iOS實現抽屜效果
更新時間:2020年02月22日 07:43:00 作者:LayneCheung
這篇文章主要為大家詳細介紹了iOS實現抽屜效果,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下
本文實例為大家分享了iOS實現抽屜效果的具體代碼,供大家參考,具體內容如下
抽屜效果:

#import "DragerViewController.h"
#define screenW [UIScreen mainScreen].bounds.size.width
@interface DragerViewController ()
@property (nonatomic, weak) UIView *leftV;
@property (nonatomic, weak) UIView *rightV;
@property (nonatomic, weak) UIView *mainV;
@end
@implementation DragerViewController
- (void)viewDidLoad {
[super viewDidLoad];
//添加子控件
[self setUp];
//添加手勢
UIPanGestureRecognizer *pan = [[UIPanGestureRecognizer alloc] initWithTarget:self action:@selector(pan:)];
[self.mainV addGestureRecognizer:pan];
//給控制器的View添加點按手勢
UITapGestureRecognizer *tap = [[UITapGestureRecognizer alloc] initWithTarget:self action:@selector(tap)];
[self.view addGestureRecognizer:tap];
}
- (void)tap{
//讓MainV復位
[UIView animateWithDuration:0.5 animations:^{
self.mainV.frame = self.view.bounds;
}];
}
#define targetR 275
#define targetL -275
- (void)pan:(UIPanGestureRecognizer *)pan{
//獲取偏移量
CGPoint transP = [pan translationInView:self.mainV];
//為什么不使用transform,是因為我們還要去修改高度,使用transform,只能修改,x,y
//self.mainV.transform = CGAffineTransformTranslate(self.mainV.transform, transP.x, 0);
self.mainV.frame = [self frameWithOffsetX:transP.x];
//判斷拖動的方向
if(self.mainV.frame.origin.x > 0){
//向右
self.rightV.hidden = YES;
}else if(self.mainV.frame.origin.x < 0){
//向左
self.rightV.hidden = NO;
}
//當手指松開時,做自動定位.
CGFloat target = 0;
if (pan.state == UIGestureRecognizerStateEnded) {
if (self.mainV.frame.origin.x > screenW * 0.5 ) {
//1判斷在右側
//當前View的x有沒有大于屏幕寬度的一半,大于就是在右側
target = targetR;
}else if(CGRectGetMaxX(self.mainV.frame) < screenW * 0.5){
//2.判斷在左側
//當前View的最大的x有沒有小于屏幕寬度的一半,小于就是在左側
target = targetL;
}
//計算當前mainV的frame.
CGFloat offset = target - self.mainV.frame.origin.x;
[UIView animateWithDuration:0.5 animations:^{
self.mainV.frame = [self frameWithOffsetX:offset];
}];
}
//復位
[pan setTranslation:CGPointZero inView:self.mainV];
}
#define maxY 100
//根據偏移量計算MainV的frame
- (CGRect)frameWithOffsetX:(CGFloat)offsetX {
NSLog(@"offsetX===%f",offsetX);
CGRect frame = self.mainV.frame;
NSLog(@"x====%f",frame.origin.x);
frame.origin.x += offsetX;
//當拖動的View的x值等于屏幕寬度時,maxY為最大,最大為100
// 375 * 100 / 375 = 100
//對計算的結果取絕對值
CGFloat y = fabs( frame.origin.x * maxY / screenW);
frame.origin.y = y;
//屏幕的高度減去兩倍的Y值
frame.size.height = [UIScreen mainScreen].bounds.size.height - (2 * frame.origin.y);
return frame;
}
- (void)setUp{
//leftV
UIView *leftV = [[UIView alloc] initWithFrame:self.view.bounds];
leftV.backgroundColor = [UIColor blueColor];
self.leftV = leftV;
[self.view addSubview:leftV];
//rightV
UIView *rightV = [[UIView alloc] initWithFrame:self.view.bounds];
rightV.backgroundColor = [UIColor greenColor];
self.rightV = rightV;
[self.view addSubview:rightV];
//mianV
UIView *mainV = [[UIView alloc] initWithFrame:self.view.bounds];
mainV.backgroundColor = [UIColor redColor];
self.mainV = mainV;
[self.view addSubview:mainV];
}
@end
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
相關文章
IOS 開發之對象為空的判斷(nil、null)詳解
這篇文章主要介紹了IOS 開發之對象為空的判斷(nil、null)詳解的相關資料,需要的朋友可以參考下2017-02-02
iOS使用GCDSocketManager實現長連接的方法
下面想就為大家分享一篇iOS使用GCDSocketManager實現長連接的方法,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2017-12-12
IOS collectionViewCell防止復用的兩種方法
這篇文章主要介紹了IOS collectionViewCell防止復用的兩種方法的相關資料,需要的朋友可以參考下2016-11-11
iOS schem與Universal Link 調試時踩坑解決記錄
這篇文章主要為大家介紹了iOS schem與Universal Link 調試時踩坑解決記錄,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-01-01

