快捷導航

PyQt5實現界面(頁面)跳轉的示例代碼

更新時間：2021年04月07日 10:32:13 作者：Awzh

這篇文章主要介紹了PyQt5實現界面跳轉的示例代碼，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧

網上關于PyQt5的教程很少，特別是界面跳轉這一塊兒，自己研究了半天，下來和大家分享一下

一、首先是主界面

# -*- coding: utf-8 -*-

# Form implementation generated from reading ui file 'Form.ui'
#
# Created by: PyQt5 UI code generator 5.10.1
#
# WARNING! All changes made in this file will be lost!
#要注意的是跳轉界面第二個必須使用QDialog類，不能使用QWidget，我也不知道為什么，特別注意
from PyQt5 import QtCore, QtGui, QtWidgets
from PyQt5.QtWidgets import QMainWindow, QApplication
import Dialog1
import Dialog2
import sys


class Ui_Form(object): #這是用PyQt Designer生成的代碼，很簡單的，拖動控件，生成ui文件，然后UIC轉換成py文件
  def setupUi(self, Form):
    Form.setObjectName("Form")
    Form.resize(440, 310)
    self.form = Form
    self.btn_d1 = QtWidgets.QPushButton(Form)
    self.btn_d1.setGeometry(QtCore.QRect(60, 140, 75, 23))
    self.btn_d1.setObjectName("btn_d1")
    self.btn_d2 = QtWidgets.QPushButton(Form)
    self.btn_d2.setGeometry(QtCore.QRect(180, 140, 75, 23))
    self.btn_d2.setObjectName("btn_d2")
    self.btn_exit = QtWidgets.QPushButton(Form)
    self.btn_exit.setGeometry(QtCore.QRect(310, 140, 75, 23))
    self.btn_exit.setObjectName("btn_exit")

    self.retranslateUi(Form)
    QtCore.QMetaObject.connectSlotsByName(Form)

  def retranslateUi(self, Form):
    _translate = QtCore.QCoreApplication.translate
    Form.setWindowTitle(_translate("Form", "Form"))
    self.btn_d1.setText(_translate("Form", "Demo1"))
    self.btn_d1.clicked.connect(self.jump_to_demo1)
    self.btn_d2.setText(_translate("Form", "Demo2"))
    self.btn_d2.clicked.connect(self.jump_to_demo2)
    self.btn_exit.setText(_translate("Form", "Exit"))
    self.btn_exit.clicked.connect(self.exit)

  def jump_to_demo1(self):    #這一塊注意，是重點從主界面跳轉到Demo1界面，主界面隱藏，如果關閉Demo界面，主界面進程會觸發self.form.show()會再次顯示主界面
    self.form.hide()      #如果沒有self.form.show()這一句，關閉Demo1界面后就會關閉程序
    form1 = QtWidgets.QDialog()
    ui = Dialog1.Ui_Dialog1()
    ui.setupUi(form1)
    form1.show()
    form1.exec_()
    self.form.show()

  def jump_to_demo2(self):
    self.form.hide()
    form2 = QtWidgets.QDialog()
    ui = Dialog2.Ui_Dialog2()
    ui.setupUi(form2)
    form2.show()
    form2.exec_()
    self.form.show()

  def exit(self):
    self.form.close()


if __name__ == "__main__":
  app = QApplication(sys.argv)
  form = QtWidgets.QWidget()
  window = Ui_Form()
  window.setupUi(form)
  form.show()
  sys.exit(app.exec_())

二、跳轉界面Demo1

# -*- coding: utf-8 -*-

# Form implementation generated from reading ui file 'Dialog1.ui'
#
# Created by: PyQt5 UI code generator 5.10.1
#
# WARNING! All changes made in this file will be lost!

from PyQt5 import QtCore, QtGui, QtWidgets

class Ui_Dialog1(object):
  def setupUi(self, Dialog1):
    Dialog1.setObjectName("Dialog1")
    Dialog1.resize(400, 300)
    self.dialog=Dialog1
    self.pushButton = QtWidgets.QPushButton(Dialog1)
    self.pushButton.setGeometry(QtCore.QRect(140, 140, 75, 23))
    self.pushButton.setObjectName("pushButton")

    self.retranslateUi(Dialog1)
    QtCore.QMetaObject.connectSlotsByName(Dialog1)

  def retranslateUi(self, Dialog1):
    _translate = QtCore.QCoreApplication.translate
    Dialog1.setWindowTitle(_translate("Dialog1", "Dialog"))
    self.pushButton.setText(_translate("Dialog1", "Jump to main"))
    self.pushButton.clicked.connect(self.jump_to_main)

  def jump_to_main(self):
    self.dialog.close()

三、跳轉界面Demo2

# -*- coding: utf-8 -*-

# Form implementation generated from reading ui file 'Dialog2.ui'
#
# Created by: PyQt5 UI code generator 5.10.1
#
# WARNING! All changes made in this file will be lost!

from PyQt5 import QtCore, QtGui, QtWidgets
from PyQt5.QtWidgets import QMainWindow, QDialog, QApplication
import sys


class Ui_Dialog2(object):
  def setupUi(self, Dialog2):
    Dialog2.setObjectName("Dialog2")
    Dialog2.resize(400, 300)
    self.dialog = Dialog2
    self.pushButton = QtWidgets.QPushButton(Dialog2)
    self.pushButton.setGeometry(QtCore.QRect(140, 160, 75, 23))
    self.pushButton.setObjectName("pushButton")

    self.retranslateUi(Dialog2)
    QtCore.QMetaObject.connectSlotsByName(Dialog2)

  def retranslateUi(self, Dialog2):
    _translate = QtCore.QCoreApplication.translate
    Dialog2.setWindowTitle(_translate("Dialog2", "Dialog"))
    self.pushButton.setText(_translate("Dialog2", "Jump to main"))
    self.pushButton.clicked.connect(self.go_main)

  def go_main(self):
    self.dialog.close()

if __name__ == "__main__":
  app = QApplication(sys.argv)
  form = QtWidgets.QDialog()
  ui = Ui_Dialog2()
  ui.setupUi(form)
  form.show()
  sys.exit(app.exec_())

到此這篇關于PyQt5實現界面跳轉的示例代碼的文章就介紹到這了,更多相關PyQt5 界面跳轉內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: