis 是一種開源的 Java 持久化框架,它可以自動將數據庫中的數據映射到 Java 對象中,并且使得 Java 對象可以非常方便地存儲到數據庫中,本文將介紹 MyBatis 中 SQL 映射文件的參數映射配置和使用方法,需要的朋友可以參考下2023-07-07
JavaWeb 文件的上傳和下載功能簡單實現代碼
這篇文章主要介紹了JavaWeb 文件的上傳和下載功能簡單實現代碼,需要的朋友可以參考下2017-04-04

