介紹一個簡單的JavaScript類框架
在寫work-in-progress JavaScript book一書時,對于javascript繼承體系,我花費了相當?shù)臅r間,并在該過程中研究了各種不同的模擬經典類繼承的方案。這些技術方案中,我最為推崇的是base2與Prototype的實現。
從這些方案中,應該能提煉出一個具有其思想內涵的框架,該框架須具有簡單、可重用、易于理解并無依賴等特點,其中簡單性與可用性是重點。以下是使用示例:
var Person = Class. extend ( {
init: function (isDancing ) {
this. dancing = isDancing;
},
dance: function ( ) {
return this. dancing;
}
} );
var Ninja = Person.extend({
init: function(){
this._super( false );
},
dance: function(){
// Call the inherited version of dance()
return this._super();
},
swingSword: function(){
return true;
}
});
var p = new Person(true);
p.dance(); // => true
var n = new Ninja();
n.dance(); // => false
n.swingSword(); // => true
// Should all be true
p instanceof Person && p instanceof Class &&
n instanceof Ninja && n instanceof Person && n instanceof Class
有幾點需要留意:
- 構造函數須簡單(通過init函數來實現),
- 新定義的類比須繼承于已有的類,
- 所有的‘類'都繼承于始祖類:Class,因此如果要創建一個全新的類,該類必須為Class的子類,
- 最具挑戰的一點:父類的被覆寫方法必須能訪問到(通過配置上下文環境)。
- 在上面的示例中,你能發現通過this._super()來調用Person父類的init()和dance()方法。
對結果相當滿意:使類的定義結構化,保持單一繼承,并且能夠調用超類方法。
簡單的類創建與繼承
下面為其實現(便于閱讀并有注釋),大概25行左右。歡迎并感謝提出建議。
/* Simple JavaScript Inheritance
* By John Resig http://ejohn.org/
* MIT Licensed.
*/
// Inspired by base2 and Prototype
( function ( ) {
var initializing = false, fnTest = /xyz/.test(function(){xyz;}) ? /\b_super\b/ : /.*/;
// The base Class implementation (does nothing)
this.Class = function(){};
// Create a new Class that inherits from this class
Class.extend = function(prop) {
var _super = this.prototype;
// Instantiate a base class (but only create the instance,
// don't run the init constructor)
initializing = true;
var prototype = new this();
initializing = false;
// Copy the properties over onto the new prototype
for (var name in prop) {
// Check if we're overwriting an existing function
prototype[name] = typeof prop[name] == "function" &&
typeof _super[name] == "function" && fnTest.test(prop[name]) ?
(function(name, fn){
return function() {
var tmp = this._super;
// Add a new ._super() method that is the same method
// but on the super-class
this._super = _super[name];
// The method only need to be bound temporarily, so we
// remove it when we're done executing
var ret = fn.apply(this, arguments);
this._super = tmp;
return ret;
};
})(name, prop[name]) :
prop[name];
}
// The dummy class constructor
function Class() {
// All construction is actually done in the init method
if ( !initializing && this.init )
this.init.apply(this, arguments);
}
// Populate our constructed prototype object
Class.prototype = prototype;
// Enforce the constructor to be what we expect
Class.prototype.constructor = Class;
// And make this class extendable
Class.extend = arguments.callee;
return Class;
};
})();
其中 “初始化(initializing/don't call init)”與“創建_super方法”最為棘手。接下來,我會對此做簡要的介紹,使得大家對其實現機制能更好的理解。
初始化
為了說明函數原型式的繼承方式,首先來看傳統的實現過程,即將子類的prototype屬性指向父類的一個實例。如下所示:
function Person ( ) { }
function Ninja ( ) { }
Ninja. prototype = new Person ( );
// Allows for instanceof to work:
(new Ninja()) instanceof Person
然而,這里具有挑戰性的一點,便是我們只想要得到‘是否實例(instatnceOf)'的效果,而不需要實例一個 Person并調用其構造函數所帶來的后果。為防止這一點,在代碼中設置一個bool參數initializing,只有在實例化父類并將其配置到子類的prototype屬性時, 其值才為true。這樣處理的目的是區分開真正的實例化與設計繼承時這兩種調用構造函數之間的區別,進而在真正實例化時調用init方法:
if ( !initializing ) this.init.apply(this, arguments);
值得特別注意的是,因為在init函數中可能會運行相當費資源的代碼(如連接服務器,創建DOM元素等,誰也無法預測),所以做出區分是完全必要的。
超類方法(Super Method)
當使用繼承時,最常見的需求便是子類能訪問超類被覆寫的方法。在該實現下,最終的方案便是提供一個臨時方法(._super),該方法指向超類方法,并且只能在子類方法中訪問。
var Person = Class. extend ( {
init: function (isDancing ) {
this. dancing = isDancing;
}
} );
var Ninja = Person.extend({
init: function(){
this._super( false );
}
});
var p = new Person(true);
p.dancing; // => true
var n = new Ninja();
n.dancing; // => false
實現這一功能需要幾步處理。首先,我們使用extend來合并基本的Person實例(類實例,上面我們提到過其構造過程)與字面對象(Person.extend()的函數參數)。在合并過程中,做了簡單的檢查:首先檢查將被合并的的屬性是否為函數,如為函數,然后檢查將被覆寫的超類屬性是否也為函數?如果這兩個檢查都為true,則需要為該屬性準備_super方法。
注意,在這里創建了一個匿名閉包(返回的是函數對象)來封裝增加的super方法?;诰S護運行環境的需要,我們應該將舊的this._super(不管其是否存在)保存起來以備函數運行后重置,這有助于在有相同名稱(不想偶然丟失對象指針)的情況下發生不可預知的問題。
然后,創建新的_super方法,該方法對象僅指向超類中被覆寫的方法。謝天謝地,不用對_super做任何改動或變更作用域,因為函數的執行環境會隨著函數調用對象自動變更(指針this會指向超類).
最后,調用字面量對象的方法,方法執行中可能會使用this._super(),方法執行后,將屬性_super重置回其原來狀態,之后return退出函數。
以上可以有許多種方案能達到相同的效果(我之前曾見過將super綁定到其自身,然后用arguments.callee訪問),但是感覺還是這種方法最能能體現可用性與簡潔性的特點。
在我已完成的多個基于javascript原型的工作中,只有這個類繼承實現方案是我發表出來與大家分享的。我認為,簡潔的代碼(易于學習,易于繼承,更少下載)更需要提出來讓大家探討,因此,對于學習javascript類構造與繼承的人們來說,這套實現方案是一個好的開始。
相關文章
在JavaScript應用中使用RequireJS來實現延遲加載
這篇文章主要介紹了在JavaScript應用中使用RequireJS來實現延遲加載,JavaScript是一款人氣JS庫,需要的朋友可以參考下2015-07-07
JavaScript中的prototype.bind()方法介紹
在JavaScript中,我們經常用到函數綁定,而當你需要在另一個函數中保持this上下文時,使用Function.prototype.bind()會很方便2014-04-04
selenium 與 chrome 進行qq登錄并發郵件操作實例詳解
這篇文章主要介紹了selenium 與 chrome 進行qq登錄并發郵件操作實例詳解的相關資料,需要的朋友可以參考下2017-04-04
javascript replace()第二個參數為函數時的參數用法
replace()函數具有替換功能,它可以具有兩個參數,第一個參數可以是要被替換的字符串或者匹配要被替換字符串的正則表達式,第二個參數可以是替換文本或者一個函數,下面看一下關于replace()函數的幾個代碼實例2016-12-12
js中一維數組和二位數組中的幾個問題示例說明
這篇文章主要介紹了js中一維數組和二位數組中的幾個問題,并給出對應的解決方法,需要的朋友可以參考下2014-07-07

