tensorflow卷積神經Inception?V3網絡結構代碼解析
更新時間：2022年05月06日 14:04:06 作者：fxfviolet
這篇文章主要為大家介紹了卷積神經Inception?V3網絡結構代碼解析，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪
前言
學習了Inception V3卷積神經網絡，總結一下對Inception V3網絡結構和主要代碼的理解。
GoogLeNet對網絡中的傳統卷積層進行了修改，提出了被稱為 Inception 的結構，用于增加網絡深度和寬度，提高深度神經網絡性能。從Inception V1到Inception V4有4個更新版本，每一版的網絡在原來的基礎上進行改進，提高網絡性能。本文介紹Inception V3的網絡結構和主要代碼。
1 非Inception Module的普通卷積層
首先定義一個非Inception Module的普通卷積層函數inception_v3_base，輸入?yún)?shù)inputs為圖片數據的張量。第1個卷積層的輸出通道數為32，卷積核尺寸為【3x3】，步長為2，padding模式是默認的VALID，第1個卷積層之后的張量尺寸變?yōu)?299-3)/2+1=149，即【149x149x32】。
后面的卷積層采用相同的形式，最后張量尺寸變?yōu)椤?5x35x192】。這幾個普通的卷積層主要使用了3x3的小卷積核，小卷積核可以低成本的跨通道的對特征進行組合。
def inception_v3_base(inputs,scepe=None):
with tf.variable_scope(scope,'InceptionV3',[inputs]):
with slim.arg_scope([slim.conv2d,slim.max_pool2d,slim.avg_pool2d],stride=1,padding='VALID'):
# 149 x 149 x 32
net = slim.conv2d(inputs,32,[3,3],stride=2,scope='Conv2d_1a_3x3')
# 147 x 147 x 32'
net = slim.conv2d(net,32),[3,3],scope='Conv2d_2a_3x3')
# 147 x 147 x 64
net = slim.conv2d(net,64,[3,3],padding='SAME',scope='Conv2d_2b_3x3')
# 73 x 73 x 64
net = slim.max_pool2d(net, [3, 3], stride=2, scope='MaxPool_3a_3x3')
# 73 x 73 x 80
net = slim.conv2d(net, 80, [1, 1], scope= 'Conv2d_3b_1x1')
# 71 x 71 x 192.
net = slim.conv2d(net, 192, [3, 3], scope='Conv2d_4a_3x3',reuse=tf.AUTO_REUSE)
# 35 x 35 x 192
net = slim.max_pool2d(net, [3, 3], stride=2, scope= 'MaxPool_5a_3x3') 2 三個Inception模塊組
接下來是三個連續的Inception模塊組，每個模塊組有多個Inception module組成。
下面是第1個Inception模塊組，包含了3個類似的Inception module，分別是：Mixed_5b，Mixed_5c，Mixed_5d。第1個Inception module有4個分支，
第1個分支是輸出通道為64的【1x1】卷積，
第2個分支是輸出通道為48的【1x1】卷積，再連接輸出通道為64的【5x5】卷積，
第3個分支是輸出通道為64的【1x1】卷積，再連接2個輸出通道為96的【3x3】卷積，
第4個分支是【3x3】的平均池化，再連接輸出通道為32的【1x1】卷積。
最后用tf.concat將4個分支的輸出合并在一起，輸出通道之和為54+64+96+32=256，最后輸出的張量尺寸為【35x35x256】。
第2個Inception module也有4個分支，與第1個模塊類似，只是最后連接輸出通道數為64的【1x1】卷積，最后輸出的張量尺寸為【35x35x288】。
第3個模塊與第2個模塊一樣。
with slim.arg_scope([slim.conv2d,slim.max_pool2d,slim.avg_pool2d],stride=1,padding='SAME'):
# 35 x 35 x 256
end_point = 'Mixed_5b'
with tf.variable_scope(end_point):
with tf.variable_scope('Branch_0'):
branch_0 = slim.conv2d(net,depth(64),[1,1],scope='Conv2d_0a_1x1')
with tf.variable_scope('Branch_1'):
branch_1 = slim.conv2d(net, depth(48), [1, 1], scope='Conv2d_0a_1x1')
branch_1 = slim.conv2d(branch_1, depth(64), [5, 5], scope='Conv2d_0b_5x5')
with tf.variable_scope('Branch_2'):
branch_2 = slim.conv2d(net, depth(64), [1, 1], scope='Conv2d_0a_1x1')
branch_2 = slim.conv2d(branch_2, depth(96), [3, 3],scope='Conv2d_0b_3x3')
branch_2 = slim.conv2d(branch_2, depth(96), [3, 3], scope='Conv2d_0c_3x3')
with tf.variable_scope('Branch_3'):
branch_3 = slim.avg_pool2d(net, [3, 3], scope='AvgPool_0a_3x3')
branch_3 = slim.conv2d(branch_3, depth(32), [1, 1], scope='Conv2d_0b_1x1')
