前言

dynamic-tp是一個輕量級的動態線程池插件，它是一個基于配置中心的動態線程池，線程池的參數可以通過配置中心配置進行動態的修改，目前支持的配置中心有Apollo,Nacos和Zookeeper，同時dynamic-tp支持線程池的監控和報警，具體特性如下：

• 基于Spring框架，現只支持SpringBoot項目使用，輕量級，引入 starter 即可使用
• 基于配置中心實現線程池參數動態調整，實時生效；集成主流配置中心，已支持 Nacos、Apollo，Zookeeper， 同時也提供 SPI 接口可自定義擴展實現
• 內置通知報警功能，提供多種報警維度（配置變更通知、活性報警、容量閾值報警、拒絕策略觸發報警）， 默認支持企業微信、釘釘報警，同時提供 SPI 接口可自定義擴展實現
• 內置線程池指標采集功能，支持通過 MicroMeter、JsonLog 日志輸出、Endpoint 三種方式，可通過 SPI 接口自定義擴展實現
• 集成管理常用第三方組件的線程池，已集成 SpringBoot 內置 WebServer（tomcat、undertow、jetty）的線程池管理
• Builder 提供TTL包裝功能，生成的線程池支持上下文信息傳遞

具體介紹及使用方式

為了方便用戶快速接入，筆者這里對Zookeeper配置中心接入做一個詳細的介紹，其他配置中心的demo示例可以參考項目的example，該模塊也是筆者貢獻的。這里我會詳細的介紹Zookeeper配置中心的接入和對接監控平臺Prometheus和Grafana。

快速開始

pom依賴

dynamic-tp-spring-boot-starter-zookeeper是集成dynamic-tp的starter，這里引入了micrometer-registry-prometheus和spring-boot-starter-actuator用于對接Prometheus。

    <dependencies>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-web</artifactId>
        </dependency>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-logging</artifactId>
        </dependency>
        <dependency>
            <groupId>io.github.lyh200</groupId>
            <artifactId>dynamic-tp-spring-boot-starter-zookeeper</artifactId>
            <version>1.0.2</version>
        </dependency>
        <dependency>
            <groupId>io.micrometer</groupId>
            <artifactId>micrometer-registry-prometheus</artifactId>
            <version>1.6.4</version>
        </dependency>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-actuator</artifactId>
        </dependency>
    </dependencies>

YML配置

server:
  port: 8888

spring:
  application:
    name: dynamic-tp-zookeeper-demo
  # 下面是接入zk配置中心的配置  
  dynamic:
    tp:
      config-type: properties # zookeeper只支持properties配置
      zookeeper:
        config-version: 1.0.0 # 配置版本號
        zk-connect-str: 127.0.0.1:2181 # zk配置中心，如果是集群用逗號分開
        root-node: /configserver/userproject # 項目節點
        node: dynamic-tp-zookeeper-demo # 配置文件節點
# 對接prometheus
management:
  metrics:
    tags:
      application: ${spring.application.name}
  endpoints:
    web:
      exposure:
        include: '*'

配置中心dynamic-tp-zookeeper-demo配置文件配置

注：Zookeeper配置中心只支持properties類型配置，配置示例如下：

spring.dynamic.tp.executors部分是對線程池的配置，該配置是數組類型，可以定義多個線程池

spring.dynamic.tp.executors[1].notifyItems部分配置是對線程池報警平臺的配置，可以配置多個報警平臺

# 開啟動態線程池
spring.dynamic.tp.enabled=true
# 打印動態線程池banner
spring.dynamic.tp.enabledBanner=true
# 開啟線程池監控指標收集
spring.dynamic.tp.enabledCollect=true
# 線程池監控指標收集類型 logging-日志文件 micrometer-采集到第三方平臺 
spring.dynamic.tp.collectorType=logging
# 采集監控數據時間間隔 5s
spring.dynamic.tp.monitorInterval=5
spring.dynamic.tp.executors[0].threadPoolName=dynamic-tp-test-1
spring.dynamic.tp.executors[0].corePoolSize=50
spring.dynamic.tp.executors[0].maximumPoolSize=50
spring.dynamic.tp.executors[0].queueCapacity=3000
spring.dynamic.tp.executors[0].queueType=VariableLinkedBlockingQueue
spring.dynamic.tp.executors[0].rejectedHandlerType=CallerRunsPolicy
spring.dynamic.tp.executors[0].keepAliveTime=50
spring.dynamic.tp.executors[0].allowCoreThreadTimeOut=false
spring.dynamic.tp.executors[0].threadNamePrefix=test1
spring.dynamic.tp.executors[0].notifyItems[0].type=capacity
spring.dynamic.tp.executors[0].notifyItems[0].enabled=false
spring.dynamic.tp.executors[0].notifyItems[0].threshold=80
spring.dynamic.tp.executors[0].notifyItems[0].platforms[0]=ding
spring.dynamic.tp.executors[0].notifyItems[0].platforms[1]=wechat
spring.dynamic.tp.executors[0].notifyItems[0].interval=120
spring.dynamic.tp.executors[0].notifyItems[1].type=change
spring.dynamic.tp.executors[0].notifyItems[1].enabled=false
spring.dynamic.tp.executors[0].notifyItems[2].type=liveness
spring.dynamic.tp.executors[0].notifyItems[2].enabled=false
spring.dynamic.tp.executors[0].notifyItems[2].threshold=80
spring.dynamic.tp.executors[0].notifyItems[3].type=reject
spring.dynamic.tp.executors[0].notifyItems[3].enabled=false
spring.dynamic.tp.executors[0].notifyItems[3].threshold=1
spring.dynamic.tp.executors[1].threadPoolName=dynamic-tp-test-2
spring.dynamic.tp.executors[1].corePoolSize=20
spring.dynamic.tp.executors[1].maximumPoolSize=30
spring.dynamic.tp.executors[1].queueCapacity=1000
spring.dynamic.tp.executors[1].queueType=VariableLinkedBlockingQueue
spring.dynamic.tp.executors[1].rejectedHandlerType=CallerRunsPolicy
spring.dynamic.tp.executors[1].keepAliveTime=50
spring.dynamic.tp.executors[1].allowCoreThreadTimeOut=false
spring.dynamic.tp.executors[1].threadNamePrefix=test2
spring.dynamic.tp.executors[1].notifyItems[0].type=capacity
spring.dynamic.tp.executors[1].notifyItems[0].enabled=false
spring.dynamic.tp.executors[1].notifyItems[0].threshold=80
spring.dynamic.tp.executors[1].notifyItems[0].platforms[0]=ding
spring.dynamic.tp.executors[1].notifyItems[0].platforms[1]=wechat
spring.dynamic.tp.executors[1].notifyItems[0].interval=120
spring.dynamic.tp.executors[1].notifyItems[1].type=change
spring.dynamic.tp.executors[1].notifyItems[1].enabled=false
spring.dynamic.tp.executors[1].notifyItems[2].type=liveness
spring.dynamic.tp.executors[1].notifyItems[2].enabled=false
spring.dynamic.tp.executors[1].notifyItems[2].threshold=80
spring.dynamic.tp.executors[1].notifyItems[3].type=reject
spring.dynamic.tp.executors[1].notifyItems[3].enabled=false
spring.dynamic.tp.executors[1].notifyItems[3].threshold=1

創建線程池

創建線程池，會注冊到dynamic-tp

@Configuration
public class ThreadPoolConfiguration {
    @Bean
    public DtpExecutor dtpExecutor() {

        return ThreadPoolCreator.createDynamicFast("dynamic-tp-test-1");
    }
    @Bean
    public ThreadPoolExecutor threadPoolExecutor() {
        return ThreadPoolBuilder.newBuilder()
                .threadPoolName("dynamic-tp-test-2")
                .corePoolSize(10)
                .maximumPoolSize(15)
                .keepAliveTime(15000)
                .timeUnit(TimeUnit.MILLISECONDS)
                .workQueue(QueueTypeEnum.SYNCHRONOUS_QUEUE.getName(), null, false)
                .buildDynamic();
    }
}

使用

初次使用不注意官網文檔的話可能會通過@Autowired的方式使用，目前版本這么使用是不正確的，因為當讀取配置文件后，配置文件生成的線程池對象就會把@Bean創建的線程池覆蓋了，所以目前版本只能根據名字從DtpRegistry獲取線程池對象了，筆者也和項目作者溝通過，項目作者也覺得通過@Autowired方式更好一些，后面版本也會優化。

@Slf4j
@RestController
@SuppressWarnings("all")
public class TestController {
    @GetMapping("/dtp-zookeeper-example/test")
    public String test() {
        new Thread(() -> {
            try {
                task();
            } catch (InterruptedException e) {
                e.printStackTrace();
            }
        }).start();
        return "success";
    }
    public void task() throws InterruptedException {
        DtpExecutor dtpExecutor1 = DtpRegistry.getExecutor("dynamic-tp-test-1");
        DtpExecutor dtpExecutor2 = DtpRegistry.getExecutor("dynamic-tp-test-2");
        for (int i = 0; i < 100; i++) {
            Thread.sleep(100);
            dtpExecutor1.execute(() -> {
                log.info("i am dynamic-tp-test-1 task");
            });
            dtpExecutor2.execute(() -> {
                log.info("i am dynamic-tp-test-2 task");
            });
        }
    }
}

監控數據和第三方平臺對接

logging方式

spring.dynamic.tp.collectorType=logging,logging方式的監控數據，采集日志文件中，文件的位置可以通過spring.dynamic.tp.logPath配置，默認 ${user.home}/logs，日志內容如下：

2022-03-07 13:48:31.585 INFO [dtp-monitor1:D.M.LOG] {"activeCount":0,"queueSize":0,"largestPoolSize":0,"poolSize":0,"rejectHandlerName":"CallerRunsPolicy","queueCapacity":0,"fair":false,"rejectCount":0,"waitTaskCount":0,"taskCount":0,"queueRemainingCapacity":0,"corePoolSize":40,"queueType":"SynchronousQueue","completedTaskCount":0,"dtpName":"dynamic-tp-test-2","maximumPoolSize":55}
2022-03-07 13:48:31.585 INFO [dtp-monitor1:D.M.LOG] {"activeCount":0,"queueSize":0,"largestPoolSize":0,"poolSize":0,"queueCapacity":2147483647,"fair":false,"rejectCount":0,"waitTaskCount":0,"taskCount":0,"queueRemainingCapacity":2147483647,"corePoolSize":10,"queueType":"TaskQueue","completedTaskCount":0,"dtpName":"tomcatWebServerTp","maximumPoolSize":200}
2022-03-07 13:48:36.590 INFO [dtp-monitor1:D.M.LOG] {"activeCount":0,"queueSize":0,"largestPoolSize":0,"poolSize":0,"rejectHandlerName":"CallerRunsPolicy","queueCapacity":1024,"fair":false,"rejectCount":0,"waitTaskCount":0,"taskCount":0,"queueRemainingCapacity":1024,"corePoolSize":50,"queueType":"VariableLinkedBlockingQueue","completedTaskCount":0,"dtpName":"dynamic-tp-test-1","maximumPoolSize":50}
2022-03-07 13:48:36.590 INFO [dtp-monitor1:D.M.LOG] {"activeCount":0,"queueSize":0,"largestPoolSize":0,"poolSize":0,"rejectHandlerName":"CallerRunsPolicy","queueCapacity":0,"fair":false,"rejectCount":0,"waitTaskCount":0,"taskCount":0,"queueRemainingCapacity":0,"corePoolSize":40,"queueType":"SynchronousQueue","completedTaskCount":0,"dtpName":"dynamic-tp-test-2","maximumPoolSize":55}
2022-03-07 13:48:36.590 INFO [dtp-monitor1:D.M.LOG] {"activeCount":0,"queueSize":0,"largestPoolSize":0,"poolSize":0,"queueCapacity":2147483647,"fair":false,"rejectCount":0,"waitTaskCount":0,"taskCount":0,"queueRemainingCapacity":2147483647,"corePoolSize":10,"queueType":"TaskQueue","completedTaskCount":0,"dtpName":"tomcatWebServerTp","maximumPoolSize":200}

MicroMeter方式

spring.dynamic.tp.collectorType=micrometer 采集數據到第三方平臺，這里使用的是Prometheus?？梢暬故拘枰?code>Grafana平臺配置，數據源選擇Prometheus，然后創建Dashboard，先要在Dashboard配置動態的參數Variables，如下圖：

配置完參數后，我們創建Panel，可以創建多個Panel，然后配置Panel的數據查詢，報警顯示等等，如下圖：

最終的Dashboard如下圖：

總結

促使我使用dynamic-tp的一個最主要的點就是它輕量級，提供了線程池監控、報警、基于配置中心修改線程池參數功能，完全滿足了我在業務中的需要，同時監控數據能夠?qū)庸粳F(xiàn)有的監控平臺（Prometheus+Grafana），并且在使用上也十分方便，我在剛接觸這個插件的時候它還不支持Zookeeper，恰好我司使用的配置中心就是Zookeeper，因為我在此基礎上把Zookeeper配置中心集成到了dynamic-tp并貢獻給社區，希望可以幫到更多的人，下一篇簡單介紹下dynamic-tp支持Zookeeper的實現細節。

到此這篇關于Java動態線程池插件dynamic-tp集成過程淺析的文章就介紹到這了,更多相關Java dynamic-tp內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

最新評論