Python獲取對象屬性的幾種方式小結
本文將簡單介紹四種獲取對象的方法。
假如有以下的類:
class Person(object): def __init__(self, name, age): self.name = name self.age = age def __str__(self): return 'name=%s, age=%s' % (self.name, self.age)
方法一:使用屬性運算符
print(xmr.name)
方法二:通過屬性字典__dict__
print(xmr.__dict__['name'])
方法三:通過getattr函數
print(getattr(xmr, 'name'))
方法四:operator.attrgetter
import operator
op = operator.attrgetter('name')
print(op(xmr))
方法四可以用于對象的排序,比如需要根據年齡age來排序Person對象:
import operator
p_list = [Person('xiemanR', 18), Person('zhangshan', 17), Person('lisi', 20), Person('wangwu', 25)]
r = sorted(p_list, key=operator.attrgetter('age'))
for i in r:
print(i)
輸出結果:
Person(name=zhangshan, age=17) Person(name=xiemanR, age=18) Person(name=lisi, age=20) Person(name=wangwu, age=25)
PS:其實第四種方法是調用第三種方法的,只是簡單封裝了一下,我們看看operator.attrgetter實現就知道了:
class attrgetter:
def __init__(self, attr, *attrs):
if not attrs:
if not isinstance(attr, str):
raise TypeError('attribute name must be a string')
names = attr.split('.')
def func(obj):
for name in names:
obj = getattr(obj, name)
return obj
self._call = func
else:
getters = tuple(map(attrgetter, (attr,) + attrs))
def func(obj):
return tuple(getter(obj) for getter in getters)
self._call = func
def __call__(self, obj):
return self._call(obj)
完。
補充知識:深入理解python對象及屬性
類屬性和實例屬性
首先來看看類屬性和類實例的屬性在python中如何存儲,通過__dir__方法來查看對象的屬性
>>> class Test(object):
pass
>>> test = Test()
# 查看類屬性
>>> dir(Test)
['__class__','__delattr__','__dict__','__doc__','__format__',
'__getattribute__', '__hash__', '__init__', '__module__',
'__new__', '__reduce__', '__reduce_ex__', '__repr__',
'__setattr__', '__sizeof__', '__str__', '__subclasshook__',
'__weakref__']
# 查看實例屬性
>>> dir(test)
['__class__', '__delattr__', '__dict__', '__doc__', '__format__',
'__getattribute__', '__hash__', '__init__', '__module__',
'__new__', '__reduce__', '__reduce_ex__', '__repr__',
'__setattr__', '__sizeof__', '__str__', '__subclasshook__',
'__weakref__']
我們主要看一個屬性__dict__,因?yàn)?__dict__保存的對象的屬性,看下面一個例子
>>> class Spring(object):
... season = "the spring of class"
...
# 查看Spring類保存的屬性
>>> Spring.__dict__
dict_proxy({'__dict__': <attribute '__dict__' of 'Spring' objects>,
'season': 'the spring of class',
'__module__': '__main__',
'__weakref__': <attribute '__weakref__' of 'Spring' objects>,
'__doc__': None})
# 通過兩種方法訪問類屬性
>>> Spring.__dict__['season']
'the spring of class'
>>> Spring.season
'the spring of class'
發現__dict__有個'season'鍵,這就是這個類的屬性,其值就是類屬性的數據.
接來看,看看它的實例屬性
>>> s = Spring()
# 實例屬性的__dict__是空的
>>> s.__dict__
{}
# 其實是指向的類屬性
>>> s.season
'the spring of class'
# 建立實例屬性
>>> s.season = "the spring of instance"
# 這樣,實例屬性里面就不空了。這時候建立的實例屬性和類屬性重名,并且把它覆蓋了
>>> s.__dict__
{'season': 'the spring of instance'}
>>> s.__dict__['season']
'the spring of instance'
>>> s.season
'the spring of instance'
# 類屬性沒有受到實例屬性的影響
>>> Spring.__dict__['season']
'the spring of class'
>>> Spring.__dict__
dict_proxy({'__dict__': <attribute '__dict__' of 'Spring' objects>, 'season': 'the spring of class', '__module__': '__main__', '__weakref__': <attribute '__weakref__' of 'Spring' objects>, '__doc__': None})
# 如果將實例屬性刪除,又會調用類屬性
>>> del s.season
>>> s.__dict__
{}
>>> s.season
'the spring of class'
# 自定義實例屬性,對類屬性沒有影響
>>> s.lang = "python"
>>> s.__dict__
{'lang': 'python'}
>>> s.__dict__['lang']
'python'
# 修改類屬性
>>> Spring.flower = "peach"
>>> Spring.__dict__
dict_proxy({'__module__': '__main__',
'flower': 'peach',
'season': 'the spring of class',
'__dict__': <attribute '__dict__' of 'Spring' objects>, '__weakref__': <attribute '__weakref__' of 'Spring' objects>, '__doc__': None})
>>> Spring.__dict__['flower']
'peach'
# 實例中的__dict__并沒有變化
>>> s.__dict__
{'lang': 'python'}
# 實例中找不到flower屬性,調用類屬性
>>> s.flower
'peach'
下面看看類中包含方法,__dict__如何發生變化
# 定義類
>>> class Spring(object):
... def tree(self, x):
... self.x = x
... return self.x
...
# 方法tree在__dict__里面
>>> Spring.__dict__
dict_proxy({'__dict__': <attribute '__dict__' of 'Spring' objects>,
'__weakref__': <attribute '__weakref__' of 'Spring' objects>,
'__module__': '__main__',
'tree': <function tree at 0xb748fdf4>,
'__doc__': None})
>>> Spring.__dict__['tree']
<function tree at 0xb748fdf4>
# 建立實例,但是__dict__中沒有方法
>>> t = Spring()
>>> t.__dict__
{}
# 執行方法
>>> t.tree("xiangzhangshu")
'xiangzhangshu'
# 實例方法(t.tree('xiangzhangshu'))的第一個參數(self,但沒有寫出來)綁定實例 t,透過 self.x 來設定值,即給 t.__dict__添加屬性值。
>>> t.__dict__
{'x': 'xiangzhangshu'}
# 如果沒有將x 賦值給 self 的屬性,而是直接 return,結果發生了變化
>>> class Spring(object):
... def tree(self, x):
... return x
>>> s = Spring()
>>> s.tree("liushu")
'liushu'
>>> s.__dict__
{}
需要理解python中的一個觀點,一切都是對象,不管是類還是實例,都可以看成是對象,符合object.attribute ,都會有自己的屬性
使用__slots__優化內存使用
默認情況下,python在各個實例中為名為_(kāi)_dict__的字典里存儲實例屬性,而字典會消耗大量?jī)?nèi)存(字典要使用底層散列表提升訪問速度), 通過__slots__類屬性,在元組中存儲實例屬性,不用字典,從而節省大量?jī)?nèi)存
# 在類中定義__slots__屬性就是說這個類中所有實例的屬性都在這兒了,如果幾百萬個實例同時活動,能節省大量?jī)?nèi)存
>>> class Spring(object):
... __slots__ = ("tree", "flower")
...
# 仔細看看 dir() 的結果,還有__dict__屬性嗎?沒有了,的確沒有了。也就是說__slots__把__dict__擠出去了,它進入了類的屬性。
>>> dir(Spring)
['__class__', '__delattr__', '__doc__', '__format__', '__getattribute__', '__hash__', '__init__', '__module__', '__new__', '__reduce__', '__reduce_ex__', '__repr__', '__setattr__', '__sizeof__', '__slots__', '__str__', '__subclasshook__', 'flower', 'tree']
>>> Spring.__slots__
('tree', 'flower')
# 實例化
>>> t = Spring()
>>> t.__slots__
('tree', 'flower')
# 通過類賦予屬性值
>>> Spring.tree = "liushu"
# tree這個屬性是只讀的, 實例不能修改
>>> t.tree = "guangyulan"
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
AttributeError: 'Spring' object attribute 'tree' is read-only
>>> t.tree
'liushu'
# 對于用類屬性賦值的屬性,只能用來修改
>>> Spring.tree = "guangyulan"
>>> t.tree
'guangyulan'
# 對于沒有用類屬性賦值的屬性,可以通過實例來修改
>>> t.flower = "haitanghua"
>>> t.flower
'haitanghua'
# 實例屬性的值并沒有傳回到類屬性,你也可以理解為新建立了一個同名的實例屬性
>>> Spring.flower
<member 'flower' of 'Spring' objects>
# 如果再給類屬性賦值
>>> Spring.flower = "ziteng"
>>> t.flower
'ziteng'
如果使用的當,__slots__可以顯著節省內存,按需要注意一下問題
在類中定義__slots__之后,實例不能再有__slots__所列名稱之外的其他屬性
每個子類都要定義__slots__熟悉,因?yàn)榻忉屍鲿?huì)忽略繼承__slots__屬性
如果不把__werkref__加入__slots__,實例不能作為弱引用的目標
屬性的魔術方法
來看幾個魔術方法
__setattr__(self,name,value):如果要給 name 賦值,就調用這個方法。 __getattr__(self,name):如果 name 被訪問,同時它不存在的時候,此方法被調用。 __getattribute__(self,name):當 name被訪問時自動被調用(注意:這個僅能用于新式類),無論 name 是否存在,都要被調用。 __delattr__(self,name):如果要?jiǎng)h除 name,這個方法就被調用。 >>> class A(object): ... def __getattr__(self, name): ... print "You use getattr" ... def __setattr__(self, name, value): ... print "You use setattr" ... self.__dict__[name] = value # a.x,按照本節開頭的例子,是要報錯的。但是,由于在這里使用了__getattr__(self, name) 方法,當發現 x 不存在于對象的__dict__中的時候,就調用了__getattr__,即所謂“攔截成員”。 >>> a = A() >>> a.x You use getattr # 給對象的屬性賦值時候,調用了__setattr__(self, name, value)方法,這個方法中有一句 self.__dict__[name] = value,通過這個語句,就將屬性和數據保存到了對象的__dict__中 >>> a.x = 7 You use setattr # 測試__getattribute__(self,name) >>> class B(object): ... def __getattribute__(self, name): ... print "you are useing getattribute" ... return object.__getattribute__(self, name) # 返回的內容用的是 return object.__getattribute__(self, name),而沒有使用 return self.__dict__[name]。因?yàn)槿绻眠@樣的方式,就是訪問 self.__dict__,只要訪問這個屬性,就要調用`getattribute``,這樣就導致了無限遞歸 # 訪問不存在的成員,可以看到,已經被__getattribute__攔截了,雖然最后還是要報錯的。 >>> b = B() >>> b.y you are useing getattribute Traceback (most recent call last): File "<stdin>", line 1, in <module> File "<stdin>", line 4, in __getattribute__ AttributeError: 'B' object has no attribute 'y'
Property函數