net = tf.concat(axis=3, values=[branch_0, branch_1, branch_2, branch_3]) # 64+64+96+32=256
end_points[end_point] = net
# 35 x 35 x 288
end_point = 'Mixed_5c'
with tf.variable_scope(end_point):
with tf.variable_scope('Branch_0'):
branch_0 = slim.conv2d(net, depth(64), [1, 1], scope='Conv2d_0a_1x1')
with tf.variable_scope('Branch_1'):
branch_1 = slim.conv2d(net, depth(48), [1, 1], scope='Conv2d_0b_1x1')
branch_1 = slim.conv2d(branch_1, depth(64), [5, 5],scope='Conv_1_0c_5x5')
with tf.variable_scope('Branch_2'):
branch_2 = slim.conv2d(net, depth(64), [1, 1],scope='Conv2d_0a_1x1')
branch_2 = slim.conv2d(branch_2, depth(96), [3, 3],scope='Conv2d_0b_3x3')
branch_2 = slim.conv2d(branch_2, depth(96), [3, 3],scope='Conv2d_0c_3x3')
with tf.variable_scope('Branch_3'):
branch_3 = slim.avg_pool2d(net, [3, 3],scope='AvgPool_0a_3x3')
branch_3 = slim.conv2d(branch_3, depth(64), [1, 1],scope='Conv2d_0b_1x1')
net = tf.concat(axis=3, values=[branch_0, branch_1, branch_2, branch_3])
end_points[end_point] = net
# 35 x 35 x 288
end_point = 'Mixed_5d'
with tf.variable_scope(end_point):
with tf.variable_scope('Branch_0'):
branch_0 = slim.conv2d(net, depth(64), [1, 1], scope='Conv2d_0a_1x1')
with tf.variable_scope('Branch_1'):
branch_1 = slim.conv2d(net, depth(48), [1, 1], scope='Conv2d_0a_1x1')
branch_1 = slim.conv2d(branch_1, depth(64), [5, 5],scope='Conv2d_0b_5x5')
with tf.variable_scope('Branch_2'):
branch_2 = slim.conv2d(net, depth(64), [1, 1], scope='Conv2d_0a_1x1')
branch_2 = slim.conv2d(branch_2, depth(96), [3, 3],scope='Conv2d_0b_3x3')
branch_2 = slim.conv2d(branch_2, depth(96), [3, 3],scope='Conv2d_0c_3x3')
with tf.variable_scope('Branch_3'):
branch_3 = slim.avg_pool2d(net, [3, 3], scope='AvgPool_0a_3x3')
branch_3 = slim.conv2d(branch_3, depth(64), [1, 1],scope='Conv2d_0b_1x1')
net = tf.concat(axis=3, values=[branch_0, branch_1, branch_2, branch_3])
end_points[end_point] = net第2個Inception模塊組包含了5個Inception module，分別是Mixed_6a，Mixed_6b，Mixed_6ac，Mixed_6d，Mixed_6e。
每個Inception module包含有多個分支，第1個Inception module的步長為2，因此圖片尺寸被壓縮，最后輸出的張量尺寸為【17x17x768】。
第2個Inception module采用了Fractorization into small convolutions思想，串聯了【1x7】和【7x1】卷積，最后也是將多個通道合并。
第3、4個Inception module與第2個類似，都是用來增加卷積和非線性變化，提煉特征。張量尺寸不變，多個module后仍舊是【17x17x768】。
# 17 x 17 x 768.
end_point = 'Mixed_6a'
with tf.variable_scope(end_point):
with tf.variable_scope('Branch_0'):
branch_0 = slim.conv2d(net, depth(384), [3, 3], stride=2,padding='VALID', scope='Conv2d_1a_1x1')
with tf.variable_scope('Branch_1'):
branch_1 = slim.conv2d(net, depth(64), [1, 1], scope='Conv2d_0a_1x1')
branch_1 = slim.conv2d(branch_1, depth(96), [3, 3],scope='Conv2d_0b_3x3')
branch_1 = slim.conv2d(branch_1, depth(96), [3, 3], stride=2,padding='VALID', scope='Conv2d_1a_1x1')
with tf.variable_scope('Branch_2'):
branch_2 = slim.max_pool2d(net, [3, 3], stride=2, padding='VALID',scope='MaxPool_1a_3x3')
