Android實現掃碼功能
更新時間：2021年05月31日 16:28:31 作者：baidu_24743861
這篇文章主要為大家詳細介紹了Android實現掃碼功能，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下
本文實例為大家分享了Android實現掃碼功能的具體代碼，供大家參考，具體內容如下
1、引入
implementation 'com.journeyapps:zxing-android-embedded:3.5.0'
2、使用：
public void initScan() {
IntentIntegrator integrator = new IntentIntegrator(this);
// 設置要掃描的條碼類型，ONE_D_CODE_TYPES：一維碼，QR_CODE_TYPES-二維碼
integrator.setDesiredBarcodeFormats(IntentIntegrator.QR_CODE_TYPES);
integrator.setCaptureActivity(ScanActivity.class); //設置打開攝像頭的Activity
integrator.setPrompt(""); //底部的提示文字，設為""可以置空
integrator.setCameraId(0); //前置或者后置攝像頭
integrator.setBeepEnabled(true); //掃描成功的「嗶嗶」聲，默認開啟
integrator.setBarcodeImageEnabled(true);
integrator.initiateScan();
}
@Override
protected void onActivityResult(int requestCode, int resultCode, Intent intent) {
super.onActivityResult(requestCode, resultCode, intent);
if (requestCode == IntentIntegrator.REQUEST_CODE) {
IntentResult scanResult = IntentIntegrator.parseActivityResult(requestCode, resultCode, intent);
if (scanResult != null && scanResult.getContents() != null) {
String result = scanResult.getContents();
LogUtil.d("掃碼返回: " + result);
try {
JSONObject jsonObject = new JSONObject(result);
if (jsonObject.has(Constant.USERPOLICEMENID)) {
//TODO 邏輯
} else {
ToastUtil.showShortToast("未掃描到有效的信息");
}
} catch (Exception e) {
ToastUtil.showShortToast("未掃描到有效的信息");
e.printStackTrace();
}
} else {
ToastUtil.showShortToast("未掃描到有效的信息");
}
}
}
3、ScanActivity
public class ScanActivity extends BackActivity {
@BindView(R.id.dbv)
DecoratedBarcodeView mDbv;
private CaptureManager captureManager;
@Override
protected int getLayoutId() {
getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN, WindowManager.LayoutParams.FLAG_FULLSCREEN);
return R.layout.activity_scan;
}
@Override
protected void init() {
super.init();
captureManager = new CaptureManager(this, mDbv);
captureManager.initializeFromIntent(getIntent(), getSavedInstanceState());
captureManager.decode();
}
@Override
public void onSaveInstanceState(@NotNull Bundle outState, @NotNull PersistableBundle outPersistentState) {
super.onSaveInstanceState(outState, outPersistentState);
captureManager.onSaveInstanceState(outState);
}
@Override
public boolean onKeyDown(int keyCode, KeyEvent event) {
return mDbv.onKeyDown(keyCode, event) || super.onKeyDown(keyCode, event);
}
@Override
protected void onPause() {
super.onPause();
captureManager.onPause();
}
@Override
public void onResume() {
super.onResume();
captureManager.onResume();
}
@Override
protected void onDestroy() {
super.onDestroy();
captureManager.onDestroy();
}
}
4、布局文件
activity_scan
<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:app="http://schemas.android.com/apk/res-auto"
xmlns:tools="http://schemas.android.com/tools"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:orientation="vertical"
tools:context=".ui.main.alarmassistant.ScanActivity">
<com.journeyapps.barcodescanner.DecoratedBarcodeView
android:id="@+id/dbv"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:fitsSystemWindows="true"
app:zxing_framing_rect_height="200dp"
app:zxing_framing_rect_width="200dp"
app:zxing_preview_scaling_strategy="fitXY"
app:zxing_scanner_layout="@layout/view_qr"
app:zxing_use_texture_view="true" />
</LinearLayout>
view_qr
<?xml version="1.0" encoding="utf-8"?>
<merge xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:app="http://schemas.android.com/apk/res-auto">
<com.journeyapps.barcodescanner.BarcodeView
android:id="@+id/zxing_barcode_surface"
android:layout_width="match_parent"
android:layout_height="match_parent"
app:zxing_framing_rect_height="50dp"
app:zxing_framing_rect_width="250dp" />
<com.x.x.widget.QrView
android:id="@+id/zxing_viewfinder_view"
android:layout_width="match_parent"
android:layout_height="match_parent"
app:zxing_possible_result_points="@color/color_white"
app:zxing_result_view="@color/zxing_custom_result_view"
app:zxing_viewfinder_laser="@color/color_white"
app:zxing_viewfinder_mask="@color/zxing_custom_viewfinder_mask" />
<TextView
android:id="@+id/zxing_status_view"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:layout_gravity="bottom|center_horizontal"
android:layout_marginBottom="30dp"
android:background="@color/zxing_transparent"
android:text="@string/zxing_msg_default_status"
android:textColor="@color/zxing_status_text" />
<com.x.common.widget.MyActionBar
android:id="@+id/action_bar"
android:layout_width="match_parent"
android:layout_height="wrap_content"
app:dark_mode="true"
app:title="掃一掃" />
</merge>
5、
/**
* 自定義掃描界面
*/
public class QrView extends ViewfinderView {
public int laserLinePosition = 0;
public float[] position = new float[]{0f, 0.5f, 1f};
public int[] colors = new int[]{0x0027B14D, 0xff27B14D, 0x0027B14D};
public LinearGradient linearGradient;
private int ScreenRate;
public QrView(Context context, AttributeSet attrs) {
super(context, attrs);
float density = context.getResources().getDisplayMetrics().density;
ScreenRate = (int) (15 * density);
}
@Override
public void onDraw(Canvas canvas) {
int CORNER_WIDTH = 15;
refreshSizes();
if (framingRect == null || previewFramingRect == null) {
return;
}
Rect frame = framingRect;
Rect previewFrame = previewFramingRect;
int width = canvas.getWidth();
int height = canvas.getHeight();
//繪制4個角
paint.setColor(getResources().getColor(R.color.color_white));//定義畫筆的顏色
canvas.drawRect(frame.left, frame.top, frame.left + ScreenRate, frame.top + CORNER_WIDTH, paint);
canvas.drawRect(frame.left, frame.top, frame.left + CORNER_WIDTH, frame.top + ScreenRate, paint);
canvas.drawRect(frame.right - ScreenRate, frame.top, frame.right, frame.top + CORNER_WIDTH, paint);
canvas.drawRect(frame.right - CORNER_WIDTH, frame.top, frame.right, frame.top + ScreenRate, paint);
canvas.drawRect(frame.left, frame.bottom - CORNER_WIDTH, frame.left + ScreenRate, frame.bottom, paint);
canvas.drawRect(frame.left, frame.bottom - ScreenRate, frame.left + CORNER_WIDTH, frame.bottom, paint);
canvas.drawRect(frame.right - ScreenRate, frame.bottom - CORNER_WIDTH, frame.right, frame.bottom, paint);
canvas.drawRect(frame.right - CORNER_WIDTH, frame.bottom - ScreenRate, frame.right, frame.bottom, paint);
// 畫出外部（即構圖矩形之外）變暗
paint.setColor(resultBitmap != null ? resultColor : maskColor);
canvas.drawRect(0, 0, width, frame.top, paint);
canvas.drawRect(0, frame.top, frame.left, frame.bottom, paint);
canvas.drawRect(frame.right, frame.top, width, frame.bottom, paint);
canvas.drawRect(0, frame.bottom, width, height, paint);
if (resultBitmap != null) {
// Draw the opaque result bitmap over the scanning rectangle
paint.setAlpha(CURRENT_POINT_OPACITY);
canvas.drawBitmap(resultBitmap, null, frame, paint);
} else {
laserLinePosition = laserLinePosition + 8;
if (laserLinePosition >= frame.height()) {
laserLinePosition = 0;
}
linearGradient = new LinearGradient(frame.left + 1, frame.top + laserLinePosition, frame.right - 1, frame.top + 10 + laserLinePosition, colors, position, Shader.TileMode.CLAMP);
// Draw a red "laser scanner" line through the middle to show decoding is active
paint.setShader(linearGradient);
//繪制掃描線
canvas.drawRect(frame.left + 1, frame.top + laserLinePosition, frame.right - 1, frame.top + 10 + laserLinePosition, paint);
paint.setShader(null);
float scaleX = frame.width() / (float) previewFrame.width();
float scaleY = frame.height() / (float) previewFrame.height();
List<ResultPoint> currentPossible = possibleResultPoints;
List<ResultPoint> currentLast = lastPossibleResultPoints;
int frameLeft = frame.left;
int frameTop = frame.top;
if (currentPossible.isEmpty()) {
lastPossibleResultPoints = null;
} else {
possibleResultPoints = new ArrayList<>(5);
lastPossibleResultPoints = currentPossible;
paint.setAlpha(CURRENT_POINT_OPACITY);
paint.setColor(resultPointColor);
for (ResultPoint point : currentPossible) {
canvas.drawCircle(frameLeft + (int) (point.getX() * scaleX), frameTop + (int) (point.getY() * scaleY), POINT_SIZE, paint);
}
}
if (currentLast != null) {
paint.setAlpha(CURRENT_POINT_OPACITY / 2);
paint.setColor(resultPointColor);
float radius = POINT_SIZE / 2.0f;
for (ResultPoint point : currentLast) {
canvas.drawCircle(frameLeft + (int) (point.getX() * scaleX), frameTop + (int) (point.getY() * scaleY), radius, paint);
}
}
postInvalidateDelayed(16, frame.left, frame.top, frame.right, frame.bottom);
}
}
}
以上就是本文的全部?jī)?nèi)容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。
您可能感興趣的文章:
相關文章
Android模擬器接收UDP數據包的若干問題分析
這篇文章主要介紹了Android模擬器接收UDP數據包的若干問題,結合實例形式較為詳細的分析了Android模擬器接收UDP數據的使用方法與相關注意事項,需要的朋友可以參考下2016-04-04
本篇文章通過流程講解給大家詳細介紹了Android用webView包裝WebAPP的方法以及需要注意的地方，需要的朋友參考學習下。2018-02-02
Android獲取SDcard目錄及創建文件夾的方法
今天小編就為大家分享一篇Android獲取SDcard目錄及創建文件夾的方法，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2018-08-08
Flutter加載圖片流程之ImageProvider源碼示例解析
這篇文章主要為大家介紹了Flutter加載圖片流程之ImageProvider源碼示例解析，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2023-04-04
一篇文章弄懂Android自定義viewgroup的相關難點
這篇文章主要給大家介紹了關于如何通過一篇文章弄懂Android中自定義viewgroup的一些相關難點，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2018-06-06
這篇文章主要介紹了Android AES加密工具類分享,本文給出了實現代碼和使用例子,本文使用PKCS5Padding加密方式實現,需要的朋友可以參考下2014-10-10
Android實現界面的自動跳轉功能
界面自動跳轉是指在應用啟動或某個特定界面顯示后,經過預定的時間或者滿足某些條件后,自動跳轉到另一個目標界面,本文小編給大家講解了Android實現界面的自動跳轉功能,感興趣的小伙伴跟著小編一起來看看吧2025-04-04
Android編程開發之TextView文字顯示和修改方法(附TextView屬性介紹)
這篇文章主要介紹了Android編程開發之TextView文字顯示和修改方法,結合實例詳細分析了Android中TextView控件關于文字的顯示及修改技巧,并附帶了TextView屬性介紹,需要的朋友可以參考下2015-12-12
Android利用Java優雅消除復雜條件表達式的方法
這篇文章主要介紹了Android利用Java優雅消除復雜條件表達式，文章圍繞主題展開詳細的內容介紹，具有一定的參考價值。感興趣的小伙伴可以參考一下2022-06-06
Android kotlin RecyclerView遍歷json實現列表數據的案例
這篇文章主要介紹了Android kotlin RecyclerView遍歷json實現列表數據的案例,本文給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友參考下吧2024-08-08