porperty可以作為裝飾器使用把方法標記為特性
class Vector(object):
def __init__(self, x, y):
# 使用兩個前導下劃線,把屬性標記為私有
self.__x = float(x)
self.__y = float(y)
# porperty裝飾器把讀值方法標記為特性
@property
def x(self):
return self.__x
@property
def y(self):
return self.__y
vector = Vector(3,4)
print(vector.x, vector.y)
使用property可以將函數封裝為屬性
class Rectangle(object):
"""
the width and length of Rectangle
"""
def __init__(self):
self.width = 0
self.length = 0
def setSize(self, size):
self.width, self.length = size
def getSize(self):
return self.width, self.length
if __name__ == "__main__":
r = Rectangle()
r.width = 3
r.length = 4
print r.getSize() # (3,4)
r.setSize( (30, 40) )
print r.width # 30
print r.length # 40
這段代碼可以正常運行,但是屬性的調用方式可以改進,如下:
class Rectangle(object):
"""
the width and length of Rectangle
"""
def __init__(self):
self.width = 0
self.length = 0
def setSize(self, size):
self.width, self.length = size
def getSize(self):
return self.width, self.length
# 使用property方法將函數封裝為屬性,更優雅
size = property(getSize, setSize)
if __name__ == "__main__":
r = Rectangle()
r.width = 3
r.length = 4
print r.size # (30, 40)
r.size = 30, 40
print r.width # 30
print r.length # 40
使用魔術方法實現:
class NewRectangle(object):
def __init__(self):
self.width = 0
self.length = 0
def __setattr__(self, name, value):
if name == 'size':
self.width, self, length = value
else:
self.__dict__[name] = value
def __getattr__(self, name):
if name == 'size':
return self.width, self.length
else:
raise AttrubuteErrir
if __name__ == "__main__":
r = Rectangle()
r.width = 3
r.length = 4
print r.size # (30, 40)
r.size = 30, 40
print r.width # 30
print r.length # 40
屬性的獲取順序
最后我們來看看熟悉的獲得順序:通過實例獲取其屬性,如果在__dict__中有相應的屬性,就直接返回其結果;如果沒有,會到類屬性中找。
看下面一個例子:
class A(object):
author = "qiwsir"
def __getattr__(self, name):
if name != "author":
return "from starter to master."
if __name__ == "__main__":
a = A()
print a.author # qiwsir
print a.lang # from starter to master.
當 a = A() 后,并沒有為實例建立任何屬性,或者說實例的__dict__是空的。但是如果要查看 a.author,因?yàn)閷?shí)例的屬性中沒有,所以就去類屬性中找,發現果然有,于是返回其值 “qiwsir”。但是,在找 a.lang的時候,不僅實例屬性中沒有,類屬性中也沒有,于是就調用了__getattr__()方法。在上面的類中,有這個方法,如果沒有__getattr__()方法呢?如果沒有定義這個方法,就會引發 AttributeError,這在前面已經看到了。
以上這篇Python獲取對象屬性的幾種方式小結就是小編分享給大家的全部?jī)?nèi)容了,希望能給大家一個參考,也希望大家多多支持腳本之家。
相關文章
Python實現的序列化和反序列化二叉樹算法示例
這篇文章主要介紹了Python實現的序列化和反序列化二叉樹算法,結合實例形式分析了Python二叉樹的構造、遍歷、序列化、反序列化等相關操作技巧,需要的朋友可以參考下2019-03-03
python中利用numpy.array()實現倆個數值列表的對應相加方法
今天小編就為大家分享一篇python中利用numpy.array()實現倆個數值列表的對應相加方法,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2019-08-08
Python列表之間的數字與字符轉化實例
在python列表操作中,面對需要把列表中的字符串轉為禮拜的操作,無需強轉,通過簡單的幾步就可以實現,下面這篇文章主要給大家介紹了關于Python列表之間的數字與字符轉化的相關資料,需要的朋友可以參考下2023-02-02
Python實現為PDF大文件批量去除水印
在閱讀過程中如果遇到一些帶有水印的資料是比較煩心的,而市面上去水印的功能有多要收費且很不方便,那么,如何通過Python來對這類圖片水印進行去除呢,本文就來和大家分享一下實現方法吧2023-05-05

