iOS自定義View實現卡片滑動
更新時間：2020年02月21日 10:40:38 作者：早起的年輕人
這篇文章主要為大家詳細介紹了ios自定義View實現卡片滑動效果，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下
本文實例為大家分享了iOS自定義View實現卡片滑動效果的具體代碼，供大家參考，具體內容如下
說明
控件基于UIView封裝完成，采用UIPanGestureRecognizer監聽自身的觸摸事件，以此處理各種滑動動畫操作。
內容之間可以循環切換，采用類似tableView加載機制，達到復用效果
效果
代碼實現
#import <UIKit/UIKit.h> @class SMSwipeView; @protocol SMSwipeDelegate <NSObject> @required //獲取顯示數據內容 -(UITableViewCell*)SMSwipeGetView:(SMSwipeView*)swipe withIndex:(int)index; //獲取數據源總量 -(NSInteger)SMSwipeGetTotaleNum:(SMSwipeView*)swipe; @end @interface SMSwipeView : UIView @property(nonatomic,weak)id<SMSwipeDelegate> delegate; //層疊透明方式顯示 默認NO @property(nonatomic,assign)BOOL isStackCard; //加載方法 -(void)reloadData; //根據id獲取緩存的cell -(UITableViewCell*)dequeueReusableUIViewWithIdentifier:(NSString*)identifier; @end
#import "SMSwipeView.h"
#define degreeTOradians(x) (M_PI * (x)/180)
//childView距離父View左右的距離
const int LEFT_RIGHT_MARGIN=10;
//當前view距離父view的頂部的值
const int TOP_MARGTIN=16;
@interface SMSwipeView()
//已經劃動到邊界外的一個view
@property(nonatomic,weak)UITableViewCell * viewRemove;
//放當前顯示的子View的數組
@property(nonatomic,strong)NSMutableArray * cacheViews;
//view總共的數量
@property(nonatomic,assign)int totalNum;
//當前的下標
@property(nonatomic,assign)int nowIndex;
//觸摸開始的坐標
@property(nonatomic,assign)CGPoint pointStart;
//上一次觸摸的坐標
@property(nonatomic,assign)CGPoint pointLast;
//最后一次觸摸的坐標
@property(nonatomic,assign)CGPoint pointEnd;
//正在顯示的cell
@property(nonatomic,weak)UITableViewCell * nowCell;
//下一個cell
@property(nonatomic,weak)UITableViewCell * nextCell;
//第三個cell
@property(nonatomic,weak)UITableViewCell * thirdCell;
//自身的寬度
@property(nonatomic,assign)int w;
//自身的高度
@property(nonatomic,assign)int h;
//是否是第一次執行
@property(nonatomic,assign)BOOL isFirstLayoutSub;
@end
@implementation SMSwipeView
//從xib中加載該類
-(void)awakeFromNib{
[super awakeFromNib];
[self initSelf];
}
//直接用方法初始化
-(instancetype)initWithFrame:(CGRect)frame{
self=[super initWithFrame:frame];
[self initSelf];
return self;
}
//進行一些自身的初始化和設置
-(void)initSelf{
self.clipsToBounds=YES;
self.cacheViews=[[NSMutableArray alloc]init];
//手勢識別
UIPanGestureRecognizer * pan=[[UIPanGestureRecognizer alloc]initWithTarget:self action:@selector(pan:)];
[self addGestureRecognizer:pan];
}
//布局subview的方法
-(void)layoutSubviews{
if(!self.isFirstLayoutSub){
self.isFirstLayoutSub=YES;
self.w=self.bounds.size.width;
self.h=self.bounds.size.height;
[self reloadData];
}
}
//重新加載數據方法，會再首次執行l(wèi)ayoutSubviews的時候調用
-(void)reloadData{
if (!self.delegate||![self.delegate respondsToSelector:@selector(SMSwipeGetView:withIndex:)]||![self.delegate respondsToSelector:@selector(SMSwipeGetTotaleNum:)]) {
return;
}
self.totalNum=(int)[self.delegate SMSwipeGetTotaleNum:self];
self.viewRemove=nil;
UITableViewCell * nowCell=[self.delegate SMSwipeGetView:self withIndex:self.nowIndex];
UITableViewCell * nextCell=[self.delegate SMSwipeGetView:self withIndex:self.nowIndex+1<self.totalNum?self.nowIndex+1:0];
UITableViewCell * thirdCell=[self.delegate SMSwipeGetView:self withIndex:self.nowIndex+2<self.totalNum?self.nowIndex+2:self.nowIndex+2-self.totalNum];
if (self.isStackCard) {
[thirdCell setAlpha:0.3f];
[nextCell setAlpha:0.5f];
[nowCell setAlpha:1];
}
[thirdCell removeFromSuperview];
