完美解決TensorFlow和Keras大數據量?jī)?nèi)存溢出的問題
內存溢出問題是參加kaggle比賽或者做大數據量實驗的第一個攔路虎。
以前做的練手小項目導致新手產生一個慣性思維——讀取訓練集圖片的時候把所有圖讀到內存中,然后分批訓練。
其實這是有問題的,很容易導致OOM?,F(xiàn)在內存一般16G,而訓練集圖片通常是上萬張,而且RGB圖,還很大,VGG16的圖片一般是224x224x3,上萬張圖片,16G內存根本不夠用。這時候又會想起——設置batch,但是那個batch的輸入?yún)?shù)卻又是圖片,它只是把傳進去的圖片分批送到顯卡,而我OOM的地方恰是那個“傳進去”的圖片,怎么辦?
解決思路其實說來也簡單,打破思維定式就好了,不是把所有圖片讀到內存中,而是只把所有圖片的路徑一次性讀到內存中。
大致的解決思路為:
將上萬張圖片的路徑一次性讀到內存中,自己實現一個分批讀取函數,在該函數中根據自己的內存情況設置讀取圖片,只把這一批圖片讀入內存中,然后交給模型,模型再對這一批圖片進行分批訓練,因?yàn)閮?nèi)存一般大于等于顯存,所以內存的批次大小和顯存的批次大小通常不相同。
下面代碼分別介紹Tensorflow和Keras分批將數據讀到內存中的關鍵函數。Tensorflow對初學者不太友好,所以我個人現階段更習慣用它的高層API Keras來做相關項目,下面的TF實現是之前不會用Keras分批讀時候參考的一些列資料,在模型訓練上仍使用Keras,只有分批讀取用了TF的API。
Tensorlow
在input.py里寫get_batch函數。
def get_batch(X_train, y_train, img_w, img_h, color_type, batch_size, capacity):
'''
Args:
X_train: train img path list
y_train: train labels list
img_w: image width
img_h: image height
batch_size: batch size
capacity: the maximum elements in queue
Returns:
X_train_batch: 4D tensor [batch_size, width, height, chanel],\
dtype=tf.float32
y_train_batch: 1D tensor [batch_size], dtype=int32
'''
X_train = tf.cast(X_train, tf.string)
y_train = tf.cast(y_train, tf.int32)
# make an input queue
input_queue = tf.train.slice_input_producer([X_train, y_train])
y_train = input_queue[1]
X_train_contents = tf.read_file(input_queue[0])
X_train = tf.image.decode_jpeg(X_train_contents, channels=color_type)
X_train = tf.image.resize_images(X_train, [img_h, img_w],
tf.image.ResizeMethod.NEAREST_NEIGHBOR)
X_train_batch, y_train_batch = tf.train.batch([X_train, y_train],
batch_size=batch_size,
num_threads=64,
capacity=capacity)
y_train_batch = tf.one_hot(y_train_batch, 10)
return X_train_batch, y_train_batch
在train.py文件中訓練(下面不是純TF代碼,model.fit是Keras的擬合,用純TF的替換就好了)。
X_train_batch, y_train_batch = inp.get_batch(X_train, y_train,
img_w, img_h, color_type,
train_batch_size, capacity)
X_valid_batch, y_valid_batch = inp.get_batch(X_valid, y_valid,
img_w, img_h, color_type,
valid_batch_size, capacity)
with tf.Session() as sess:
coord = tf.train.Coordinator()
threads = tf.train.start_queue_runners(coord=coord)
try:
for step in np.arange(max_step):
if coord.should_stop() :
break
X_train, y_train = sess.run([X_train_batch,
y_train_batch])
X_valid, y_valid = sess.run([X_valid_batch,
y_valid_batch])
ckpt_path = 'log/weights-{val_loss:.4f}.hdf5'
ckpt = tf.keras.callbacks.ModelCheckpoint(ckpt_path,
monitor='val_loss',
verbose=1,
save_best_only=True,
mode='min')
model.fit(X_train, y_train, batch_size=64,
epochs=50, verbose=1,
validation_data=(X_valid, y_valid),
callbacks=[ckpt])
del X_train, y_train, X_valid, y_valid
except tf.errors.OutOfRangeError:
print('done!')
finally:
coord.request_stop()
coord.join(threads)
sess.close()
Keras
keras文檔中對fit、predict、evaluate這些函數都有一個generator,這個generator就是解決分批問題的。
關鍵函數:fit_generator
# 讀取圖片函數
def get_im_cv2(paths, img_rows, img_cols, color_type=1, normalize=True):
'''
參數:
paths:要讀取的圖片路徑列表
img_rows:圖片行
img_cols:圖片列
color_type:圖片顏色通道
返回:
imgs: 圖片數組
'''
# Load as grayscale
imgs = []
for path in paths:
if color_type == 1:
img = cv2.imread(path, 0)
elif color_type == 3:
img = cv2.imread(path)
# Reduce size
resized = cv2.resize(img, (img_cols, img_rows))
if normalize:
resized = resized.astype('float32')
resized /= 127.5
resized -= 1.
imgs.append(resized)
return np.array(imgs).reshape(len(paths), img_rows, img_cols, color_type)
獲取批次函數,其實就是一個generator
def get_train_batch(X_train, y_train, batch_size, img_w, img_h, color_type, is_argumentation):
'''
參數:
X_train:所有圖片路徑列表
y_train: 所有圖片對應的標簽列表
batch_size:批次
img_w:圖片寬
img_h:圖片高
color_type:圖片類型
is_argumentation:是否需要數據增強
返回:
一個generator,x: 獲取的批次圖片 y: 獲取的圖片對應的標簽
'''
while 1:
for i in range(0, len(X_train), batch_size):
x = get_im_cv2(X_train[i:i+batch_size], img_w, img_h, color_type)
y = y_train[i:i+batch_size]
if is_argumentation:
# 數據增強
x, y = img_augmentation(x, y)
# 最重要的就是這個yield,它代表返回,返回以后循環還是會繼續,然后再返回。就比如有一個機器一直在作累加運算,但是會把每次累加中間結果告訴你一樣,直到把所有數加完
yield({'input': x}, {'output': y})
訓練函數
result = model.fit_generator(generator=get_train_batch(X_train, y_train, train_batch_size, img_w, img_h, color_type, True),
steps_per_epoch=1351,
epochs=50, verbose=1,
validation_data=get_train_batch(X_valid, y_valid, valid_batch_size,img_w, img_h, color_type, False),
validation_steps=52,
callbacks=[ckpt, early_stop],
max_queue_size=capacity,
workers=1)
就是這么簡單。但是當初從0到1的過程很難熬,每天都沒有進展,沒有頭緒,急躁占據了思維的大部,熬過了這個階段,就會一切順利,不是運氣,而是踩過的從0到1的每個腳印累積的靈感的爆發,從0到1的腳印越多,后面的路越順利。
以上這篇完美解決TensorFlow和Keras大數據量?jī)?nèi)存溢出的問題就是小編分享給大家的全部?jī)?nèi)容了,希望能給大家一個參考,也希望大家多多支持腳本之家。
相關文章
Flask項目搭建配置項導入教程
這篇文章主要為大家介紹了Flask項目搭建配置項導入教程,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-11-11
淺談django的render函數的參數問題
今天小編就為大家分享一篇淺談django的render函數的參數問題,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2018-10-10
Python Selenium 之?dāng)?shù)據驅動測試的實現
這篇文章主要介紹了Python Selenium 之?dāng)?shù)據驅動測試的實現,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2019-08-08
python skimage 連通性區域檢測方法
今天小編就為大家分享一篇python skimage 連通性區域檢測方法,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2018-06-06
Python?內置函數sorted()的用法
這篇文章主要介紹了Python?內置函數sorted()的用法,文章內容介紹詳細具有一的參考價值,需要的小伙伴可以參考一下,希望對你的學習有所幫助2022-03-03
python實現不同電腦之間視頻傳輸功能
這篇文章主要介紹了python實現不同電腦之間視頻傳輸,本文視頻傳輸實現的前提是確保發送端和接收端接在同一個局域網下,分為發送端和接收端,通過實例代碼給大家介紹的非常詳細,需要的朋友參考下吧2021-06-06
python保留若干位小數?format與round的使用區別
這篇文章主要介紹了python保留若干位小數?format與round的使用區別,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2023-08-08

