快捷導航

C++ Qt繪制時鐘界面

更新時間：2021年12月30日 14:03:29 作者：你不懂細節

大家好，本篇文章主要講的是C++ Qt繪制時鐘界面，感興趣的同學趕快來看一看吧，對你有幫助的話記得收藏一下，方便下次瀏覽

首先來看一下效果：

大概就是這樣子，需要注意的是，這里你需要?jiǎng)?chuàng)建一個基類為Widget的界面來繪制時鐘，以至于后期你想把這個時鐘放到任意一個界面，你只需要在那個界面的ui里面添加一個widget,然后將它提升為這個時鐘界面，并設定它的大小。

widget.h文件

#ifndef WIDGET_H
#define WIDGET_H
 
#include<math.h>
#include<QResizeEvent>
#include<QGroupBox>
#include<QTimer>
#include<QTime>
#include<QPainter>
 
#include <QWidget>
 
namespace Ui {
class Widget;
}
 
class Widget : public QWidget
{
    Q_OBJECT
 
public:
    explicit Widget(QWidget *parent = 0);
    ~Widget();
protected:
    void paintEvent(QPaintEvent *event);
 
private:
    Ui::Widget *ui;
};
 
#endif // WIDGET_H

widget.cpp文件

#include "widget.h"
#include "ui_widget.h"
 
Widget::Widget(QWidget *parent) :
    QWidget(parent),
    ui(new Ui::Widget)
{
    ui->setupUi(this);
    QTimer *timer = new QTimer(this);  //連接信號與槽
    connect(timer, SIGNAL(timeout()), this, SLOT(update()));
    timer->start(1000);
    //設置窗體名稱與大小
    setWindowTitle(tr("Clock"));
    ui->setupUi(this);
    resize(350,350);
}
 
Widget::~Widget()
{
    delete ui;
}
 
void Widget::paintEvent(QPaintEvent *event)
{
    static const QPoint hourHand[3] =
    {
        QPoint(5, 14),
        QPoint(-5, 14),
        QPoint(0, -50)
    };
    static const QPoint minuteHand[3] =
    {
        QPoint(5, 14),
        QPoint(-5,14),
        QPoint(0, -70)
    };
    static const QPoint secondHand[3] =
    {
        QPoint(5, 14),
        QPoint(-5, 14),
        QPoint(0, -80)
    };
    static const QPoint line_long[2]=
    {
        QPoint(0,100),
        QPoint(0,80)
    };
    static const QPoint line_short[2]={
        QPoint(0,100),
        QPoint(0,95)
    };
    //繪制的范圍
    int side = qMin(width(), height());
    //獲取當前的時間
    QTime time = QTime::currentTime();
    //聲明用來繪圖用的painter
    QPainter painter(this);
    //繪制的圖像反鋸齒
    painter.setRenderHint(QPainter::Antialiasing);
    //重新定位坐標起始點，把坐標原點放到窗體的中央
    painter.translate(width() / 2, height() / 2);
    //在表盤內添加文字（任意）
    //painter.drawText(-75,-120,100,170,Qt::AlignRight,tr("ROLEX"));
    //設定畫布的邊界
    painter.scale(side / 200.0, side / 200.0);
    //填充邊線設為黑色，也可以設置為NoPen
    painter.setPen( Qt::black );
    //畫刷顏色設定
    painter.setBrush(Qt::black);
    //保存painter的狀態
    painter.save();
    //設置painter的旋轉角度
    painter.rotate(30.0 * ((time.hour() + time.minute() / 60.0)));
    //填充時針的區域
    painter.drawConvexPolygon(hourHand, 3);
    painter.restore();
    painter.setPen(Qt::black);
    //12個個刻度循環
    for (int i = 0; i < 12; ++i)
    {
        painter.drawLine(line_long[0],line_long[1]);
        painter.rotate(30.0);
    }
    //繪制分針轉角、刻度
    painter.setPen(Qt::black);
    painter.setBrush(Qt::black);
    painter.save();
    painter.rotate(6.0 * (time.minute() + time.second() / 60.0));
    painter.drawConvexPolygon(minuteHand, 3);
    painter.restore();
    painter.setPen(Qt::black);
    for (int j = 0; j < 60; ++j)
    {
        if ((j % 5) != 0)
        painter.drawLine(line_short[0],line_short[1]);
        painter.rotate(6.0);
    }
 
     //繪制分針轉角、刻度
    painter.setPen(Qt::black);
    painter.setBrush(Qt::black);
    painter.save();
    painter.rotate(6.0 * (time.minute() + time.second() / 60.0));
    painter.drawConvexPolygon(minuteHand, 3);
    painter.restore();
    painter.setPen(Qt::black);
    for (int j = 0; j < 60; ++j)
    {
        if ((j % 5) != 0)
        painter.drawLine(line_short[0],line_short[1]);
        painter.rotate(6.0);
    }
   //繪制秒針轉角
    painter.setPen(Qt::black);
    painter.setBrush(Qt::black);
    painter.save();
    painter.rotate(6.0*time.second());
    painter.drawConvexPolygon(secondHand,3);
    painter.restore();
 
}

main.cpp文件

#include "widget.h"
#include <QApplication>
 
int main(int argc, char *argv[])
{
    QApplication a(argc, argv);
    Widget w;
    w.show();
    return a.exec();
}

到此這篇關于C++ Qt繪制時鐘界面的文章就介紹到這了,更多相關C++ Qt繪制時鐘內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: