快捷導航

使用C#實現基于TCP和UDP協議的網絡通信程序的基本示例

更新時間：2016年04月09日 11:11:05 作者：hzy3774

這篇文章主要介紹了使用C#實現基于TCP和UDP協議的網絡通信程序的示例,文中分別編寫了基本的服務器端和客戶端,代碼十分簡單,需要的朋友可以參考下

C#中使用TCP通信

TCP通信需要通信雙方都在線，所以需要先啟動服務端進行監聽，客戶端才能獲得連接，服務端代碼：

static void Main(string[] args) 
    { 
      TcpClient client = null; 
      NetworkStream stream = null; 
      byte[] buffer = null; 
      string receiveString = null; 
 
      IPAddress localIP = IPAddress.Parse("127.0.0.1"); 
      int localPort = 11000; 
      TcpListener listener = new TcpListener(localIP, localPort);//用本地IP和端口實例化Listener 
      listener.Start();//開始監聽 
      while (true) 
      { 
        client = listener.AcceptTcpClient();//接受一個Client 
        buffer = new byte[client.ReceiveBufferSize]; 
        stream = client.GetStream();//獲取網絡流 
        stream.Read(buffer, 0, buffer.Length);//讀取網絡流中的數據 
        stream.Close();//關閉流 
        client.Close();//關閉Client 
 
        receiveString = Encoding.Default.GetString(buffer).Trim('\0');//轉換成字符串 
        Console.WriteLine(receiveString); 
      } 
    }

只有服務端開啟監聽后，客戶端才能正確連接，所以服務端要一直開啟監聽，客戶端每次發送數據，都要首先與服務端建立連接，連接建立完成后才進行數據發送?？蛻舳舜a：

static void Main(string[] args) 
    { 
      string sendString = null;//要發送的字符串 
      byte[] sendData = null;//要發送的字節數組 
      TcpClient client = null;//TcpClient實例 
      NetworkStream stream = null;//網絡流 
 
      IPAddress remoteIP = IPAddress.Parse("127.0.0.1");//遠程主機IP 
      int remotePort = 11000;//遠程主機端口 
 
      while (true)//死循環 
      { 
        sendString = Console.ReadLine();//獲取要發送的字符串 
        sendData = Encoding.Default.GetBytes(sendString);//獲取要發送的字節數組 
        client = new TcpClient();//實例化TcpClient 
        try 
        { 
          client.Connect(remoteIP, remotePort);//連接遠程主機 
        } 
        catch (System.Exception ex) 
        { 
          Console.WriteLine("連接超時，服務器沒有響應！");//連接失敗 
          Console.ReadKey(); 
          return; 
        } 
        stream = client.GetStream();//獲取網絡流 
        stream.Write(sendData, 0, sendData.Length);//將數據寫入網絡流 
        stream.Close();//關閉網絡流 
        client.Close();//關閉客戶端 
      } 
    }

201649111019897.jpg (456×186)

C#中使用UDP通信
UDP通信是無連接通信，客戶端在發送數據前無需與服務器端建立連接，即使服務器端不在線也可以發送，但是不能保證服務器端可以收到數據。
服務器端代碼：

static void Main(string[] args) 
    { 
      UdpClient client = null; 
      string receiveString = null; 
      byte[] receiveData = null; 
      //實例化一個遠程端點，IP和端口可以隨意指定，等調用client.Receive(ref remotePoint)時會將該端點改成真正發送端端點 
      IPEndPoint remotePoint = new IPEndPoint(IPAddress.Any, 0); 
 
      while (true) 
      { 
        client = new UdpClient(11000); 
        receiveData = client.Receive(ref remotePoint);//接收數據 
        receiveString = Encoding.Default.GetString(receiveData); 
        Console.WriteLine(receiveString); 
        client.Close();//關閉連接 
      } 
    }

客戶端代碼：

static void Main(string[] args) 
    { 
      string sendString = null;//要發送的字符串 
      byte[] sendData = null;//要發送的字節數組 
      UdpClient client = null; 
 
      IPAddress remoteIP = IPAddress.Parse("127.0.0.1"); 
      int remotePort = 11000; 
      IPEndPoint remotePoint = new IPEndPoint(remoteIP, remotePort);//實例化一個遠程端點 
 
      while (true) 
      { 
        sendString = Console.ReadLine(); 
        sendData = Encoding.Default.GetBytes(sendString); 
 
        client = new UdpClient(); 
        client.Send(sendData, sendData.Length, remotePoint);//將數據發送到遠程端點 
        client.Close();//關閉連接 
      } 
    }

201649111055659.jpg (363×174)