# -*- coding: utf-8 -*-
"""
Created on Sun Feb 16 11:27:19 2020
調用HEG相關工具批處理MODIS數據，主要完成投影坐標轉換與重采樣
@author: pan
"""
import os

# 設置HEG相關環境變量
os.environ['MRTDATADIR']='D:/MyApps/HEG/HEG_Win/data'
os.environ['PGSHOME']='D:/MyApps/HEG/HEG_Win/TOOLKIT_MTD'
os.environ['MRTBINDIR']='D:/MyApps/HEG/HEG_Win/bin'

# 設置HEG的bin路徑
hegpath = 'D:/MyApps/HEG/HEG_Win/bin'
# 指定處理模塊的可執行程序文件路徑，此處采用resample.exe，可以根據具體的處理問題設置
hegdo = os.path.join(hegpath, 'resample.exe')
hegdo = hegdo.replace('\\', '/') # 全路徑以“/”連接

# 指定輸入數據的路徑
inpath = r'C:\Users\pan\Desktop\Py_ex\data\hdf'
inpath = inpath.replace('\\', '/')
# 指定輸出數據的路徑
outpath = r'C:\Users\pan\Desktop\Py_ex\data\hdf\out'
outpath = outpath.replace('\\', '/')
# os.chdir(inpath) #改變當前工作目錄到輸入數據目錄

# 獲取當前文件夾下的所有hdf文件
allfiles = os.listdir(inpath)
allhdffiles = []
for eachfile in allfiles:
  if os.path.splitext(eachfile)[1] =='.hdf':
    allhdffiles.append(eachfile)
print('--'*20)
print('文件數量為:', len(allhdffiles),',所有hdf文件如下')
print(' '+'\n '.join(allhdffiles))
print('--'*20)

# prm文件設置模塊，需要首先在HEG工具中生成一個參考的prm文件，示例如下
# 設置prm文件存儲路徑
prmpath = r"C:\Users\pan\Desktop\Py_ex\data\hdf\prm"
prmpath = prmpath.replace('\\', '/')
for eachhdf in allhdffiles:
  prm=['NUM_RUNS = 1\n',
   'BEGIN\n',
   'INPUT_FILENAME = ' + inpath+'/'+eachhdf+'\n',
   'OBJECT_NAME = MODIS_Grid_8Day_1km_LST|\n',
   'FIELD_NAME = LST_Day_1km\n',
   'BAND_NUMBER = 1\n','SPATIAL_SUBSET_UL_CORNER = ( 90.0 -180.0 )\n',
   'SPATIAL_SUBSET_LR_CORNER = ( -90.0 180 )\n',
   'RESAMPLING_TYPE = BI\n',
   'OUTPUT_PROJECTION_TYPE = ALBERS\n',
   'ELLIPSOID_CODE = WGS84\n',
   'OUTPUT_PROJECTION_PARAMETERS = ( 0.0 0.0 25.0 47.0 105.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 )\n',
   'OUTPUT_PIXEL_SIZE = 500.0\n',
   'OUTPUT_FILENAME = ' + outpath+'/'+eachhdf+'_out.tif\n',
   'OUTPUT_TYPE = GEO\n',
   'END\n']
  prmfilename=prmpath +'/'+ eachhdf+'.prm'
  prmfilename=prmfilename.replace('\\', '/')
  #這里一定要注意，設定換行符為‘\n',否則由于在windows系統下默認換行符為‘\r\n',則無法運行成功
  fo=open(prmfilename,'w',newline='\n')
  fo.writelines(prm)
  fo.close()

for eachhdf in allhdffiles:
  prmfilepath=prmpath +'\\'+ eachhdf + '.prm'
  prmfilepath=prmfilepath.replace('\\', '/')
  try:
    resamplefiles = '{0} -P {1}'.format(hegdo, prmfilepath)
    os.system(resamplefiles)    
    print(eachhdf + ' has finished')
  except:
    # 提示錯誤信息
    print(eachhdf + 'was wrong')