快捷導航

Qt重寫QStackedWidget模擬實現home界面滑動效果

更新時間：2022年11月29日 17:06:06 作者：音視頻開發老舅

這篇文章主要為大家詳細介紹了Qt如何通過重寫QStackedWidget模擬實現home界面滑動效果，文中的實現過程講解詳細，感興趣的小伙伴可以跟隨小編一起學習一下

1.SmoothStackedWidget類實現

demo界面如下圖所示(創建了4個子界面):

(支持快滑,慢滑):

如果是慢滑,則根據當前滑到的界面處于哪一頁占比更多,則就跳到哪里.

否則就是快滑,根據滑動的偏移值來決定跳轉

同樣也支持邊緣滑動檢測(已在最邊緣時,則滑動速率減慢,告訴用戶已到邊緣):

2.代碼實現

頭文件如下所示：

#ifndef SMOOTHSTACKEDWIDGET_H
#define SMOOTHSTACKEDWIDGET_H
 
#include <QObject>
#include <QWidget>
#include <QStackedWidget>
#include <QAbstractScrollArea>
#include <QPixmap>
#include <QPropertyAnimation>
 
class SmoothStackedWidget : public QStackedWidget
{
    Q_OBJECT
 
#define SMOOTH_MAX_MS   900                   //平滑滑動時的最大延遲時間
#define SMOOTH_EDGE_MOVE_RATIO   0.14         //邊緣移動系數,范圍0~1,越低越慢
 
    typedef enum tagScrollMouseDragInfo {
          MOUSE_RELEASE = 0,                       //鼠標離開
          MOUSE_PRESS = 1,                         //按下
          MOUSE_PRESS_MOVE = 2,                    //按下移動
          MOUSE_RELEASE_MOVE = 3                   //鼠標離開并滑動
    }Scroll_Mouse_Drag_INFO_E;
 
    typedef enum tagSmoothAnimationSwitchInfo {
          SWITCH_PRE = -1,                      //切換上一頁
          SWITCH_NONE = 0,                      //不切換
          SWITCH_NEXT = 1,                      //切換下一頁
    }AnimationSwitch_Drag_INFO_E;
 
    Scroll_Mouse_Drag_INFO_E m_dragFlag = MOUSE_RELEASE;
    AnimationSwitch_Drag_INFO_E m_switchFlag = SWITCH_NONE;
  
    QWidget *m_parent;
 
    QWidget m_smoothWidget;
 
    int m_smoothCurrentIndex=-1;
 
    QPropertyAnimation *animation;
 
    float m_smoothMovePos;
 
    bool eventFilter(QObject *obj, QEvent *evt) override;
 
    void paintEvent(QPaintEvent *event) override;
 
    void resizeEvent(QResizeEvent *event) override;
 
    void SmoothLoadPixmap(bool isSmoothUpdate = false);
    void SmoothStartMove();
 
    void SmoothMove(int offset);
 
    void SmoothAnimationStart(int startPos, int endPos, int durationMs);
 
    void SmoothAnimationInit();
 
public:
    explicit SmoothStackedWidget(QWidget *parent = nullptr);
 
    int addWidget(QAbstractScrollArea *w);
 
    int addWidget(QWidget *w);
 
    void setCurrentIndex(int index);
 
    void removeWidget(QWidget *w);
 
    void IconUpdate();      //刷新頁數標簽
 
    void UpdateSmooth();
 
signals:
 
protected slots:
    void OnSmoothAnimationFinished();
 
};
 
#endif // SMOOTHSTACKEDWIDGET_H

其中eventFilter()函數如下所示:

當鼠標(手指)按下移動時,則調用SmoothMove(offset),通過offset來動態顯示滑動的界面.

當鼠標(手指)松開后,則調用SmoothAnimationStart()來實現界面移動(到底是切換上一頁、還是切換下一頁、還是當前頁).

