Android中3種圖片壓縮處理方法
Android中圖片的存在形式:
1:文件形式:二進制形式存在與硬盤中。
2:流的形式:二進制形式存在與內存中。
3:Bitmap的形式
三種形式的區別:
文件形式和流的形式:對圖片體積大小并沒有影響。也就是說,如果你手機SD卡上的圖片通過流的形式讀到內存中,在內存中的大小也是原圖的大小。
注意:不是Bitmap的形式。
Bitmap的形式:圖片占用的內存會瞬間變大。
以下是代碼的形式:
/**
* 圖片壓縮的方法總結
*/
/*
* 圖片壓縮的方法01:質量壓縮方法
*/
private Bitmap compressImage(Bitmap beforBitmap) {
// 可以捕獲內存緩沖區的數據,轉換成字節數組。
ByteArrayOutputStream bos = new ByteArrayOutputStream();
if (beforBitmap != null) {
// 第一個參數:圖片壓縮的格式;第二個參數:壓縮的比率;第三個參數:壓縮的數據存放到bos中
beforBitmap.compress(CompressFormat.JPEG, 100, bos);
int options = 100;
// 循環判斷壓縮后的圖片是否是大于100kb,如果大于,就繼續壓縮,否則就不壓縮
while (bos.toByteArray().length / 1024 > 100) {
bos.reset();// 置為空
// 壓縮options%
beforBitmap.compress(CompressFormat.JPEG, options, bos);
// 每次都減少10
options -= 10;
}
// 從bos中將數據讀出來 存放到ByteArrayInputStream中
ByteArrayInputStream bis = new ByteArrayInputStream(
bos.toByteArray());
// 將數據轉換成圖片
Bitmap afterBitmap = BitmapFactory.decodeStream(bis);
return afterBitmap;
}
return null;
}
/*
* 圖片壓縮方法02:獲得縮略圖
*/
public Bitmap getThumbnail(int id) {
// 獲得原圖
Bitmap beforeBitmap = BitmapFactory.decodeResource(
mContext.getResources(), id);
// 寬
int w = mContext.getResources()
.getDimensionPixelOffset(R.dimen.image_w);
// 高
int h = mContext.getResources().getDimensionPixelSize(R.dimen.image_h);
// 獲得縮略圖
Bitmap afterBitmap = ThumbnailUtils
.extractThumbnail(beforeBitmap, w, h);
return afterBitmap;
}
/**
* 圖片壓縮03
*
* @param id
* 要操作的圖片的大小
* @param newWidth
* 圖片指定的寬度
* @param newHeight
* 圖片指定的高度
* @return
*/
public Bitmap compressBitmap(int id, double newWidth, double newHeight) {
// 獲得原圖
Bitmap beforeBitmap = BitmapFactory.decodeResource(
mContext.getResources(), id);
// 圖片原有的寬度和高度
float beforeWidth = beforeBitmap.getWidth();
float beforeHeight = beforeBitmap.getHeight();
// 計算寬高縮放率
float scaleWidth = 0;
float scaleHeight = 0;
if (beforeWidth > beforeHeight) {
scaleWidth = ((float) newWidth) / beforeWidth;
scaleHeight = ((float) newHeight) / beforeHeight;
} else {
scaleWidth = ((float) newWidth) / beforeHeight;
scaleHeight = ((float) newHeight) / beforeWidth;
}
// 矩陣對象
Matrix matrix = new Matrix();
// 縮放圖片動作 縮放比例
matrix.postScale(scaleWidth, scaleHeight);
// 創建一個新的Bitmap 從原始圖像剪切圖像
Bitmap afterBitmap = Bitmap.createBitmap(beforeBitmap, 0, 0,
(int) beforeWidth, (int) beforeHeight, matrix, true);
return afterBitmap;
}
相關文章
android 左右滑動+索引圖標實現方法與代碼
使用Gallery和ImageView實現android左右滑動+索引圖標效果,接下來詳細介紹,有需要的朋友可以參考下2012-12-12
Android開發基礎簡化Toast調用方法詳解
這篇文章主要為大家介紹了Android開發基礎簡化Toast調用方法的相關資料,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-02-02
Android Studio下載、安裝和配置+SDK+tools下載(無敵超級詳細版本)
這篇文章主要介紹了Android Studio下載、安裝和配置+SDK+tools下載(無敵超級詳細版本),文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2020-11-11
Android實現多次閃退清除數據
這篇文章主要介紹了Android實現多次閃退清除數據的相關資料,感興趣的小伙伴們可以參考一下2016-04-04
Android學習筆記-保存數據到SQL數據庫中(Saving Data in SQL Databases)
這篇文章主要介紹了Android學習筆記-保存數據到SQL數據庫中的(Saving Data in SQL Databases)2014-10-10
android byte[] 和short[]轉換的方法代碼
這篇文章主要介紹了android byte[] 和short[]轉換的方法代碼,有需要的朋友可以參考一下2014-01-01
Android自定義ViewGroup實現朋友圈九宮格控件
在我們的實際應用中,經常需要用到自定義控件,比如自定義圓形頭像,自定義計步器等等,這篇文章主要給大家介紹了關于Android自定義ViewGroup實現朋友圈九宮格控件的相關資料,需要的朋友可以參考下2021-07-07
Android仿拉手網團購App我的收藏界面實例代碼
這篇文章主要介紹了Android仿拉手團購網App我的收藏界面實例代碼,需要的朋友可以參考下2017-05-05
Android開發Jetpack組件WorkManager用例詳解
這篇文章主要為大家介紹了Android開發Jetpack組件WorkManager的使用案例詳解,有需要的朋友可以借鑒參考下,希望能夠有所幫助2022-02-02

