//申請用戶語音識別權限
 [SFSpeechRecognizer requestAuthorization:^(SFSpeechRecognizerAuthorizationStatus status) { 
 }];

typedef NS_ENUM(NSInteger, SFSpeechRecognizerAuthorizationStatus) {
 //結果未知 用戶尚未進行選擇
 SFSpeechRecognizerAuthorizationStatusNotDetermined,
 //用戶拒絕授權語音識別
 SFSpeechRecognizerAuthorizationStatusDenied,
 //設備不支持語音識別功能
 SFSpeechRecognizerAuthorizationStatusRestricted,
 //用戶授權語音識別
 SFSpeechRecognizerAuthorizationStatusAuthorized,
};

 //創建語音識別操作類對象
 SFSpeechRecognizer * rec = [[SFSpeechRecognizer alloc]init];
 //通過一個音頻路徑創建音頻識別請求
 SFSpeechRecognitionRequest * request = [[SFSpeechURLRecognitionRequest alloc]initWithURL:[[NSBundle mainBundle] URLForResource:@"7011" withExtension:@"m4a"]];
 //進行請求
 [rec recognitionTaskWithRequest:request resultHandler:^(SFSpeechRecognitionResult * _Nullable result, NSError * _Nullable error) {
  //打印語音識別的結果字符串
  NSLog(@"%@",result.bestTranscription.formattedString);
 }];

//獲取當前用戶權限狀態
+ (SFSpeechRecognizerAuthorizationStatus)authorizationStatus;
//申請語音識別用戶權限
+ (void)requestAuthorization:(void(^)(SFSpeechRecognizerAuthorizationStatus status))handler;
//獲取所支持的所有語言環境
+ (NSSet<NSLocale *> *)supportedLocales;
//初始化方法 需要注意 這個初始化方法將默認以設備當前的語言環境作為語音識別的語言環境
- (nullable instancetype)init;
//初始化方法 設置一個特定的語言環境
- (nullable instancetype)initWithLocale:(NSLocale *)locale NS_DESIGNATED_INITIALIZER;
//語音識別是否可用
@property (nonatomic, readonly, getter=isAvailable) BOOL available;
//語音識別操作類協議代理
@property (nonatomic, weak) id<SFSpeechRecognizerDelegate> delegate;
//設置語音識別的配置參數 需要注意 在每個語音識別請求中也有這樣一個屬性 這里設置將作為默認值
//如果SFSpeechRecognitionRequest對象中也進行了設置 則會覆蓋這里的值
/*
typedef NS_ENUM(NSInteger, SFSpeechRecognitionTaskHint) {
 SFSpeechRecognitionTaskHintUnspecified = 0,  // 無定義
 SFSpeechRecognitionTaskHintDictation = 1,  // 正常的聽寫風格
 SFSpeechRecognitionTaskHintSearch = 2,   // 搜索風格
 SFSpeechRecognitionTaskHintConfirmation = 3, // 短語風格
};
*/
@property (nonatomic) SFSpeechRecognitionTaskHint defaultTaskHint;
//使用回調Block的方式進行語音識別請求 請求結果會在Block中傳入
- (SFSpeechRecognitionTask *)recognitionTaskWithRequest:(SFSpeechRecognitionRequest *)request
           resultHandler:(void (^)(SFSpeechRecognitionResult * __nullable result, NSError * __nullable error))resultHandler;
//使用代理回調的方式進行語音識別請求
- (SFSpeechRecognitionTask *)recognitionTaskWithRequest:(SFSpeechRecognitionRequest *)request
            delegate:(id <SFSpeechRecognitionTaskDelegate>)delegate;
//設置請求所占用的任務隊列
@property (nonatomic, strong) NSOperationQueue *queue;

//當語音識別操作可用性發生改變時會被調用
- (void)speechRecognizer:(SFSpeechRecognizer *)speechRecognizer availabilityDidChange:(BOOL)available;

//當開始檢測音頻源中的語音時首先調用此方法
- (void)speechRecognitionDidDetectSpeech:(SFSpeechRecognitionTask *)task;
//當識別出一條可用的信息后 會調用
/*
需要注意，apple的語音識別服務會根據提供的音頻源識別出多個可能的結果 每有一條結果可用 都會調用此方法
*/
- (void)speechRecognitionTask:(SFSpeechRecognitionTask *)task didHypothesizeTranscription:(SFTranscription *)transcription;
//當識別完成所有可用的結果后調用
- (void)speechRecognitionTask:(SFSpeechRecognitionTask *)task didFinishRecognition:(SFSpeechRecognitionResult *)recognitionResult;
//當不再接受音頻輸入時調用 即開始處理語音識別任務時調用
- (void)speechRecognitionTaskFinishedReadingAudio:(SFSpeechRecognitionTask *)task;
//當語音識別任務被取消時調用
- (void)speechRecognitionTaskWasCancelled:(SFSpeechRecognitionTask *)task;
//語音識別任務完成時被調用
- (void)speechRecognitionTask:(SFSpeechRecognitionTask *)task didFinishSuccessfully:(BOOL)successfully;

//此任務的當前狀態
/*
typedef NS_ENUM(NSInteger, SFSpeechRecognitionTaskState) {
 SFSpeechRecognitionTaskStateStarting = 0,  // 任務開始
 SFSpeechRecognitionTaskStateRunning = 1,  // 任務正在運行
 SFSpeechRecognitionTaskStateFinishing = 2,  // 不在進行音頻讀入 即將返回識別結果
 SFSpeechRecognitionTaskStateCanceling = 3,  // 任務取消
 SFSpeechRecognitionTaskStateCompleted = 4,  // 所有結果返回完成
};
*/
@property (nonatomic, readonly) SFSpeechRecognitionTaskState state;
//音頻輸入是否完成
@property (nonatomic, readonly, getter=isFinishing) BOOL finishing;
//手動完成音頻輸入 不再接收音頻
- (void)finish;
//任務是否被取消
@property (nonatomic, readonly, getter=isCancelled) BOOL cancelled;
//手動取消任務
- (void)cancel;

@interface SFSpeechAudioBufferRecognitionRequest : SFSpeechRecognitionRequest

@property (nonatomic, readonly) AVAudioFormat *nativeAudioFormat;
//拼接音頻流
- (void)appendAudioPCMBuffer:(AVAudioPCMBuffer *)audioPCMBuffer;
- (void)appendAudioSampleBuffer:(CMSampleBufferRef)sampleBuffer;
//完成輸入
- (void)endAudio;

@end

//識別到的多套語音轉換信息數組 其會按照準確度進行排序
@property (nonatomic, readonly, copy) NSArray<SFTranscription *> *transcriptions;
//準確性最高的識別實例
@property (nonatomic, readonly, copy) SFTranscription *bestTranscription;
//是否已經完成 如果YES 則所有所有識別信息都已經獲取完成
@property (nonatomic, readonly, getter=isFinal) BOOL final;

//完整的語音識別準換后的文本信息字符串
@property (nonatomic, readonly, copy) NSString *formattedString;
//語音識別節點數組
@property (nonatomic, readonly, copy) NSArray<SFTranscriptionSegment *> *segments;

//當前節點識別后的文本信息
@property (nonatomic, readonly, copy) NSString *substring;
//當前節點識別后的文本信息在整體識別語句中的位置
@property (nonatomic, readonly) NSRange substringRange;
//當前節點的音頻時間戳
@property (nonatomic, readonly) NSTimeInterval timestamp;
//當前節點音頻的持續時間
@property (nonatomic, readonly) NSTimeInterval duration;
//可信度/準確度 0-1之間
@property (nonatomic, readonly) float confidence;
//關于此節點的其他可能的識別結果 
@property (nonatomic, readonly) NSArray<NSString *> *alternativeSubstrings;