thirdCell.layer.anchorPoint=CGPointMake(1, 1);
thirdCell.frame=CGRectMake(LEFT_RIGHT_MARGIN*2, 0, self.w-2*2*LEFT_RIGHT_MARGIN, self.h-TOP_MARGTIN);
[self addSubview:thirdCell];
self.thirdCell=thirdCell;
[nextCell removeFromSuperview];
nextCell.layer.anchorPoint=CGPointMake(1, 1);
nextCell.frame=CGRectMake(LEFT_RIGHT_MARGIN, TOP_MARGTIN/2*1, self.w-2*LEFT_RIGHT_MARGIN, self.h-TOP_MARGTIN);
[self addSubview:nextCell];
self.nextCell=nextCell;
[nowCell removeFromSuperview];
nowCell.layer.anchorPoint=CGPointMake(1, 1);
nowCell.frame=CGRectMake(0, TOP_MARGTIN, self.w, self.h-TOP_MARGTIN);
[self addSubview:nowCell];
self.nowCell=nowCell;
}
#pragma mark swipe觸摸的相關手勢處理
-(void)swipe:(UISwipeGestureRecognizer*)sender{
NSLog(@"swipe");
}
-(void)pan:(UIPanGestureRecognizer*)sender{
CGPoint translation = [sender translationInView: self];
//CGPoint speed=[sender velocityInView:self];//獲取速度
if (sender.state==UIGestureRecognizerStateBegan) {
//NSLog(@"begin");
self.pointStart=translation;
self.pointLast=translation;
}
if (sender.state==UIGestureRecognizerStateChanged) {
//NSLog(@"change");
// CGFloat xMove=translation.x-self.pointLast.x;
// CGFloat yMove=translation.y-self.pointLast.y;
// self.pointLast=translation;
//
// CGPoint center=self.nowCell.center;
// self.nowCell.center=CGPointMake(center.x+xMove, center.y+yMove);
CGFloat xTotalMove=translation.x-self.pointStart.x;
// if (xTotalMove<0) {
// self.nowCell.transform = CGAffineTransformMakeRotation(degreeTOradians(90*xTotalMove/self.w));
// self.nextCell.transform= CGAffineTransformMakeRotation(degreeTOradians(90*xTotalMove/self.w/2));
// }else{
// self.nowCell.transform = CGAffineTransformMakeRotation(degreeTOradians(0));
// self.nextCell.transform= CGAffineTransformMakeRotation(degreeTOradians(0));
// }
}
if (sender.state==UIGestureRecognizerStateEnded) {
//NSLog(@"end");
CGFloat xTotalMove=translation.x-self.pointStart.x;
if (xTotalMove<0) {
[self swipeEnd];
}else{
[self swipeGoBack];
}
}
// NSLog(@"%@%f%@%f",@"x:",speed.x,@"y:",speed.y);
//NSLog(@"%@%f%@%f",@"x:",translation.x,@"y:",translation.y);
}
/**
* @author StoneMover, 16-12-29 14:12:33
*
* @brief 獲取為顯示的cell,復用機制
*
* @param identifier id標志
*
* @return 返回的cell,如果緩存中沒有則返回空
*/
-(UITableViewCell*)dequeueReusableUIViewWithIdentifier:(NSString *)identifier{
for (UITableViewCell * cell in self.cacheViews) {
if ([identifier isEqualToString:cell.reuseIdentifier]) {
[self.cacheViews removeObject:cell];
return cell;
}
}
return nil;
}
//滑動到下一個界面
-(void)swipeEnd{
[UIView animateWithDuration:0.3 animations:^{
self.nextCell.transform= CGAffineTransformMakeRotation(degreeTOradians(0));
}];
//self.nowCell.transform= CGAffineTransformMakeRotation(degreeTOradians(0));
CGPoint center=self.nowCell.center;
[UIView animateWithDuration:0.3 animations:^{
self.nowCell.center=CGPointMake(center.x-self.w, center.y);
self.nowCell.transform= CGAffineTransformMakeRotation(degreeTOradians(0));
// [self.nowCell setAlpha:0.0];
} completion:^(BOOL finished) {
self.nowIndex++;
self.nowIndex=self.nowIndex<self.totalNum?self.nowIndex:0;
if (self.viewRemove&&[self isNeedAddToCache:self.viewRemove]) {
[self.cacheViews addObject:self.viewRemove];
[self.viewRemove removeFromSuperview];
}
self.viewRemove=self.nowCell;
//self.viewRemove.layer.anchorPoint=CGPointMake(0, 0);
//self.viewRemove.transform=CGAffineTransformMakeRotation(degreeTOradians(-35));
self.nowCell=self.nextCell;
self.nextCell=self.thirdCell;
UITableViewCell * thirdCell=[self.delegate SMSwipeGetView:self withIndex:self.nowIndex+2<self.totalNum?(int)self.nowIndex+2:(int)self.nowIndex+2-(int)self.totalNum];
[thirdCell removeFromSuperview];
thirdCell.layer.anchorPoint=CGPointMake(1, 1);
thirdCell.frame=CGRectMake(LEFT_RIGHT_MARGIN*2, 0, self.w-2*2*LEFT_RIGHT_MARGIN, self.h-TOP_MARGTIN);
self.thirdCell=thirdCell;
if (self.isStackCard) {
[self.thirdCell setAlpha:0.3f];
[self.nextCell setAlpha:0.5f];
[self.nowCell setAlpha:1];
}
[self insertSubview:thirdCell belowSubview:self.nextCell];
[UIView animateWithDuration:0.2 animations:^{
self.nowCell.frame=CGRectMake(0, TOP_MARGTIN, self.w, self.h-TOP_MARGTIN);
self.nextCell.frame=CGRectMake(LEFT_RIGHT_MARGIN, TOP_MARGTIN/2*1, self.w-2*LEFT_RIGHT_MARGIN, self.h-TOP_MARGTIN);
}];
}];
}
//滑動到上一個界面
-(void)swipeGoBack{
if (!self.viewRemove) {
NSLog(@"!viewRemove");
return;
}
if (self.nowIndex==0) {
NSLog(@"!viewRemove+index");
return;
}
CGPoint center=self.viewRemove.center;
self.nowIndex--;
// if ([self isNeedAddToCache:self.thirdCell]) {
// [self.cacheViews addObject:self.thirdCell];
// }
[self.thirdCell removeFromSuperview];
self.thirdCell=self.nextCell;
self.nextCell=self.nowCell;
self.nowCell=self.viewRemove;
if (self.nowIndex==0) {
self.viewRemove=nil;
}else{
UITableViewCell * cell=[self.delegate SMSwipeGetView:self withIndex:(int)self.nowIndex-1];
[cell removeFromSuperview];
[self insertSubview:cell aboveSubview:self.nowCell];
cell.layer.anchorPoint=CGPointMake(1, 1);
cell.frame=self.viewRemove.frame;
self.viewRemove=cell;
}
[UIView animateWithDuration:.5 animations:^{
self.nowCell.center=CGPointMake(center.x+self.w, center.y);
self.nowCell.transform= CGAffineTransformMakeRotation(degreeTOradians(0));
self.nextCell.frame=CGRectMake(LEFT_RIGHT_MARGIN, TOP_MARGTIN/2*1, self.w-2*LEFT_RIGHT_MARGIN, self.h-TOP_MARGTIN);
self.thirdCell.frame=CGRectMake(LEFT_RIGHT_MARGIN*2, 0, self.w-2*2*LEFT_RIGHT_MARGIN, self.h-TOP_MARGTIN);
}];
}
//是否需要加入到緩存中去
-(BOOL)isNeedAddToCache:(UITableViewCell*)cell{
for (UITableViewCell * cellIn in self.cacheViews) {
if ([cellIn.reuseIdentifier isEqualToString:cell.reuseIdentifier]) {
return NO;
}
}
return YES;
}
@end
源碼下載 點擊查看
以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。
相關文章
這篇文章主要介紹了iOS 進度條、加載、安裝動畫的簡單實現,非常不錯，具有參考借鑒價值，需要的朋友可以參考下2017-03-03
這篇文章主要給大家介紹了關于iOS圖片壓縮、濾鏡、剪切及渲染等的相關資料，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2019-01-01
這篇文章主要給大家介紹了關于iOS系統的底層通知框架庫的相關資料，文中通過示例代碼介紹的非常詳細，對各位iOS開發者們具有一定的參考學習價值，需要的朋友們下面來一起學習學習吧2019-05-05
這篇文章主要給大家介紹了關于iOS中多網絡請求的線程安全的相關資料文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧。2017-10-10
本篇文章主要介紹了Xcode9 和iOS11適配和特性，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2017-09-09
本篇文章主要介紹了iOS實現翻頁效果動畫實例代碼，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2017-05-05
這篇文章主要為大家詳細介紹了iOS實現拼圖小游戲，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2022-03-03
這篇文章主要為大家詳細介紹了iOS搭建簡易購物車頁面，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2022-08-08
這篇文章主要介紹了IOS 上架后出現90034代碼錯誤問題解決的相關資料,需要的朋友可以參考下2016-11-11
這篇文章主要介紹了Unity iOS混合開發界面切換思路解析的相關資料,非常不錯，具有參考借鑒價值，需要的朋友可以參考下2016-09-09