Python TCPServer 多線程多客戶端通信的實現

更新時間：2019年12月31日 14:28:01 作者：東南飄雪

這篇文章主要介紹了Python TCPServer 多線程多客戶端通信的實現,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧

最簡單、原始的TCP通信demo

服務端Http請求：

import socket

# 創建一個servicesocke
serviceSocket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)

# 給服務器綁定地址(ip地址,端口號)
serviceSocket.bind(("192.168.171.1", 80))

print("等待客戶端接入")
# sock 是客戶端的socket信息
# addr 是客戶端的地址(ip,端口)
sock, addr = serviceSocket.accept()
print(f"sock from client:{sock}")
print(f"addr of client:{addr}")

while True:
  # 接收客戶端的請求
  recvData = sock.recv(1024)
  print("客戶端說:%s" % (recvData.decode("utf-8")))
  sendData = input("服務器說:")
  # 發送(回復)數據給客戶端
  sock.send(sendData.encode("utf-8"))

客戶端Http請求：

import socket

# 創建客戶端socket
clientSocket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)

# 連接服務器
clientSocket.connect(("192.168.171.1", 80))

while True:
  # 發送消息給服務器
  sendData = input("客戶端說:")
  if sendData == "bye":
    clientSocket.send(sendData.encode("utf-8")) # 編碼:將數據裝換成二進制形式
    break
  clientSocket.send(sendData.encode("utf-8"))
  recvData = clientSocket.recv(1024)
  print("服務器說:%s" % (recvData.decode("utf-8"))) # 解碼:將二進制轉換成字符

1、在TCP中，客戶端的實現流程：

創建客戶端的socket對象建立與服務器之間的聯系發送請求接收數據關閉連接

2、服務端的實現流程：

創建服務端的socket對象綁定服務端的地址設置監聽器等待客戶端的連接接收客戶端的請求返回處理的結果到客戶端

ThreadingTCPServer 多線程多客戶端通信自動重連demo

socketserver繼承圖：

[外鏈圖片轉存失敗,源站可能有防盜鏈機制,建議將圖片保存下來直接上傳(img-RP9L9E1X-1577626400313)(../../../markdown_pic/blog_socketserver.png)]

TCPServer

# from socketserver import TCPServer, BaseRequestHandler, ThreadingTCPServer
from socketserver import TCPServer, StreamRequestHandler, ThreadingMixIn
import traceback

# class MyBaseRequestHandler(BaseRequestHandler):
class MyBaseRequestHandler(StreamRequestHandler):

  def handle(self):
    self.addr = self.request.getpeername()
    self.server.users[self.addr[1]] = self.request
    message = "IP " + self.addr[0] + ":" + str(self.addr[1]) + " Connected..."
    print(message)

    while True:
      try:
        data = self.request.recv(1024).decode('UTF-8', 'ignore').strip()
        print(f'receive from {self.client_address}:{data}')

        back_data = (f"response\"" + data + "\":\n").encode("utf8")
        self.request.sendall(back_data)
      except:
        traceback.print_exc()
        break

# 源碼：class ThreadingTCPServer(ThreadingMixIn, TCPServer): pass
# 從ThreadingMixIn和TCPServer繼承，實現多線程
class MyThreadingTCPServer(ThreadingMixIn, TCPServer):
  def __init__(self, server_address, RequestHandlerClass):
    TCPServer.__init__(self, server_address, RequestHandlerClass)
    self.users = {}


class MyTCPserver():
  def __init__(self, server_addr='192.168.1.109', server_port=23):
    self.server_address = server_addr
    self.server_port = server_port
    self.server_tuple = (self.server_address, self.server_port)

  def run(self):
    # server = TCPServer(self.server_tuple, MyBaseRequestHandler)
    server = MyThreadingTCPServer(self.server_tuple, MyBaseRequestHandler)
    server.serve_forever()


if __name__ == '__main__':
  myserver = MyTCPserver()
  myserver.run()

在telnet 下開啟開啟兩個客戶端，本電腦的IP為192.168.1.109，開兩個客戶端后，TCPServer的終端出現同一個IP但是不同端口的連接：

[外鏈圖片轉存失敗,源站可能有防盜鏈機制,建議將圖片保存下來直接上傳(img-LRSXfXoG-1577626400318)(../../../markdown_pic/blog_TCPServer.png)]

TCPClient

import socket
import time

class MyClient:
  host = '192.168.1.109'
  port = 23
  bufsiz = 1024
  addr = None
  skt = None

  def __init__(self, host=None, port=None):
    if host != None:
      self.host = host

    if port != None:
      self.port = port

    if self.addr == None:
      self.addr = (self.host, self.port)

    self.doConnection()

  def doConnection(self):
    try:
      self.skt = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
      self.skt.setsockopt(socket.SOL_SOCKET, socket.SO_KEEPALIVE, 1)
      print(self.addr)
      self.skt.connect(self.addr)
    except:
      pass

  def run(self):
    while True:
      try:
        _time = time.strftime("%Y-%m-%d %H:%M:%S", time.localtime())
        self.skt.sendall(f'{_time}:i am clent1 '.encode('utf-8'))
        data = self.skt.recv(self.bufsiz)
        print(data.decode('utf-8', 'ignore'))
        if not data:
          break
        print(data.strip())
        time.sleep(5)
      except socket.error:
        print('socket error, reconnection') # 自動重連
        time.sleep(3)
        self.doConnection()
      except:
        print('other error')

    self.skt.close()


myclient = MyClient()
myclient.run()

上面用的是telnet工具來作為客戶端，這里是用代碼實現模擬的客戶端。

在這里插入圖片描述