bool SmoothStackedWidget::eventFilter(QObject *obj, QEvent *evt)
{
    QMouseEvent *mouse =  dynamic_cast<QMouseEvent *>(evt);
    QWidget *w =  dynamic_cast<QWidget *>(obj);
 
    static int pressPoint_x   = 0;          //按下的坐標
    static int dragPoint_x    = -1;         //拖動時的坐標
    static qint64 pressMSec ;
 
    if(mouse && w && animation->state() == QAbstractAnimation::Stopped)
    {
         if( mouse->type() ==QEvent::MouseButtonPress)    //首次按下
        {
           pressMSec = QDateTime::currentDateTime().toMSecsSinceEpoch();     //記錄按下的時間
           dragPoint_x  = mouse->pos().x();               //當前坐標
           pressPoint_x = dragPoint_x;                    //按下的位置
           m_dragFlag = MOUSE_PRESS;
        }
         else if(mouse->type() == QEvent::MouseButtonRelease &&
                 m_dragFlag == MOUSE_PRESS)               //未移動
        {
           m_dragFlag = MOUSE_RELEASE;
        }
         else if(mouse->type() == QEvent::MouseMove &&
                 m_dragFlag == MOUSE_PRESS)               //初次滑動,判斷移動閥值,避免誤操作
        {
            if(qAbs(dragPoint_x - mouse->pos().x()) > 3)     //判斷移動閥值,避免誤操作
            {
               dragPoint_x = mouse->pos().x();
               SmoothStartMove();
               m_dragFlag = MOUSE_PRESS_MOVE;
            }
        }
         else if(mouse->type() == QEvent::MouseMove &&
                 m_dragFlag== MOUSE_PRESS_MOVE )             //正在滑動
        {
            int offset = ( mouse->pos().x() - dragPoint_x);
            SmoothMove(offset);
            dragPoint_x = mouse->pos().x();
        }
        else if(mouse->type() == QEvent::MouseButtonRelease &&
                m_dragFlag == MOUSE_PRESS_MOVE)               //滑動結束,啟動平滑滑動
        {
             int durationMs= QDateTime::currentDateTime().toMSecsSinceEpoch()-pressMSec;
             SmoothAnimationStart(pressPoint_x,mouse->pos().x(),durationMs);
             m_dragFlag = MOUSE_RELEASE;
        }
    }
 
    return QWidget::eventFilter(obj,evt);
}

SmoothAnimationStart()函數如下所示:

void  SmoothStackedWidget::SmoothAnimationStart(int startPos, int endPos, int durationMs)
{
    int pixelPerSecond=qAbs(endPos - startPos)*1000/durationMs;       //計算每秒像素點
    m_switchFlag = SWITCH_NONE;
    int moveX = qAbs(m_smoothWidget.x());
    float temp = width()*0.5;
    int animationEndX;
 
    //慢速滑動(速度過慢||時間過長),則根據當前滑到哪里,就跳到哪里
    if(pixelPerSecond<300 || durationMs > 1000) {
        if(moveX < (temp)) {        //[0,width/2] = 上一頁
            if(currentIndex()==0) {
                animationEndX = -width();
            } else {
                animationEndX = 0;
                m_switchFlag = SWITCH_PRE;
            }
        } else if(moveX < (temp*3)) {    //[width/2,width*3/2] = 當前一頁
            animationEndX = -width();
        } else {
            if(currentIndex()==(count()-1)) {   //[width*3/2,width*2] = 下一頁
                animationEndX = -width();
            } else {
                animationEndX = -width()*2;
                m_switchFlag = SWITCH_NEXT;
            }
        }
 
    } else {　　　　// 否則就是快速滑動
        if(startPos < endPos) { //向右滑動
            if(currentIndex()==0) {
                animationEndX = -width();
            } else {
                animationEndX = 0;
                m_switchFlag = SWITCH_PRE;
            }
        } else {         //向左滑動
            if(currentIndex()==(count()-1)) {
                animationEndX = -width();
            } else {
                animationEndX = -width()*2;
                m_switchFlag = SWITCH_NEXT;
            }
        }
    }
 
    //根據每秒滑動像素點,來計算滑動時長.
    int animationDuration = durationMs;
    float xOffsetRatio = qAbs(animationEndX - m_smoothWidget.x()) / (static_cast<float>(width())); //計算滑動占整屏比例
 
    if(animationDuration > (SMOOTH_MAX_MS * xOffsetRatio)) //滑動時間過大,則重置
        animationDuration = SMOOTH_MAX_MS * xOffsetRatio;
 
 
    animation->setDuration(animationDuration);
    animation->setStartValue(m_smoothWidget.geometry());
    animation->setEndValue(QRect(animationEndX, m_smoothWidget.y(), m_smoothWidget.width(), m_smoothWidget.height()));
    animation->start();
}

到此這篇關于Qt重寫QStackedWidget模擬實現home界面滑動效果的文章就介紹到這了,更多相關Qt QStackedWidget界面滑動內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: