android藍牙簡單開發示例教程

更新時間：2021年12月08日 14:12:29 作者：東東旭huster

大家好，本篇文章主要講的是android藍牙簡單開發示例教程，感興趣的同學趕快來看一看吧，對你有幫助的話記得收藏一下

概述

前段時間學習了一些藍牙開發的知識，記錄一下Android中藍牙的簡單開發。下面是最重要的兩個類。

BluetoothAdapter : 藍牙適配器，通過getDefaultAdapter ()去獲取一個實例，如果設備不支持藍牙的話，返回的是一個null對象，通過它，可以打開、關閉藍牙，掃描設備、向指定設備創建socket通道…

BluetoothDevice : 代表一個設備對象，可以通過它獲取設備的名字、地址、類型等，也可以創建匹配，建立socket通道等等。

1、權限申請

<uses-permission android:name="android.permission.BLUETOOTH"/> 使用藍牙所需要的權限
<uses-permission android:name="android.permission.BLUETOOTH_ADMIN"/> 使用掃描和設置藍牙的權限（申明這一個權限必須申明上面一個權限）

Android6以上版本，掃描其他藍牙還需要位置權限

// Android 9 以下版本
<user-permission android:name="android.permission.ACCESS_COARSE_LOCATION"/> 
// Android 9 以上
<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"/>

2、打開藍牙

mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter();
// 如果設備不支持藍牙
if (mBluetoothAdapter == null){
    return;
}
// 設備支持藍牙功能，調用startActivityForResult去啟動藍牙
if (!mBluetoothAdapter.isEnabled()){
    startBlueTooth.launch(new Intent(BluetoothAdapter.ACTION_REQUEST_ENABLE));
}

打開藍牙功能是通過startActivity去啟動的，但是startActivity這個函數已經過期了，所以我使用官方推薦的Activity Result替代它

    ActivityResultLauncher<Intent> startBlueTooth = registerForActivityResult(new ActivityResultContracts.StartActivityForResult(),
            new ActivityResultCallback<ActivityResult>() {
                @Override
                public void onActivityResult(ActivityResult result) {
                    if (result==null){
                        Toast.makeText(BlueToothActivity.this, "open failed", Toast.LENGTH_SHORT).show();
                    }else {
                        if (result.getResultCode() == RESULT_CANCELED){
                            Toast.makeText(BlueToothActivity.this,"用戶取消",Toast.LENGTH_SHORT);
                        }
                    }
                }
            });

3、接收藍牙狀態的改變

通過廣播去接收藍牙狀態的改變

class BluetoothStateChangeReceiver extends BroadcastReceiver{
    public int DEFAULT_VALUE_BLUETOOTH = 1000;

    @Override
    public void onReceive(Context context, Intent intent) {
        String action = intent.getAction();
        if (BluetoothAdapter.ACTION_STATE_CHANGED.equals(action)){
            int state = intent.getIntExtra(BluetoothAdapter.EXTRA_STATE,DEFAULT_VALUE_BLUETOOTH);

            switch(state){
                case BluetoothAdapter.STATE_ON:
                    Log.d(TAG, "onReceive: open");
                    break;
                case BluetoothAdapter.STATE_OFF:
                    Log.d(TAG, "onReceive: off");
                    break;
                case BluetoothAdapter.STATE_TURNING_ON :
                    Log.d(TAG, "onReceive: 正在打開");
                    break;
                case BluetoothAdapter.STATE_TURNING_OFF:
                    Log.d(TAG, "onReceive: 正在關閉");
                    break;
            }
        }
    }
}

別忘了廣播的注冊和解注冊

IntentFilter filter = new IntentFilter(BluetoothAdapter.ACTION_STATE_CHANGED);
stateReceiver = new BluetoothStateChangeReceiver() ;
registerReceiver(stateReceiver,filter);

4、掃描其他的設備

同樣通過廣播接收，action是BluetoothDevice.ACTION_FOUND

    class MyReceiver extends BroadcastReceiver{
        @Override
        public void onReceive(Context context, Intent intent) {

            String action = intent.getAction();

            if (BluetoothDevice.ACTION_FOUND.equals(action)) {
                // 從intent對象中獲取藍牙設備的信息
                BluetoothDevice device = intent.getParcelableExtra(BluetoothDevice.EXTRA_DEVICE);
                // 當發現新設備不存在于配對列表中時添加
                if (device.getBondState() != BluetoothDevice.BOND_BONDED) {
                    blueNames.add(device.getName()+"\t"+device.getAddress());
                }
                blueAdpater.notifyDataSetChanged();
                Log.d(TAG, "onReceive: " + device.getName());
            }
        }
    }

動態注冊廣播

IntentFilter filter = new IntentFilter(BluetoothDevice.ACTION_FOUND);
registerReceiver(mReceiver,filter);

開啟掃描

mBluetoothAdapter.startDiscovery();

5、藍牙配對

    public class BondReceiver extends BroadcastReceiver{

        @Override
        public void onReceive(Context context, Intent intent) {
            if (BluetoothDevice.ACTION_BOND_STATE_CHANGED.equals(intent.getAction())){
                BluetoothDevice device = intent.getParcelableExtra(BluetoothDevice.EXTRA_DEVICE);
                switch(device.getBondState()){
                    case BluetoothDevice.BOND_BONDED:
                        Log.d(TAG, "onReceive: 配對完成");
                        break;
                    case BluetoothDevice.BOND_BONDING:
                        Log.d(TAG, "onReceive: 正在配對");
                        break;
                    case BluetoothDevice.BOND_NONE:
                        Log.d(TAG, "onReceive: 取消配對");
                        break;
                }
            }
        }
    }

6、獲取已經配對的設備

已經配對的設備會被存儲起來，通過BluetoothAdpater直接獲取即可

Set<BluetoothDevice> paireDevices = mBluetoothAdapter.getBondedDevices();
if (paireDevices.size()>0){
                        for (BluetoothDevice pairedDevice : pairedDevices) {
                        blueNames.add(pairedDevice.getName()+"  "+pairedDevice.getAddress());
                        Log.d(TAG, "onClick: "+pairedDevice.getName());
                    }
}

7、連接設備

想要在兩臺設備之間創建連接，必須實現客戶端和服務端機制，他們之間使用套接字機制進行連接，服務端開放服務器套接字，客戶端通過MAC地址向服務端發起連接?？蛻舳撕头斩艘圆煌姆绞将@得BluetoothSocket,當客戶端和服務端在同一個RFCOMM通道上分別擁有已連接的BluetoothSocket時，將他們視為彼此已經連接，于是每臺設備都獲得輸入和輸出流式傳輸，并開始傳輸數據。

連接技術

一種實現技術是自動將每臺設備準備為一個服務器，從而使每臺設備開放一個服務套接字并偵聽連接，在此情況下，任何一臺設備都可以發起與另一臺設備的連接并稱為客戶端。

服務器

設置服務器套接字并接受連接，步驟依次如下

1、調用listenUsingRfcommWithServiceRecord（）獲取一個BluetoothServerSocket, 該函數需要兩個參數，第一個是服務器的名稱，自己取一個即可，第二個是UUID，用來對信息做唯一性標識，我們可以從網上眾多UUID生成器中隨機的生成一個，然后使用UUID.fromString(String)初始化一個UUID。

2、通過accept()函數開始偵聽連接請求

只有遠程設備發送的連接請求中UUID與使用此套接字注冊的UUID相匹配時服務器才會接受請求，accept函數會返回已連接的BluetoothSocket

3、連接成功后調用close()關閉BluetoothSocket

 private class AcceptThread extends Thread{

        private final BluetoothServerSocket mmServerSocket;
        private String mSocketType;

        public AcceptThread(boolean secure){
            BluetoothServerSocket tmp = null;
            mSocketType = secure ? "secure" : "Insercure";
            try{
                if (secure){
                    tmp = bluetoothAdapter.listenUsingRfcommWithServiceRecord(NAME_SECURE,MY_UUID_SECURE);
                }else{
                    tmp = bluetoothAdapter.listenUsingRfcommWithServiceRecord(NAME_INSECURE,MY_UUID_INSECURE);
                }
            } catch (IOException e) {
                Log.e(TAG,"socket type"+ mSocketType + "listen() failed",e);
            }

            mmServerSocket = tmp;
        }

        @Override
        public void run() {
            Log.d(TAG, "Socket Type: " + mSocketType +
                    "BEGIN mAcceptThread" + this);
            setName("AcceptThread"+ mSocketType);

            BluetoothSocket socket = null;
            Log.d(TAG, "run: 開始監聽");
            while (true){
                try{
                    socket = mmServerSocket.accept();
                    Log.d("acceptThread", "run: 連接成功");
                    connected(socket,socket.getRemoteDevice(),mSocketType);
                } catch (IOException e) {
                    Log.e(TAG, "Socket Type: " + mSocketType + "accept() failed", e);
                    break;
                }

            }
            Log.i(TAG, "END mAcceptThread, socket Type: " + mSocketType);
        }

        public void cancel() {
            Log.d(TAG, "Socket Type" + mSocketType + "cancel " + this);
            try {
                mmServerSocket.close();
            } catch (IOException e) {
                Log.e(TAG, "Socket Type" + mSocketType + "close() of server failed", e);
            }
        }
    }

上面的secure和Insecure只是使用了不同的UUID而已。

客戶端

遠程設備開啟監聽后，我們就發起向此設備的連接，首先必須先獲得遠程設備的BluetoothDevice對象，然后獲取BluetoothSocket發起連接。

基本步驟如下

1、使用BluetoothDevice通過調用createRfcommSocketToServiceRecord(UUID) 獲取 BluetoothSocket。

2、通過connect發起連接

private class ConnectThread extends Thread{
        private final BluetoothSocket mmSocket;
        private final BluetoothDevice mmDevice;
        private String mSocketType;

        public ConnectThread(BluetoothDevice device, boolean secure){
            mmDevice = device;
            BluetoothSocket tmp = null;
            mSocketType = secure ? "Secure" : "Insecure";
            try {
                if (secure){
                    tmp = device.createRfcommSocketToServiceRecord(MY_UUID_SECURE);
                }else {
                    tmp = device.createRfcommSocketToServiceRecord(MY_UUID_INSECURE);
                }
            } catch (IOException e) {
                Log.e(TAG, "Socket Type: " + mSocketType + "create() failed", e);
            }
            mmSocket = tmp;
        }

        @Override
        public void run() {
            Log.i(TAG, "BEGIN mConnectThread SocketType:" + mSocketType);
            setName("ConnectThred"+mSocketType);

            // 總是取消發現，因為它會減慢連接
            bluetoothAdapter.cancelDiscovery();
            // connect
            // Make a connection to the BluetoothSocket
            try {
                // This is a blocking call and will only return on a
                // successful connection or an exception
                mmSocket.connect();
                Log.d(TAG, "run: socket連接成功");
            } catch (IOException e) {
                // Close the socket
                Log.d(TAG, "run: 關閉socket");
                try {
                    mmSocket.close();
                } catch (IOException e2) {
                    Log.e(TAG, "unable to close() " + mSocketType +
                            " socket during connection failure", e2);
                }

                return;
            }

            connected(mmSocket,mmDevice,mSocketType);
        }

        public void cancel(){
            try{
                mmSocket.close();
            } catch (IOException e) {
                Log.e(TAG, "close() of connect " + mSocketType + " socket failed", e);
            }
        }

    }

發送數據

連接成功后，我們就可以通過socket發送數據了，客戶端的Socket對象是BluetoothSocket, 服務端的socket是BluetoothServerSocket，特別注意不要混淆了。使用getInputStream和getOutputStream分別獲取通過套接字處理數據傳輸?shù)?code>InputStream和OutputStream。寫數據比較簡單，但是讀數據就需要一個單獨的線程一直監聽才行。

private class ConnectedThread extends Thread{
        private final BluetoothSocket mmSocket;
        private InputStream mmInStream;
        private OutputStream mmOutStream;

        public ConnectedThread(BluetoothSocket socket, String socketType) throws IOException {
            Log.d(TAG, "create ConnectedThread: " + socketType);
            mmSocket = socket;

            InputStream tmpIn = null;
            OutputStream tmpOut = null;

            try{
                tmpIn = socket.getInputStream();
                tmpOut = socket.getOutputStream();

                if (socket != null){
                    tmpOut.write(new String("hello").getBytes());
                    Log.d(TAG, "ConnectedThread: socket不是null");
                }
            } catch (IOException e) {
                Log.e(TAG,"temp socket not created", e);
            }

            mmInStream = tmpIn;
            mmOutStream = tmpOut;

            // mmOutStream.write(new String("hello").getBytes());
        }

        @RequiresApi(api = Build.VERSION_CODES.KITKAT)
        @Override
        public void run() {
            Log.i(TAG, "BEGIN mConnectedThread");
            byte[] buffer = new byte[1024];
            int bytes;

            while (true){
                try{
                    bytes = mmInStream.read(buffer);
                    // send the bytes to the ui Activity
                    String text = encodeByteToString(buffer,bytes);
                    Log.d(TAG, "run: 收到消息："+ text);
                    chatItems.add(text);
                    mHandler.sendMessage(mHandler.obtainMessage());
                } catch (IOException e) {
                    Log.d(TAG, "run: 沒有收到消息");
                    e.printStackTrace();
                    break;
                }
            }
        }

        public String encodeByteToString(byte[] data,int length) {
            byte[] temp = new byte[length];
            for (int i = 0; i < length; i++) {
                temp[i] = data[i];
            }
            try {
                return new String(temp,"utf-8");
            } catch (UnsupportedEncodingException e) {
                return "";
            }
        }


        public void write(byte[] buffer){
            try{
                mmOutStream.write(buffer);

                // mHandler.obtainMessage(Constants.MESSAGE_WRITE,-1,-1,buffer).sendToTarget();
            } catch (IOException e) {
                e.printStackTrace();
            }
        }

        public void cancel(){
            try{
                mmSocket.close();
                Log.d(TAG, "cancel: connectedThread");
            } catch (IOException e) {
                Log.e(TAG, "close() of connect socket failed", e);
            }
        }
    }

上面的例子我主要是學習官網上的藍牙聊天項目寫的代碼，大家也可以直接看官網項目。從上面的例子中可知，接受到的數據流都是一些二進制，要用到實際的項目中還需要進行一定的編碼和轉換。也就是自己編寫一些協議，學過socket編程的同學一定都懂，其實藍牙已經有很多的好用的協議了，就比如AVRCP（Audio Video Remote Control Profile），定義了藍牙設備和audio/video控制功能通信的特點和過程, 結合MediaSession 可以很容易的實現設備音視頻控制。

到此這篇關于android藍牙簡單開發示例教程的文章就介紹到這了,更多相關android藍牙開發內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: