快捷導航

RecyclerView實現列表倒計時

更新時間：2021年01月29日 11:11:31 作者：jcjkobe123

這篇文章主要為大家詳細介紹了RecyclerView實現列表倒計時，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下

最近在做一個項目，需要用到列表倒計時功能，搗鼓半天終于弄了出來，在安卓中實現這個效果需要用到Countdowntimer,通過這個類的使用，不僅可以實現倒計時的效果，還可以完美解決在實現倒計時過程中的兩個bug。

1.內存問題
2.由于recyclerview的item復用導致不同條目的時間錯亂

首先看下實現的最終效果

如何顯示列表我相信大家都會，這里我只附上和倒計時功能實現的adapter類。

public class ClockAdapter extends RecyclerView.Adapter<ClockAdapter.ClockViewHolder> {
 private SparseArray<CountDownTimer> countDownMap = new SparseArray<>();

 @Override
 public ClockViewHolder onCreateViewHolder(ViewGroup parent, int viewType) {
 View view = LayoutInflater.from(parent.getContext()).inflate(R.layout.item_rv, parent, false);

 return new ClockViewHolder(view);
 }
 /**
 * 清空資源
 */
 public void cancelAllTimers() {
 if (countDownMap == null) {
  return;
 }
 for (int i = 0,length = countDownMap.size(); i < length; i++) {
  CountDownTimer cdt = countDownMap.get(countDownMap.keyAt(i));
  if (cdt != null) {
  cdt.cancel();
  }
 }
 }

 @Override
 public void onBindViewHolder(final ClockViewHolder holder, int position) {
 long betweenDate;
 if (position == 0) {
  betweenDate= DateUtil.getLeftTime("2017-8-8 12:10:10");
 } else {
  betweenDate= DateUtil.getLeftTime("2017-8-9 15:10:10");
 }

 if (holder.countDownTimer != null) {
  holder.countDownTimer.cancel();
 }

 if (betweenDate > 0) {
  holder.countDownTimer = new CountDownTimer(betweenDate, 1000) {
  public void onTick(long millisUntilFinished) {
   millisUntilFinished = millisUntilFinished / 1000;
   int hours = (int) (millisUntilFinished / (60 * 60));
   int leftSeconds = (int) (millisUntilFinished % (60 * 60));
   int minutes = leftSeconds / 60;
   int seconds = leftSeconds % 60;

   final StringBuffer sBuffer = new StringBuffer();
   sBuffer.append(addZeroPrefix(hours));
   sBuffer.append(":");
   sBuffer.append(addZeroPrefix(minutes));
   sBuffer.append(":");
   sBuffer.append(addZeroPrefix(seconds));
   holder.clock.setText(sBuffer.toString());
  }
  public void onFinish() {
//   時間結束后進行相應邏輯處理
  }
  }.start();
  countDownMap.put(holder.clock.hashCode(), holder.countDownTimer);
 } else {
//  時間結束 進行相應邏輯處理
 }


 }

 @Override
 public int getItemCount() {
 return 25;
 }

 class ClockViewHolder extends RecyclerView.ViewHolder {

 TextView clock;
 CountDownTimer countDownTimer;

 public ClockViewHolder(View itemView) {
  super(itemView);
  clock = (TextView) itemView.findViewById(R.id.clock);
 }
 }
}

其中cancelAllTimer()這個方法解決了內存的問題，通過這行代碼，將item的hashcode作為key設入SparseArray中，這樣在cancelAllTimer方法中可以一個一個取出來進行倒計時取消操作。

countDownMap.put(holder.clock.hashCode(),holder.countDownTimer);

接著通過下面這行代碼新建一個CountDownTimer類

holder.countDownTimer = new CountDownTimer(betweenDate, 1000) {
 public void onTick(long millisUntilFinished) {
 millisUntilFinished = millisUntilFinished / 1000;
 int hours = (int) (millisUntilFinished / (60 * 60));
 int leftSeconds = (int) (millisUntilFinished % (60 * 60));
 int minutes = leftSeconds / 60;
 int seconds = leftSeconds % 60;
 final StringBuffer sBuffer = new StringBuffer();
 sBuffer.append(addZeroPrefix(hours));
 sBuffer.append(":")  sBuffer.append(addZeroPrefix(minutes));
   sBuffer.append(":");
   sBuffer.append(addZeroPrefix(seconds));
   holder.clock.setText(sBuffer.toString());
}
public void onFinish() {
// 時間結束后進行相應邏輯處理
}
}.start();

分析它的源碼

public CountDownTimer(long millisInFuture, long countDownInterval) {
 mMillisInFuture = millisInFuture;
 mCountdownInterval = countDownInterval;
 }

從中可以很清楚的看出，設置了兩個值，第一個是倒計時結束時間，第二個是刷新時間的間隔時間。
然后通過start方法進行啟動，接著看下start方法中進行的處理

public synchronized final CountDownTimer start() {
 mCancelled = false;
 if (mMillisInFuture <= 0) {
  onFinish();
  return this;
 }
 mStopTimeInFuture = SystemClock.elapsedRealtime() + mMillisInFuture;
 mHandler.sendMessage(mHandler.obtainMessage(MSG));
 return this;
 }

源碼中，當?shù)褂?jì)時截止時間小于等0時也就是倒計時結束時，調用了onFinish方法，若時間還未結束，則通過handler的異步消息機制，將消息進行發出，通過一整個流程，最終方法會走到handler的handleMessage方法中，如果有不熟悉這個異步流程的伙伴，可以去看我以前寫的一篇異步消息機制的文章 android異步消息機制，源碼層面徹底解析。好了，接下來就來看看handler的handleMessage方法。

private Handler mHandler = new Handler() {

 @Override
 public void handleMessage(Message msg) {

 synchronized (CountDownTimer.this) {
 if (mCancelled) {
  return;
 }

 final long millisLeft = mStopTimeInFuture - SystemClock.elapsedRealtime();

 if (millisLeft <= 0) {
  onFinish();
 } else if (millisLeft < mCountdownInterval) {
 // no tick, just delay until done
 sendMessageDelayed(obtainMessage(MSG), millisLeft);
 } else {
long lastTickStart=SystemClock.elapsedRealtime();
  onTick(millisLeft);
 // take into account user's onTick taking time to execute
 long delay = lastTickStart + mCountdownInterval - SystemClock.elapsedRealtime();

// special case: user's onTick took more than interval to
// complete, skip to next interval
 while (delay < 0) delay += mCountdownInterval;
 sendMessageDelayed(obtainMessage(MSG), delay);
  }
  }
 }
 };

相信這段源碼還是很通熟易懂，首先計算出剩余時間，如果剩余時間小于刷新時間，就發送一條延時消息直到時間結束，如果剩余時間大于刷新時間就調用onTick(millisLeft)方法，這個方法在我們創建CountDownTimer類時就進行過重寫，在里面就可以寫我們倒計時展示的具體邏輯了。至此整個流程結束。

以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。

您可能感興趣的文章: