Python趣味挑戰之用pygame實現飛機塔防游戲
更新時間：2021年05月28日 10:13:33 作者：dhjabc_1
一步步實現有趣的飛機塔防游戲,有興趣了解一下嗎？文中有非常詳細的代碼示例,對喜歡玩游戲的小伙伴們很有幫助哦,需要的朋友可以參考下
一、先讓飛機在屏幕上飛起來吧。
（一）實現飛機類
class Plane:
def __init__(self,filename,screen):
self.plane = pygame.image.load(filename).convert_alpha()
self.height = self.plane.get_height()
self.width = self.plane.get_width()
self.radius = randint(2, 10)
self.xpos = randint(self.radius, 800-self.radius)
self.ypos = randint(self.radius, 700-self.radius)
# self.xpos = randint(100, 600)
# self.ypos = randint(100, 600)
self.xvelocity = randint(2, 6)/5
self.yvelocity = randint(2, 6)/5
self.angle = math.atan2(self.yvelocity,self.xvelocity)
self.fangle = math.degrees(self.angle)+90
self.screen = screen
self.scrnwidth = 800
self.scrnheight = 700
def move_ball(self):
self.xpos += self.xvelocity
self.ypos += self.yvelocity
# 如果球的y坐標大于等于屏幕高度和球的半徑的差，則調整球的運行y軸方向朝上
if self.ypos >= self.scrnheight-self.width:
self.yvelocity = -self.yvelocity
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
# 如果球的y坐標小于等于屏幕高度和球的半徑的差，則調整球的y軸運行方向朝下
if self.ypos <= 0:
self.yvelocity = abs(self.yvelocity)
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
# 如果球的x坐標大于等于屏幕寬度和球的半徑差，則調整球的運行x軸方向朝左
if self.xpos >= self.scrnwidth-self.height:
self.xvelocity = -self.xvelocity
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
# 如果球的x坐標小于等于屏幕寬度和球半徑的差，則調整球的運行x軸方向朝右
if self.xpos <= 0:
self.xvelocity = abs(self.xvelocity)
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
self.planed = pygame.transform.rotate(self.plane, -(self.fangle))
self.screen.blit(self.planed, (self.xpos,self.ypos))
（二）讓飛機飛起來
if __name__ == '__main__':
pygame.init()
screen = pygame.display.set_mode((800, 700))
plane = Plane('plane.png',screen)
clock = pygame.time.Clock()
while True:
for event in pygame.event.get():
if event.type == pygame.QUIT:
pygame.quit()
sys.exit()
clock.tick(200)
screen.fill((0, 0, 0))
plane.move_ball()
pygame.display.update()
（三）運行效果
二、屏幕下發實現一個塔防設備
（一）實現塔防設備類
class Pao:
def __init__(self,screen):
self.start = (100,700)
self.end = None
self.screen = screen
self.count = 0
self.bullet_list = []
pass
def getpos(self,pos2,r):
self.angle = math.atan2( pos2[1]-self.start[1],pos2[0]-self.start[0])
self.fangle = math.degrees(self.angle)
self.x = self.start[0]+r*math.cos(self.angle)
self.y = self.start[1]+r*math.sin(self.angle)
self.r = r
self.end = pos2
def move(self):
pygame.draw.line(self.screen, (255, 0, 0), self.start, (self.x,self.y), 5)
pygame.draw.circle(self.screen,(0,255,0),self.start,15)
（二）主函數實現調用
pao = Pao(screen)
clock = pygame.time.Clock()
while True:
for event in pygame.event.get():
if event.type == pygame.QUIT:
pygame.quit()
sys.exit()
clock.tick(200)
screen.fill((0, 0, 0))
plane.move_ball()
pao.getpos((plane.xpos, plane.ypos), 35)
pao.move()
（三）實現效果
發現沒有，塔防設備跟蹤飛機的運動而運動，一切都在監控中。
三、讓子彈也飛起來吧
（一）實現子彈類
class Bullet:
def __init__(self,x,y,fangle,screen,angle):
self.posx = x
self.posy = y
self.fangle = fangle
self.angle = angle
self.alive = True
self.screen = screen
self.bullet = pygame.image.load('bullet2.png').convert_alpha()
self.r = random.randint(5,10)
def move(self):
self.planed = pygame.transform.rotate(self.bullet, -(self.fangle))
self.posx += self.r * math.cos(self.angle)
self.posy += self.r * math.sin(self.angle)
# self.xpos, self.ypos = (self.xpos + section * cosa, self.ypos - section * sina)
if self.posy > 700 or self.posy < 0 or self.posx < 0 or self.posx > 800:
self.alive = False
if self.alive:
self.screen.blit(self.planed, (self.posx, self.posy))
（二）在塔防設備實現子彈生成
在move函數上寫相關代碼
def move(self):
pygame.draw.line(self.screen, (255, 0, 0), self.start, (self.x,self.y), 5)
pygame.draw.circle(self.screen,(0,255,0),self.start,15)
if self.count % 100 == 19:
self.bullet_list.append(Bullet(self.x,self.y,self.fangle,self.screen,self.angle))
self.count += 1
for bullet in self.bullet_list:
if bullet.alive is not True:
del bullet
else:
bullet.move()
（三）完整代碼
import pygame,sys
from math import *
from Ball import Ball
import random
from random import randint
import math
class Plane:
def __init__(self,filename,screen):
self.plane = pygame.image.load(filename).convert_alpha()
self.height = self.plane.get_height()
self.width = self.plane.get_width()
self.radius = randint(2, 10)
self.xpos = randint(self.radius, 800-self.radius)
self.ypos = randint(self.radius, 700-self.radius)
self.xvelocity = randint(2, 6)/5
self.yvelocity = randint(2, 6)/5
self.angle = math.atan2(self.yvelocity,self.xvelocity)
self.fangle = math.degrees(self.angle)+90
self.screen = screen
self.scrnwidth = 800
self.scrnheight = 700
def move_ball(self):
self.xpos += self.xvelocity
self.ypos += self.yvelocity
# 如果球的y坐標大于等于屏幕高度和球的半徑的差，則調整球的運行y軸方向朝上
if self.ypos >= self.scrnheight-self.width:
self.yvelocity = -self.yvelocity
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
# 如果球的y坐標小于等于屏幕高度和球的半徑的差，則調整球的y軸運行方向朝下
if self.ypos <= 0:
self.yvelocity = abs(self.yvelocity)
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
# 如果球的x坐標大于等于屏幕寬度和球的半徑差，則調整球的運行x軸方向朝左
if self.xpos >= self.scrnwidth-self.height:
self.xvelocity = -self.xvelocity
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
# 如果球的x坐標小于等于屏幕寬度和球半徑的差，則調整球的運行x軸方向朝右
if self.xpos <= 0:
self.xvelocity = abs(self.xvelocity)
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
self.planed = pygame.transform.rotate(self.plane, -(self.fangle))
self.newRect = self.plane.get_rect(center=(self.xpos,self.ypos))
self.screen.blit(self.planed,self.newRect)
class Pao:
def __init__(self,screen):
self.start = (100,700)
self.end = None
self.screen = screen
self.count = 0
self.bullet_list = []
pass
def getpos(self,pos2,r):
self.angle = math.atan2( pos2[1]-self.start[1],pos2[0]-self.start[0])
self.fangle = math.degrees(self.angle)
self.x = self.start[0]+r*math.cos(self.angle)
self.y = self.start[1]+r*math.sin(self.angle)
self.r = r
self.end = pos2
def move(self):
pygame.draw.line(self.screen, (255, 0, 0), self.start, (self.x,self.y), 5)
pygame.draw.circle(self.screen,(0,255,0),self.start,15)
if self.count % 100 == 19:
self.bullet_list.append(Bullet(self.x,self.y,self.fangle,self.screen,self.angle))
self.count += 1
for bullet in self.bullet_list:
if bullet.alive is not True:
del bullet
else:
bullet.move()
class Bullet:
def __init__(self,x,y,fangle,screen,angle):
self.posx = x
self.posy = y
self.fangle = fangle
self.angle = angle
self.alive = True
self.screen = screen
self.bullet = pygame.image.load('bullet2.png').convert_alpha()
self.r = random.randint(5,10)
def move(self):
self.planed = pygame.transform.rotate(self.bullet, -(self.fangle))
self.posx += self.r * math.cos(self.angle)
self.posy += self.r * math.sin(self.angle)
# self.xpos, self.ypos = (self.xpos + section * cosa, self.ypos - section * sina)
if self.posy > 700 or self.posy < 0 or self.posx < 0 or self.posx > 800:
self.alive = False
if self.alive:
self.screen.blit(self.planed, (self.posx, self.posy))
if __name__ == '__main__':
pygame.init()
screen = pygame.display.set_mode((800, 700))
plane = Plane('plane.png',screen)
pao = Pao(screen)
clock = pygame.time.Clock()
while True:
for event in pygame.event.get():
if event.type == pygame.QUIT:
pygame.quit()
sys.exit()
clock.tick(200)
screen.fill((0, 0, 0))
plane.move_ball()
pao.getpos((plane.xpos, plane.ypos), 35)
pao.move()
pygame.display.update()
（四）運行效果
四、碰撞監測和爆炸效果實現
（一）碰撞監測
plane_rect = plane.newRect # planed.get_rect()
# print(plane_rect)
# print(len(pao.bullet_list))
for bullet in pao.bullet_list:
# print(bullet.alive)
# print(bullet.planed.get_rect())
if plane_rect.colliderect(bullet.newRect):
bullet.alive = False
plane.reset()
print('1')
（二）爆炸效果
檢測是否碰撞
if plane.alive:
plane.move_ball()
else:
plane.destroy(fCount, screen)
碰撞后的效果
def destroy(self, fCount, winSurface):
self.screen.blit(self.dList[self.dIndex],self.newRect)
if fCount % 3 == 0:
self.dIndex += 1
if self.dIndex == 4:
self.reset()
（三）記錄得分
初始化變量
self.score = 0
展示變量
text1 = self.font.render('score:%s' % self.score, True, (255, 255, 0))
self.screen.blit(text1, (45, 15))
五、完整代碼
import pygame,sys
from math import *
from Ball import Ball
import random
from random import randint
import math
class Plane:
def __init__(self,filename,screen):
self.plane = pygame.image.load(filename).convert_alpha()
self.height = self.plane.get_height()
self.width = self.plane.get_width()
self.alive = True
self.dIndex = 0
self.newRect = None
# 爆炸
self.dSurface1 = pygame.image.load("./images/enemy1_down1.png").convert_alpha()
self.dSurface2 = pygame.image.load("./images/enemy1_down2.png").convert_alpha()
self.dSurface3 = pygame.image.load("./images/enemy1_down3.png").convert_alpha()
self.dSurface4 = pygame.image.load("./images/enemy1_down4.png").convert_alpha()
self.dList = [self.dSurface1, self.dSurface2, self.dSurface3, self.dSurface4]
self.radius = randint(2, 10)
self.xpos = randint(self.radius, 800-self.radius)
self.ypos = randint(self.radius, 700-self.radius)
self.xvelocity = randint(2, 6)/5
self.yvelocity = randint(2, 6)/5
self.angle = math.atan2(self.yvelocity,self.xvelocity)
self.fangle = math.degrees(self.angle)+90
self.screen = screen
self.scrnwidth = 800
self.scrnheight = 700
def destroy(self, fCount, winSurface):
self.screen.blit(self.dList[self.dIndex],self.newRect)
if fCount % 3 == 0:
self.dIndex += 1
if self.dIndex == 4:
self.reset()
def reset(self):
self.radius = randint(2, 10)
self.xpos = randint(self.radius, 800-self.radius)
self.ypos = randint(self.radius, 700-self.radius)
self.xvelocity = randint(2, 6)/5
self.yvelocity = randint(2, 6)/5
self.angle = math.atan2(self.yvelocity,self.xvelocity)
self.fangle = math.degrees(self.angle)+90
self.alive = True
self.dIndex = 0
def move_ball(self):
self.xpos += self.xvelocity
self.ypos += self.yvelocity
# 如果球的y坐標大于等于屏幕高度和球的半徑的差，則調整球的運行y軸方向朝上
if self.ypos >= self.scrnheight-self.width:
self.yvelocity = -self.yvelocity
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
# 如果球的y坐標小于等于屏幕高度和球的半徑的差，則調整球的y軸運行方向朝下
if self.ypos <= 0:
self.yvelocity = abs(self.yvelocity)
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
# 如果球的x坐標大于等于屏幕寬度和球的半徑差，則調整球的運行x軸方向朝左
if self.xpos >= self.scrnwidth-self.height:
self.xvelocity = -self.xvelocity
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
# 如果球的x坐標小于等于屏幕寬度和球半徑的差，則調整球的運行x軸方向朝右
if self.xpos <= 0:
self.xvelocity = abs(self.xvelocity)
self.angle = math.atan2(self.yvelocity, self.xvelocity)
self.fangle = math.degrees(self.angle) + 90
self.planed = pygame.transform.rotate(self.plane, -(self.fangle))
self.newRect = self.plane.get_rect(center=(self.xpos,self.ypos))
self.screen.blit(self.planed,self.newRect)
class Pao:
def __init__(self,screen):
self.start = (100,700)
self.end = None
self.screen = screen
self.count = 0
