/* 
 雙向循環鏈表 
*/
#include <iostream>
using namespace std;
//結構體構造鏈表的指針域和數據域
struct ChainNode
{
 int data; //節點數據 
 ChainNode *left; //節點的前驅指針
 ChainNode *right; //節點的后繼指針 
};
////////////創建n個雙向循環鏈表 并返回鏈表頭指針///////// 
ChainNode* CreateNode(int n)
{
 ChainNode *head = NULL; //鏈表頭節點
 ChainNode *pCur=NULL,*pNew=NULL; //當前節點，新建節點
 //初始化頭結點的前驅和后繼節點都為NULL 
 if (n<1) //沒有節點 返回頭節點 
 {
  return head; 
 } 
 //創建頭節點并將器左右指針指向空 
 head = new ChainNode; 
 head->left = NULL;
 head->right = NULL; 
 head->data = 0;
 pCur = head;
 //為防止指針互指帶來的混亂，用pCur節點保存了頭節點 也表示當前指針移動到了頭指針 
 //創建n個節點 并連接成鏈表 
 for (int i=0; i<n; i++)
 {
  pNew = new ChainNode; //創建一個新節點
  cout<<"請輸入數據：";
  cin>>pNew->data;
  pCur->right = pNew; //頭指針的右指針指向新建節點 
  pNew->left = pCur; //新建節點的左指針執行頭節點 
  pNew->right = NULL; //用于最后和頭指針進行交換 
  pCur = pNew; //指針往下移動 
 } 
 //最后將頭指針的左指針指向最后一個節點，
 //最后一個節點的有指針指向頭指針，構成循環 
 head->left = pCur; 
 pCur->right = head;
 return head; 
}
//////////////輸出鏈表頭節點/////////////////////// 
void OutList(ChainNode *head) //參數為頭指針 從頭指針開始 
{
  cout<<"鏈表元素輸出如下："<<endl;
  ChainNode *pCur = head->right;
  //重第一個節點開始輸出 
  //沒有指向空節點，則鏈表沒結束 輸出鏈表元素 
  while (pCur->right != head)  
  {
   cout<<pCur->data<<" ";
   pCur = pCur->right;
   //當前節點指向下一個節點 可以遍歷鏈表 
  } 
  cout<<pCur->data<<endl;
  //輸入最后一個元素，它的右指針執行head 
}
///////在雙向循環鏈表后添加n個節點//////
ChainNode* AddNode(ChainNode* head, int n)
{
 ChainNode *pNew,*pCur;
 //新添加節點和當前節點
 pCur = head; 
 //移動到最節點
 while (pCur->right != head) 
 {
   pCur = pCur->right;
   //當前節點往下移動 一直移到最后一個節點 
 }
 //新添加n個節點并插入鏈表
 for (int i=0; i<n; i++)
 {
  pNew = new ChainNode;
  cout<<"輸入要添加的節點元素：";
  cin>>pNew->data;
  pCur->right = pNew; //頭指針的右指針指向新建節點 
  pNew->left = pCur; //新建節點的左指針執行頭節點 
  pNew->right = NULL; //用于最后和頭指針進行交換 
  pCur = pNew; //指針往下移動 
 } 
 //最后將頭指針的左指針指向最后一個節點，
 //最后一個節點的有指針指向頭指針，構成循環 
 head->left = pCur; 
 pCur->right = head;
 return head; 
} 
/////在雙向循環鏈表中刪除一個節點/////// 
ChainNode* DeleteNode(ChainNode* head, unsigned num)
//刪除第num個節點
{
 ChainNode *pNew,*pCur,*temp;
 //新添加節點和當前節點 ,臨時交換節點 
 pCur = head; 
 int ncount = 0; 
 //移動到第num-1個節點
 while (1)
 {
   ncount++;
   pCur = pCur->right; //當前節點往下移動 
   if (num == ncount)
   {
    break; //此時pCur還是指向了第num個節點 
   } 
 }
 //當前節點的前一個節點的右指針 指向 當前節點的下一個節點
 //當前節點的下一個節點的左指針 指向 當前節點的上一個節點 構成連接
 //最后 刪除當前節點 
 (pCur->left)->right = pCur->right;
 (pCur->right)->left = pCur->left;
 delete pCur;
 return head; 
}
int main()
{
 int num;
 //創建num個節點并顯示 
 cout<<"輸入要?jiǎng)?chuàng)建的鏈表節點個數:";
 cin>>num;
 ChainNode *head = CreateNode(num);
 OutList(head); 
 //往鏈表后添加n個節點
 int addnum;
 cout<<"輸入要添加的節點個數:";
 cin>>addnum; 
 AddNode(head, addnum);
 OutList(head); 
 //刪除鏈表的第del個元素
 int del;
 cout<<"輸入要?jiǎng)h除的第幾個位置的節點:";
 cin>>del;
 DeleteNode (head, del);
 OutList(head);
 system("pause");
 return 0;
}