net = tf.concat(axis=3, values=[branch_0, branch_1, branch_2]) # (35-3)/2+1=17
end_points[end_point] = net
# 17 x 17 x 768.
end_point = 'Mixed_6b'
with tf.variable_scope(end_point):
with tf.variable_scope('Branch_0'):
branch_0 = slim.conv2d(net, depth(192), [1, 1], scope='Conv2d_0a_1x1')
with tf.variable_scope('Branch_1'):
branch_1 = slim.conv2d(net, depth(128), [1, 1], scope='Conv2d_0a_1x1')
branch_1 = slim.conv2d(branch_1, depth(128), [1, 7],scope='Conv2d_0b_1x7')
branch_1 = slim.conv2d(branch_1, depth(192), [7, 1],scope='Conv2d_0c_7x1')
with tf.variable_scope('Branch_2'):
branch_2 = slim.conv2d(net, depth(128), [1, 1], scope='Conv2d_0a_1x1')
branch_2 = slim.conv2d(branch_2, depth(128), [7, 1],scope='Conv2d_0b_7x1')
branch_2 = slim.conv2d(branch_2, depth(128), [1, 7],scope='Conv2d_0c_1x7')
branch_2 = slim.conv2d(branch_2, depth(128), [7, 1], scope='Conv2d_0d_7x1')
branch_2 = slim.conv2d(branch_2, depth(192), [1, 7],scope='Conv2d_0e_1x7')
with tf.variable_scope('Branch_3'):
branch_3 = slim.avg_pool2d(net, [3, 3], scope='AvgPool_0a_3x3')
branch_3 = slim.conv2d(branch_3, depth(192), [1, 1],scope='Conv2d_0b_1x1')
net = tf.concat(axis=3, values=[branch_0, branch_1, branch_2, branch_3])
end_points[end_point] = net
print(net.shape)
# 17 x 17 x 768.
end_point = 'Mixed_6c'
with tf.variable_scope(end_point):
with tf.variable_scope('Branch_0'):
ranch_0 = slim.conv2d(net, depth(192), [1, 1], scope='Conv2d_0a_1x1')
with tf.variable_scope('Branch_1'):
branch_1 = slim.conv2d(net, depth(160), [1, 1], scope='Conv2d_0a_1x1')
branch_1 = slim.conv2d(branch_1, depth(160), [1, 7],scope='Conv2d_0b_1x7')
branch_1 = slim.conv2d(branch_1, depth(192), [7, 1],scope='Conv2d_0c_7x1')
with tf.variable_scope('Branch_2'):
branch_2 = slim.conv2d(net, depth(160), [1, 1], scope='Conv2d_0a_1x1')
branch_2 = slim.conv2d(branch_2, depth(160), [7, 1],scope='Conv2d_0b_7x1')
branch_2 = slim.conv2d(branch_2, depth(160), [1, 7],scope='Conv2d_0c_1x7')
branch_2 = slim.conv2d(branch_2, depth(160), [7, 1],scope='Conv2d_0d_7x1')
branch_2 = slim.conv2d(branch_2, depth(192), [1, 7],scope='Conv2d_0e_1x7')
with tf.variable_scope('Branch_3'):
branch_3 = slim.avg_pool2d(net, [3, 3], scope='AvgPool_0a_3x3')
branch_3 = slim.conv2d(branch_3, depth(192), [1, 1],scope='Conv2d_0b_1x1')
net = tf.concat(axis=3, values=[branch_0, branch_1, branch_2, branch_3])
end_points[end_point] = net
# 17 x 17 x 768.
end_point = 'Mixed_6d'
with tf.variable_scope(end_point):
with tf.variable_scope('Branch_0'):
branch_0 = slim.conv2d(net, depth(192), [1, 1], scope='Conv2d_0a_1x1')
with tf.variable_scope('Branch_1'):
branch_1 = slim.conv2d(net, depth(160), [1, 1], scope='Conv2d_0a_1x1')
branch_1 = slim.conv2d(branch_1, depth(160), [1, 7], scope='Conv2d_0b_1x7')
branch_1 = slim.conv2d(branch_1, depth(192), [7, 1], scope='Conv2d_0c_7x1')
with tf.variable_scope('Branch_2'):
branch_2 = slim.conv2d(net, depth(160), [1, 1], scope='Conv2d_0a_1x1')
branch_2 = slim.conv2d(branch_2, depth(160), [7, 1], scope='Conv2d_0b_7x1')
branch_2 = slim.conv2d(branch_2, depth(160), [1, 7], scope='Conv2d_0c_1x7')
branch_2 = slim.conv2d(branch_2, depth(160), [7, 1], scope='Conv2d_0d_7x1')
branch_2 = slim.conv2d(branch_2, depth(192), [1, 7], scope='Conv2d_0e_1x7')
with tf.variable_scope('Branch_3'):
branch_3 = slim.avg_pool2d(net, [3, 3], sco e='AvgPool_0a_3x3')
branch_3 = slim.conv2d(branch_3, depth(192), [1, 1],scope='Conv2d_0b_1x1')
net = tf.concat(axis=3, values=[branch_0, branch_1, branch_2, branch_3])
end_points[end_point] = net
# 17 x 17 x 768.
end_point = 'Mixed_6e'
with tf.variable_scope(end_point):
with tf.variable_scope('Branch_0'):
branch_0 = slim.conv2d(net, depth(192), [1, 1], scope='Conv2d_0a_1x1')
with tf.variable_scope('Branch_1'):
branch_1 = slim.conv2d(net, depth(192), [1, 1], scope='Conv2d_0a_1x1')
branch_1 = slim.conv2d(branch_1, depth(192), [1, 7],
scope='Conv2d_0b_1x7')
branch_1 = slim.conv2d(branch_1, depth(192), [7, 1],
scope='Conv2d_0c_7x1')
with tf.variable_scope('Branch_2'):
branch_2 = slim.conv2d(net, depth(192), [1, 1], scope='Conv2d_0a_1x1')
branch_2 = slim.conv2d(branch_2, depth(192), [7, 1],
scope='Conv2d_0b_7x1')
branch_2 = slim.conv2d(branch_2, depth(192), [1, 7],
scope='Conv2d_0c_1x7')
branch_2 = slim.conv2d(branch_2, depth(192), [7, 1],
scope='Conv2d_0d_7x1')
branch_2 = slim.conv2d(branch_2, depth(192), [1, 7],
scope='Conv2d_0e_1x7')
with tf.variable_scope('Branch_3'):
branch_3 = slim.avg_pool2d(net, [3, 3], scope='AvgPool_0a_3x3')
branch_3 = slim.conv2d(branch_3, depth(192), [1, 1],
scope='Conv2d_0b_1x1')
net = tf.concat(axis=3, values=[branch_0, branch_1, branch_2, branch_3])
end_points[end_point] = net第3個Inception模塊組包含了3個Inception module，分別是Mxied_7a，Mixed_7b，Mixed_7c。
第1個Inception module包含了3個分支，與上面的結構類似，主要也是通過改變通道數、卷積核尺寸，包括【1x1】、【3x3】、【1x7】、【7x1】來增加卷積和非線性變化，提升網絡性能。
最后3個分支在輸出通道上合并，輸出張量的尺寸為【8 x 8 x 1280】。第3個Inception module后得到的張量尺寸為【8 x 8 x 2048】。
# 8 x 8 x 1280.
end_point = 'Mixed_7a'
with tf.variable_scope(end_point):
with tf.variable_scope('Branch_0'):
branch_0 = slim.conv2d(net, depth(192), [1, 1], scope='Conv2d_0a_1x1')
branch_0 = slim.conv2d(branch_0, depth(320), [3, 3], stride=2,
padding='VALID', scope='Conv2d_1a_3x3')
with tf.variable_scope('Branch_1'):
branch_1 = slim.conv2d(net, depth(192), [1, 1], scope='Conv2d_0a_1x1')
branch_1 = slim.conv2d(branch_1, depth(192), [1, 7],
scope='Conv2d_0b_1x7')
branch_1 = slim.conv2d(branch_1, depth(192), [7, 1],
scope='Conv2d_0c_7x1')
branch_1 = slim.conv2d(branch_1, depth(192), [3, 3], stride=2,
padding='VALID', scope='Conv2d_1a_3x3')
with tf.variable_scope('Branch_2'):
branch_2 = slim.max_pool2d(net, [3, 3], stride=2, padding='VALID',
scope='MaxPool_1a_3x3')
net = tf.concat(axis=3, values=[branch_0, branch_1, branch_2])
end_points[end_point] = net
# 8 x 8 x 2048.
end_point = 'Mixed_7b'
with tf.variable_scope(end_point):
with tf.variable_scope('Branch_0'):
branch_0 = slim.conv2d(net, depth(320), [1, 1], scope='Conv2d_0a_1x1')
with tf.variable_scope('Branch_1'):
branch_1 = slim.conv2d(net, depth(384), [1, 1], scope='Conv2d_0a_1x1')
branch_1 = tf.concat(axis=3, values=[
slim.conv2d(branch_1, depth(384), [1, 3], scope='Conv2d_0b_1x3'),
slim.conv2d(branch_1, depth(384), [3, 1], scope='Conv2d_0b_3x1')])
with tf.variable_scope('Branch_2'):
branch_2 = slim.conv2d(net, depth(448), [1, 1], scope='Conv2d_0a_1x1')
branch_2 = slim.conv2d(
branch_2, depth(384), [3, 3], scope='Conv2d_0b_3x3')
branch_2 = tf.concat(axis=3, values=[
slim.conv2d(branch_2, depth(384), [1, 3], scope='Conv2d_0c_1x3'),
slim.conv2d(branch_2, depth(384), [3, 1], scope='Conv2d_0d_3x1')])
with tf.variable_scope('Branch_3'):
branch_3 = slim.avg_pool2d(net, [3, 3], scope='AvgPool_0a_3x3')
branch_3 = slim.conv2d(
branch_3, depth(192), [1, 1], scope='Conv2d_0b_1x1')
net = tf.concat(axis=3, values=[branch_0, branch_1, branch_2, branch_3])
end_points[end_point] = net)
# 8 x 8 x 2048.
end_point = 'Mixed_7c'
with tf.variable_scope(end_point):
with tf.variable_scope('Branch_0'):
branch_0 = slim.conv2d(net, depth(320), [1, 1], scope='Conv2d_0a_1x1')
with tf.variable_scope('Branch_1'):
branch_1 = slim.conv2d(net, depth(384), [1, 1], scope='Conv2d_0a_1x1')
branch_1 = tf.concat(axis=3, values=[
slim.conv2d(branch_1, depth(384), [1, 3], scope='Conv2d_0b_1x3'),
slim.conv2d(branch_1, depth(384), [3, 1], scope='Conv2d_0c_3x1')])
with tf.variable_scope('Branch_2'):
branch_2 = slim.conv2d(net, depth(448), [1, 1], scope='Conv2d_0a_1x1')
branch_2 = slim.conv2d(
branch_2, depth(384), [3, 3], scope='Conv2d_0b_3x3')
branch_2 = tf.concat(axis=3, values=[
slim.conv2d(branch_2, depth(384), [1, 3], scope='Conv2d_0c_1x3'),
slim.conv2d(branch_2, depth(384), [3, 1], scope='Conv2d_0d_3x1')])
with tf.variable_scope('Branch_3'):
branch_3 = slim.avg_pool2d(net, [3, 3], scope='AvgPool_0a_3x3')
branch_3 = slim.conv2d(
branch_3, depth(192), [1, 1], scope='Conv2d_0b_1x1')
net = tf.concat(axis=3, values=[branch_0, branch_1, branch_2, branch_3])
end_points[end_point] = net3 Auxiliary Logits、全局平均池化、Softmax分類
Inception V3網絡的最后一部分是Auxiliary Logits、全局平均池化、Softmax分類。
首先是Auxiliary Logits，作為輔助分類的節點，對分類結果預測有很大幫助。
先通過end_points['Mixed_6e']得到Mixed_6e后的特征張量，之后接一個【5x5】的平均池化，步長為3，padding為VALID，張量尺寸從第2個模塊組的【17x17x768】變?yōu)椤?x5x768】。
接著連接一個輸出通道為128的【1x1】卷積和輸出通道為768的【5x5】卷積，輸出尺寸變?yōu)椤?x1x768】。
然后連接輸出通道數為num_classes的【1x1】卷積，輸出變?yōu)椤?x1x1000】。最后將輔助分類節點的輸出存儲到字典表end_points中。
with slim.arg_scope([slim.conv2d,slim.max_pool2d,slim.avg_pool2d],stride=1,padding='SAME'):
aux_logits = end_points['Mixed_6e']
print(aux_logits.shape)
