Python實現向好友發送微信消息優化篇
更新時間：2022年06月09日 09:04:54 作者：Qwertyuiop2016
利用python可以實現微信消息發送功能，怎么實現呢？你肯定會想著很復雜，但是python的好處就是很多人已經把接口打包做好了，只需要調用即可，今天通過本文給大家分享使用?Python?實現微信消息發送的思路代碼，一起看看吧
前言
之前說了怎么寫機器碼到內存，然后調用?，F(xiàn)在說說怎么優化。
第二次優化
再看一遍c語言的代碼
void SendText( wchar_t* wsTextMsg) {
// 發送的好友，filehelper是文件傳輸助手
wchar_t wsWxId[0x10] = L"filehelper";
WxBaseStruct wxWxid(wsWxId);
// 發送的消息內容
WxBaseStruct wxTextMsg(wsTextMsg);
wchar_t** pWxmsg = &wxTextMsg.buffer;
char buffer[0x3B0] = { 0 };
char wxNull[0x100] = { 0 };
DWORD dllBaseAddress = (DWORD)GetModuleHandleA("WeChatWin.dll");
// 發消息的函數call地址
DWORD callAddress = dllBaseAddress + 0x521D30;
__asm {
lea eax, wxNull;
push 0x1;
push eax;
mov edi, pWxmsg;
push edi;
lea edx, wxWxid;
lea ecx, buffer;
call callAddress;
add esp, 0xC;
}
}上面的代碼真正發消息的是asm里面的代碼，之前的c代碼都是在組裝內存數據。那我們是不是可以用Python組裝數據，只講下面的匯編轉為機器碼寫入內存調用，這樣就少了很多無用的機器碼。
改完的SendText函數如下
wchar_t wsWxId[0x10] = L"filehelper";
wchar_t wsTextMsg[0x100] = L"test";
WxBaseStruct wxWxid(wsWxId);
WxBaseStruct wxTextMsg(wsTextMsg);
wchar_t** pWxmsg = &wxTextMsg.buffer;
char buffer[0x3B0] = { 0 };
char wxNull[0x100] = { 0 };
DWORD dllBaseAddress = (DWORD)GetModuleHandleA("WeChatWin.dll");;
DWORD callAddress = dllBaseAddress + 0x521D30;
void SendText() {
__asm {
lea eax, wxNull;
push 0x1;
push eax;
mov edi, pWxmsg;
push edi;
lea edx, wxWxid;
lea ecx, buffer;
call callAddress;
add esp, 0xC;
}
}
匯編代碼：
[]里面包含的類型和變量名其實就是地址，只需要將地址改成用Python構造的地址就可以了
完整代碼如下：
import os
import pymem
import ctypes
import time
def convert_addr(addr):
if isinstance(addr, int):
addr = hex(addr)
if addr.startswith("0x") or addr.startswith("0X"):
addr = addr[2:]
if len(addr) < 8:
addr = (8-len(addr))*'0' + addr
tmp = []
for i in range(0, 8, 2):
tmp.append(addr[i:i+2])
tmp.reverse()
return ''.join(tmp)
def WxBaseStruct(process_handle, content):
struct_address = pymem.memory.allocate_memory(process_handle, 20)
bcontent = content.encode('utf-16le')
content_address = pymem.memory.allocate_memory(process_handle, len(bcontent)+16)
pymem.ressources.kernel32.WriteProcessMemory(process_handle, content_address, bcontent, len(bcontent), None)
pymem.memory.write_int(process_handle, struct_address, content_address)
pymem.memory.write_int(process_handle, struct_address+0x4, len(content))
pymem.memory.write_int(process_handle, struct_address+0x8, len(content)*2)
pymem.memory.write_int(process_handle, struct_address+0xC, 0)
pymem.memory.write_int(process_handle, struct_address+0x10, 0)
return struct_address, content_address
def start_thread(process_handle, address, params=None):
params = params or 0
NULL_SECURITY_ATTRIBUTES = ctypes.cast(0, pymem.ressources.structure.LPSECURITY_ATTRIBUTES)
thread_h = pymem.ressources.kernel32.CreateRemoteThread(
process_handle,
NULL_SECURITY_ATTRIBUTES,
0,
address,
params,
0,
ctypes.byref(ctypes.c_ulong(0))
)
last_error = ctypes.windll.kernel32.GetLastError()
if last_error:
pymem.logger.warning('Got an error in start thread, code: %s' % last_error)
pymem.ressources.kernel32.WaitForSingleObject(thread_h, -1)
return thread_h
def main(wxpid, wxid, msg):
process_handle = pymem.process.open(wxpid)
wxNull_address = pymem.memory.allocate_memory(process_handle, 0x100)
buffer_address = pymem.memory.allocate_memory(process_handle, 0x3B0)
wxid_struct_address, wxid_address = WxBaseStruct(process_handle, wxid)
msg_struct_address, msg_address = WxBaseStruct(process_handle, msg)
process_WeChatWin_handle = pymem.process.module_from_name(process_handle, "WeChatWin.dll")
call_address = process_WeChatWin_handle.lpBaseOfDll + 0x521D30
call_p_address = pymem.memory.allocate_memory(process_handle, 4)
pymem.memory.write_int(process_handle, call_p_address, call_address)
format_code = '''
57
8D05 {wxNull}
6A 01
50
8D3D {wxTextMsg}
57
8D15 {wxWxid}
8D0D {buffer}
FF15 {callAddress}
83C4 0C
5F
C3
'''
shellcode = format_code.format(wxNull=convert_addr(wxNull_address),
wxTextMsg=convert_addr(msg_struct_address),
wxWxid=convert_addr(wxid_struct_address),
buffer=convert_addr(buffer_address),
callAddress=convert_addr(call_p_address))
shellcode = bytes.fromhex(shellcode.replace(' ', '').replace('\n', ''))
shellcode_address = pymem.memory.allocate_memory(process_handle, len(shellcode)+5)
pymem.ressources.kernel32.WriteProcessMemory(process_handle, shellcode_address, shellcode, len(shellcode), None)
thread_h = start_thread(process_handle, shellcode_address)
time.sleep(0.5)
pymem.memory.free_memory(process_handle, wxNull_address)
pymem.memory.free_memory(process_handle, buffer_address)
pymem.memory.free_memory(process_handle, wxid_struct_address)
pymem.memory.free_memory(process_handle, wxid_address)
pymem.memory.free_memory(process_handle, msg_struct_address)
pymem.memory.free_memory(process_handle, msg_address)
pymem.memory.free_memory(process_handle, call_p_address)
pymem.memory.free_memory(process_handle, shellcode_address)
pymem.process.close_handle(process_handle)
if __name__ == "__main__":
wxpid = 16892
wxid = "filehelper"
msg = "python test"
main(wxpid, wxid, msg)第三次優化
直接在Python里寫匯編，然后自動轉機器碼寫入內存。使用的是Python的keystone庫
# -*- coding: utf-8 -*-
import os
import pymem
import ctypes
import time
from keystone import Ks, KS_ARCH_X86, KS_MODE_32
def asm2code(asm_code, syntax=0):
ks = Ks(KS_ARCH_X86, KS_MODE_32)
bytes_code, _ = ks.asm(asm_code, as_bytes=True)
return bytes_code
def WxBaseStruct(process_handle, content):
struct_address = pymem.memory.allocate_memory(process_handle, 20)
bcontent = content.encode('utf-16le')
content_address = pymem.memory.allocate_memory(process_handle, len(bcontent)+16)
pymem.ressources.kernel32.WriteProcessMemory(process_handle, content_address, bcontent, len(bcontent), None)
pymem.memory.write_int(process_handle, struct_address, content_address)
pymem.memory.write_int(process_handle, struct_address+0x4, len(content))
pymem.memory.write_int(process_handle, struct_address+0x8, len(content)*2)
pymem.memory.write_int(process_handle, struct_address+0xC, 0)
pymem.memory.write_int(process_handle, struct_address+0x10, 0)
return struct_address, content_address
def start_thread(process_handle, address, params=None):
params = params or 0
NULL_SECURITY_ATTRIBUTES = ctypes.cast(0, pymem.ressources.structure.LPSECURITY_ATTRIBUTES)
thread_h = pymem.ressources.kernel32.CreateRemoteThread(
process_handle,
NULL_SECURITY_ATTRIBUTES,
0,
address,
params,
0,
ctypes.byref(ctypes.c_ulong(0))
)
last_error = ctypes.windll.kernel32.GetLastError()
if last_error:
pymem.logger.warning('Got an error in start thread, code: %s' % last_error)