self.bullet_list = []
self.score = 0
self.font = pygame.font.Font(r'C:\Windows\Fonts\simsun.ttc', 16)
def getpos(self,pos2,r):
self.angle = math.atan2( pos2[1]-self.start[1],pos2[0]-self.start[0])
self.fangle = math.degrees(self.angle)
self.x = self.start[0]+r*math.cos(self.angle)
self.y = self.start[1]+r*math.sin(self.angle)
self.r = r
self.end = pos2
def move(self):
pygame.draw.line(self.screen, (255, 0, 0), self.start, (self.x,self.y), 5)
pygame.draw.circle(self.screen,(0,255,0),self.start,15)
text1 = self.font.render('score:%s' % self.score, True, (255, 255, 0))
self.screen.blit(text1, (45, 15))
if self.count % 30 == 19:
self.bullet_list.append(Bullet(self.x,self.y,self.fangle,self.screen,self.angle))
self.count += 1
for bullet in self.bullet_list:
if bullet.alive is False:
self.bullet_list.remove(bullet)
else:
bullet.move()
class Bullet:
def __init__(self,x,y,fangle,screen,angle):
self.posx = x
self.posy = y
self.fangle = fangle
self.angle = angle
self.alive = True
self.screen = screen
self.bullet = pygame.image.load('bullet2.png').convert_alpha()
self.r = random.randint(5,10)
self.newRect = None
def move(self):
self.planed = pygame.transform.rotate(self.bullet, -(self.fangle))
self.posx += self.r * math.cos(self.angle)
self.posy += self.r * math.sin(self.angle)
if self.posy > 700 or self.posy < 0 or self.posx < 0 or self.posx > 800:
self.alive = False
self.newRect = self.bullet.get_rect(center=(self.posx, self.posy))
if self.alive:
self.screen.blit(self.planed, self.newRect)
if __name__ == '__main__':
pygame.init()
screen = pygame.display.set_mode((800, 700))
pao = Pao(screen)
plane_list = []
for i in range(2):
plane_list.append((Plane('enemy.png',screen)))
fCount = 0
clock = pygame.time.Clock()
plane = random.choice(plane_list)
while True:
for event in pygame.event.get():
if event.type == pygame.QUIT:
pygame.quit()
sys.exit()
clock.tick(200)
screen.fill((0, 0, 0))
pao.getpos((plane.xpos, plane.ypos), 35)
pao.move()
for plane in plane_list:
plane_rect = plane.newRect
for bullet in pao.bullet_list:
try:
if plane_rect.colliderect(bullet.newRect):
bullet.alive = False
plane.alive = False
pao.score += 1
plane = random.choice(plane_list)
print('1')
except:
pass
if plane.alive:
plane.move_ball()
else:
plane.destroy(fCount, screen)
fCount += 1
pygame.display.update()
六、運行效果
寫完，比心！
到此這篇關于Python趣味挑戰之用pygame實現飛機塔防游戲的文章就介紹到這了,更多相關pygame實現飛機塔防游戲內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
這篇文章主要給大家介紹了關于webdriver.Chrome()沒反應的解決辦法,文中通過圖文介紹的非常詳細,對大家的學習或者工作具有一定的參考借鑒價值,需要的朋友可以參考下2024-03-03
今天小編就為大家分享一篇Python實現CNN的多通道輸入實例，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2020-01-01
這篇文章主要為大家詳細介紹了python實現圖片轉字符畫，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2021-02-02
在Python中,heapq模塊提供了實現最小堆算法的數據結構,能夠用作優先隊列,本文將詳細介紹heapq模塊,包括堆的基本概念、heapq的功能和示例代碼,需要的可以參考下2023-12-12
如何使用PyCharm將代碼上傳到GitHub上(圖文詳解)
這篇文章主要介紹了如何使用PyCharm將代碼上傳到GitHub上(圖文詳解)，文中通過圖文介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2020-04-04
二元運算符作用于位，進行逐位運算。二元運算只是組合兩個值以創建新值的規則。本文將為大家詳細講講Python?NumPy中的二元計算，需要的可以了解一下2022-08-08
Vim 插件是一個 .vim 的腳本文件，定義了函數、映射、語法規則和命令，可用于操作窗口、緩沖以及行。一般一個插件包含了命令定義和事件鉤子。當使用 Python 編寫 vim 插件時，函數外面是使用 VimL 編寫，盡管 VimL 學起來很快，但 Python 更加靈活2014-11-11
ubuntu16.04升級Python3.5到Python3.7的方法步驟
這篇文章主要介紹了ubuntu16.04升級Python3.5到Python3.7的方法步驟，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2020-08-08
這篇文章主要為大家詳細介紹了如何使用Python自動化處理日常任務,例如自動化文件管理,自動化定時任務,自動化發送郵件等,有需要的小伙伴可以參考一下2025-01-01
python數據可視化自制職位分析生成崗位分析數據報表
之前網上也有不少關于行業的分析數據，今天我們就根據不同崗位，公司類型規模，學歷要求，薪資分布等來進行分析，把職位分析功能集合封裝起來，做成一個小工具分享給大家吧2021-09-09