with tf.variable_scope('AuxLogits'):
aux_logits = slim.avg_pool2d(aux_logits,[5,5],stride=3,padding='VALID',scope='AvgPool_1a_5x5')
aux_logits = slim.conv2d(aux_logits,depth(128),[1,1],scope='Conv2d_1b_1x1') # (17-5)/3+1=5
kernel_size = _reduced_kernel_size_for_small_input(aux_logits, [5, 5])
aux_logits = slim.conv2d(aux_logits, depth(768), kernel_size, weights_initializer=trunc_normal(0.01),
padding='VALID', scope='Conv2d_2a_{}x{}'.format(*kernel_size))
aux_logits = slim.conv2d( aux_logits, num_classes, [1, 1], activation_fn=None,
normalizer_fn=None, weights_initializer=trunc_normal(0.001),
scope='Conv2d_2b_1x1')
aux_logits = tf.squeeze(aux_logits, [1, 2], name='SpatialSqueeze')
end_points['AuxLogits'] = aux_logits最后對最后一個卷積層的輸出Mixed_7c進行一個【8x8】的全局平均池化，padding為VALID，輸出張量從【8 x 8 x 2048】變?yōu)椤? x 1 x 2048】，然后連接一個Dropout層，接著連接一個輸出通道數為1000的【1x1】卷積。
使用tf.squeeze去掉輸出張量中維數為1的維度。最后用Softmax得到最終分類結果。返回分類結果logits和包含各個卷積后的特征圖字典表end_points。
with tf.variable_scope('Logits'):
kernel_size = _reduced_kernel_size_for_small_input(net, [8, 8])
net = slim.avg_pool2d(net, kernel_size, padding='VALID',scope='AvgPool_1a_{}x{}'.format(*kernel_size))
end_points['AvgPool_1a'] = net
net = slim.dropout(net, keep_prob=dropout_keep_prob, scope='Dropout_1b')
end_points['PreLogits'] = net
logits = slim.conv2d(net, num_classes, [1, 1], activation_fn=None, normalizer_fn=None, scope='Conv2d_1c_1x1')
logits = tf.squeeze(logits, [1, 2], name='SpatialSqueeze')
end_points['Logits'] = logits
end_points['Predictions'] = slim.softmax(logits, scope='Predictions')
return logits,end_points參考文獻：
1. 《TensorFlow實戰》
以上就是卷積神經Inception V3網絡結構代碼解析的詳細內容，更多關于Inception V3卷積神經網絡的資料請關注腳本之家其它相關文章！
相關文章
python實現探測socket和web服務示例
這篇文章主要介紹了python實現探測socket和web服務示例,需要的朋友可以參考下2014-03-03
20個Python中正則表達式的應用與技巧小結
正則表達式是一種用來匹配字符串的模式,它可以在文本中搜索和匹配特定的字符串模式,本文我們將探討?Python?中?re?模塊的應用和一些技巧,希望可以幫助您更好地理解和利用正則表達式2024-04-04
Python turtle庫繪制菱形的3種方式小結
今天小編就為大家分享一篇Python turtle庫繪制菱形的3種方式小結，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2019-11-11
使用Python Tkinter創建文件生成工具的操作步驟
我們將使用Python的Tkinter模塊創建一個簡單的文件生成工具,這個工具可以用來創建Excel、文本、Python腳本和Word文檔等不同類型的文件,感興趣的朋友可以參考下2024-04-04
Django objects.all()、objects.get()與objects.filter()之間的區別介紹
這篇文章主要給大家介紹了關于Django objects.all()、objects.get()與objects.filter()之間的區別，文中介紹的非常詳細，對大家具有一定的參考學習價值，需要的朋友們下面來一起看看吧。2017-06-06
詳解Django中Request對象的相關用法
這篇文章主要介紹了詳解Django中Request對象的相關用法,Django是Python重多人氣框架中最著名的一個,需要的朋友可以參考下2015-07-07
這篇文章主要為大家詳細介紹了python實現自動登錄，填充網頁表單，從而自動登錄WEB門戶，具有一定的參考價值，感興趣的小伙伴們可以參考一下2018-09-09
大家好，本篇文章主要講的是Python處理excel與txt文件詳解，感興趣的同學趕快來看一看吧，對你有幫助的話記得收藏一下，方便下次瀏覽2021-12-12
在本篇內容中我們給大家整理了關于python面向?qū)ο缶幊袒A(chǔ)的觀點分析以及知識點整理，有需要的朋友們學習下。2019-05-05
這篇文章主要介紹了Python抽象基類的定義與使用方法，Python的抽象基類是指必須讓繼承它的子類去實現它所要求的抽象方法的類，下面文章內容將詳細介紹相關資料,需要的朋友可以參考一下2021-10-10