pymem.ressources.kernel32.WaitForSingleObject(thread_h, -1)
return thread_h
def main(wxpid, wxid, msg):
process_handle = pymem.process.open(wxpid)
wxNull_address = pymem.memory.allocate_memory(process_handle, 0x100)
buffer_address = pymem.memory.allocate_memory(process_handle, 0x3B0)
wxid_struct_address, wxid_address = WxBaseStruct(process_handle, wxid)
msg_struct_address, msg_address = WxBaseStruct(process_handle, msg)
process_WeChatWin_handle = pymem.process.module_from_name(process_handle, "WeChatWin.dll")
call_address = process_WeChatWin_handle.lpBaseOfDll + 0x521D30
call_p_address = pymem.memory.allocate_memory(process_handle, 4)
pymem.memory.write_int(process_handle, call_p_address, call_address)
format_asm_code = '''
push edi;
lea eax,dword ptr ds:[{wxNull:#02x}];
push 0x1;
push eax;
lea edi,dword ptr ds:[{wxTextMsg:#02x}];
push edi;
lea edx,dword ptr ds:[{wxWxid:#02x}];
lea ecx,dword ptr ds:[{buffer:#02x}];
call dword ptr ds:[{callAddress:#02x}];
add esp, 0xC;
pop edi;
ret;
'''
asm_code = format_asm_code.format(wxNull=wxNull_address,
wxTextMsg=msg_struct_address,
wxWxid=wxid_struct_address,
buffer=buffer_address,
callAddress=call_p_address)
shellcode = asm2code(asm_code.encode())
shellcode_address = pymem.memory.allocate_memory(process_handle, len(shellcode)+5)
pymem.ressources.kernel32.WriteProcessMemory(process_handle, shellcode_address, shellcode, len(shellcode), None)
thread_h = start_thread(process_handle, shellcode_address)
time.sleep(0.5)
pymem.memory.free_memory(process_handle, wxNull_address)
pymem.memory.free_memory(process_handle, buffer_address)
pymem.memory.free_memory(process_handle, wxid_struct_address)
pymem.memory.free_memory(process_handle, wxid_address)
pymem.memory.free_memory(process_handle, msg_struct_address)
pymem.memory.free_memory(process_handle, msg_address)
pymem.memory.free_memory(process_handle, call_p_address)
pymem.memory.free_memory(process_handle, shellcode_address)
pymem.process.close_handle(process_handle)
if __name__ == "__main__":
wxpid = 18604
wxid = "filehelper"
msg = "python test msg"
main(wxpid, wxid, msg)到此這篇關于Python實現向好友發送微信消息優化篇的文章就介紹到這了,更多相關Python微信消息內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
在日常工作和生活中,保護PDF文件的隱私和安全至關重要,Python提供了一些強大的庫,使得加密和解密PDF文件變得相對簡單,本文將詳細介紹如何使用PyPDF2庫來加密和解密PDF文件,需要的朋友可以參考下2025-03-03
說到童年愛玩的電腦游戲,最國民的莫過于金山打字通，接著是掃雷、紅心大戰，而紅極一時的單機游戲當屬《大富翁》。本文將通過Python的Pygame模塊制作"長沙版"的大富翁，需要的可以參考一下2022-02-02
python 列表合并字符串，我們一般會用到字符串的join方法來操作。下面通過代碼的形式，詳細的說下list怎么拼成字符串？2013-03-03
python使用clear方法清除字典內全部數據實例
這篇文章主要介紹了python使用clear方法清除字典內全部數據,實例分析了Python中clear方法清空字典內數據的相關技巧,具有一定參考借鑒價值,需要的朋友可以參考下2015-07-07
這篇文章主要為大家詳細介紹了Python的函數基礎，使用了函數參數和遞歸函數，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2022-01-01
這篇文章主要介紹了Python的Tornado框架異步編程入門實例,異步編程的思維與普通編程比起來有些不同,需要的朋友可以參考下2015-04-04
這篇文章主要介紹了python中的句柄操作的方法示例，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2019-06-06
keras訓練曲線,混淆矩陣,CNN層輸出可視化實例
這篇文章主要介紹了keras訓練曲線,混淆矩陣,CNN層輸出可視化實例，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2020-06-06
利用Python通過獲取剪切板數據實現百度劃詞搜索功能
大家是不是嫌棄每次打開百度太麻煩？今天教大家利用Python通過獲取剪切板數據實現百度劃詞搜索功能,用程序直接打開網頁,需要的朋友可以參考下2021-06-06
正則表達式是一個特殊的字符序列，它能幫助你方便的檢查一個字符串是否與某種模式匹配。本文為大家總結了一些正則表達式常用語法，希望有所幫助2022-08-08