Golang標準庫binary詳解
更新時間：2023年05月20日 08:50:34 作者：CoreDump丶
這篇文章主要介紹了Golang標準庫binary的相關資料,本文通過示例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下
Golang標準庫binary
binary包實現了數字和字節序列之間的簡單轉換。
1、ByteOrder
ByteOrder指定了如何將一個字節序列轉換為16、32或64位的無符號整數：
type ByteOrder interface {
Uint16([]byte) uint16
Uint32([]byte) uint32
Uint64([]byte) uint64
PutUint16([]byte, uint16)
PutUint32([]byte, uint32)
PutUint64([]byte, uint64)
String() string
}ByteOrder是一個接口，在binary中有兩個實現了該接口的結構體，分別是littleEndian和bigEndian，也就是小端和大端。大端小端指的是數據如何存儲在內存中，比如：將低位字節存儲在低地址空間中、高位字節存儲在高地址空間中就是小端字節序；相反，將低位字節存儲在高地址空間中、高位字節存儲在低地址空間中就是大端字節序。
例如：十六進制數0X12345678以小端和大端字節序分別在內存中的存儲方式如下：
littleEndian：
littleEndian在其它包中是無法創建的，但是在binary中已經創建了一個名為LittleEndian的該結構體，我們可以直接使用。
var LittleEndian littleEndian
type littleEndian struct{}
func (littleEndian) Uint16(b []byte) uint16 {
_ = b[1] // 編譯器的邊界檢測提示
return uint16(b[0]) | uint16(b[1])<<8
}
func (littleEndian) PutUint16(b []byte, v uint16) {
_ = b[1] // early bounds check to guarantee safety of writes below
b[0] = byte(v)
b[1] = byte(v >> 8)
}
func (littleEndian) Uint32(b []byte) uint32 {
_ = b[3] // bounds check hint to compiler; see golang.org/issue/14808
return uint32(b[0]) | uint32(b[1])<<8 | uint32(b[2])<<16 | uint32(b[3])<<24
}
func (littleEndian) PutUint32(b []byte, v uint32) {
_ = b[3] // early bounds check to guarantee safety of writes below
b[0] = byte(v)
b[1] = byte(v >> 8)
b[2] = byte(v >> 16)
b[3] = byte(v >> 24)
}
func (littleEndian) Uint64(b []byte) uint64 {
_ = b[7] // bounds check hint to compiler; see golang.org/issue/14808
return uint64(b[0]) | uint64(b[1])<<8 | uint64(b[2])<<16 | uint64(b[3])<<24 |
uint64(b[4])<<32 | uint64(b[5])<<40 | uint64(b[6])<<48 | uint64(b[7])<<56
}
func (littleEndian) PutUint64(b []byte, v uint64) {
_ = b[7] // early bounds check to guarantee safety of writes below
b[0] = byte(v)
b[1] = byte(v >> 8)
b[2] = byte(v >> 16)
b[3] = byte(v >> 24)
b[4] = byte(v >> 32)
b[5] = byte(v >> 40)
b[6] = byte(v >> 48)
b[7] = byte(v >> 56)
}
func (littleEndian) String() string { return "LittleEndian" }
func (littleEndian) GoString() string { return "binary.LittleEndian" }在上面定義的方法也比較簡單，就是字節序列與無符號數之間的轉換。例如Uint16這個方法，在這里是小端字節序，因此低字節存儲在低地址空間中，隨著切片的索引的增大，地址空間也是增大的，所以b[1]所在空間是高地址，因此將b[1]左移八位后與b[0]位與就可以得到uint16類型的數據了。
bigEndian：
大端與小端相反：
var BigEndian bigEndian
type bigEndian struct{}
func (bigEndian) Uint16(b []byte) uint16 {
_ = b[1] // bounds check hint to compiler; see golang.org/issue/14808
return uint16(b[1]) | uint16(b[0])<<8
}
func (bigEndian) PutUint16(b []byte, v uint16) {
_ = b[1] // early bounds check to guarantee safety of writes below
b[0] = byte(v >> 8)
b[1] = byte(v)
}
func (bigEndian) Uint32(b []byte) uint32 {
_ = b[3] // bounds check hint to compiler; see golang.org/issue/14808
return uint32(b[3]) | uint32(b[2])<<8 | uint32(b[1])<<16 | uint32(b[0])<<24
}
func (bigEndian) PutUint32(b []byte, v uint32) {
_ = b[3] // early bounds check to guarantee safety of writes below
b[0] = byte(v >> 24)
b[1] = byte(v >> 16)
b[2] = byte(v >> 8)
b[3] = byte(v)
}
func (bigEndian) Uint64(b []byte) uint64 {
_ = b[7] // bounds check hint to compiler; see golang.org/issue/14808
return uint64(b[7]) | uint64(b[6])<<8 | uint64(b[5])<<16 | uint64(b[4])<<24 |
uint64(b[3])<<32 | uint64(b[2])<<40 | uint64(b[1])<<48 | uint64(b[0])<<56
}
func (bigEndian) PutUint64(b []byte, v uint64) {
_ = b[7] // early bounds check to guarantee safety of writes below
b[0] = byte(v >> 56)
b[1] = byte(v >> 48)
b[2] = byte(v >> 40)
b[3] = byte(v >> 32)
b[4] = byte(v >> 24)
b[5] = byte(v >> 16)
b[6] = byte(v >> 8)
b[7] = byte(v)
}
func (bigEndian) String() string { return "BigEndian" }
func (bigEndian) GoString() string { return "binary.BigEndian" }2、binary.Read
Read方法從一個reader中讀取數據到data中，data必須是一個指針或一個固定大小的值或切片：
該方法也可以將reader中讀取的數據賦值給結構體的各個字段中。
func Read(r io.Reader, order ByteOrder, data interface{}) error {
// Fast path for basic types and slices.
if n := intDataSize(data); n != 0 {
bs := make([]byte, n)
if _, err := io.ReadFull(r, bs); err != nil {
return err
}
switch data := data.(type) {
case *bool:
*data = bs[0] != 0
case *int8:
*data = int8(bs[0])
case *uint8:
*data = bs[0]
case *int16:
*data = int16(order.Uint16(bs))
case *uint16:
*data = order.Uint16(bs)
case *int32:
*data = int32(order.Uint32(bs))
case *uint32:
*data = order.Uint32(bs)
case *int64:
*data = int64(order.Uint64(bs))
case *uint64:
*data = order.Uint64(bs)
case *float32:
*data = math.Float32frombits(order.Uint32(bs))
case *float64:
*data = math.Float64frombits(order.Uint64(bs))
case []bool:
for i, x := range bs { // Easier to loop over the input for 8-bit values.
data[i] = x != 0
}
case []int8:
for i, x := range bs {
data[i] = int8(x)
}
case []uint8:
copy(data, bs)
case []int16:
for i := range data {
data[i] = int16(order.Uint16(bs[2*i:]))
}
case []uint16:
for i := range data {
data[i] = order.Uint16(bs[2*i:])
}
case []int32:
for i := range data {
data[i] = int32(order.Uint32(bs[4*i:]))
}
case []uint32:
for i := range data {
data[i] = order.Uint32(bs[4*i:])
}
case []int64:
for i := range data {
data[i] = int64(order.Uint64(bs[8*i:]))
}
case []uint64:
for i := range data {
data[i] = order.Uint64(bs[8*i:])
}
case []float32:
for i := range data {
data[i] = math.Float32frombits(order.Uint32(bs[4*i:]))
}
case []float64:
for i := range data {
data[i] = math.Float64frombits(order.Uint64(bs[8*i:]))
}
default:
n = 0 // fast path doesn't apply
}
if n != 0 {
return nil
}
}
// Fallback to reflect-based decoding.
v := reflect.ValueOf(data)
size := -1
switch v.Kind() {
case reflect.Ptr:
v = v.Elem()
size = dataSize(v)
case reflect.Slice:
size = dataSize(v)
}
if size < 0 {
return errors.New("binary.Read: invalid type " + reflect.TypeOf(data).String())
}
d := &decoder{order: order, buf: make([]byte, size)}
if _, err := io.ReadFull(r, d.buf); err != nil {
return err
}
d.value(v)
return nil
}3、binary.Write
Write方法將數據的二進制寫入一個Writer中，data必須為一個固定值的值或者切片或指向該類數據的一個指針：
func Write(w io.Writer, order ByteOrder, data interface{}) error {
// Fast path for basic types and slices.
if n := intDataSize(data); n != 0 {
bs := make([]byte, n)
switch v := data.(type) {
case *bool:
if *v {
bs[0] = 1
} else {
bs[0] = 0
}
case bool:
if v {
bs[0] = 1
} else {
bs[0] = 0
}
case []bool:
for i, x := range v {
if x {
bs[i] = 1
} else {
bs[i] = 0
}
}
case *int8:
bs[0] = byte(*v)
case int8:
bs[0] = byte(v)
case []int8:
for i, x := range v {
bs[i] = byte(x)
}
case *uint8:
bs[0] = *v
case uint8:
bs[0] = v
case []uint8:
bs = v
case *int16:
order.PutUint16(bs, uint16(*v))
case int16:
order.PutUint16(bs, uint16(v))
case []int16:
for i, x := range v {
order.PutUint16(bs[2*i:], uint16(x))
}
case *uint16:
order.PutUint16(bs, *v)
case uint16:
order.PutUint16(bs, v)
case []uint16:
for i, x := range v {
order.PutUint16(bs[2*i:], x)
}
case *int32:
order.PutUint32(bs, uint32(*v))
case int32:
order.PutUint32(bs, uint32(v))
case []int32:
for i, x := range v {
order.PutUint32(bs[4*i:], uint32(x))
}
case *uint32:
order.PutUint32(bs, *v)
case uint32:
order.PutUint32(bs, v)
case []uint32:
for i, x := range v {
order.PutUint32(bs[4*i:], x)
}
case *int64:
order.PutUint64(bs, uint64(*v))
case int64:
order.PutUint64(bs, uint64(v))
case []int64:
for i, x := range v {
order.PutUint64(bs[8*i:], uint64(x))
}
case *uint64:
order.PutUint64(bs, *v)
case uint64:
order.PutUint64(bs, v)
case []uint64:
for i, x := range v {
order.PutUint64(bs[8*i:], x)
}
case *float32:
order.PutUint32(bs, math.Float32bits(*v))
case float32:
order.PutUint32(bs, math.Float32bits(v))
case []float32:
for i, x := range v {
order.PutUint32(bs[4*i:], math.Float32bits(x))
}
case *float64:
order.PutUint64(bs, math.Float64bits(*v))
case float64:
order.PutUint64(bs, math.Float64bits(v))
case []float64:
for i, x := range v {
order.PutUint64(bs[8*i:], math.Float64bits(x))
}
}
_, err := w.Write(bs)
return err
}
// Fallback to reflect-based encoding.
v := reflect.Indirect(reflect.ValueOf(data))
size := dataSize(v)
if size < 0 {
return errors.New("binary.Write: invalid type " + reflect.TypeOf(data).String())
}
buf := make([]byte, size)
e := &encoder{order: order, buf: buf}
e.value(v)
_, err := w.Write(buf)
return err
}4、binary.Read和binary.Write的應用
當我們使用tcp傳輸數據時，常常會遇到粘包的現象，因此為了解決粘包我們需要告訴對方我們發送的數據包的大小。一般是使用TLV類型的數據協議，分別是Type、Len、Value，Type和Len為數據頭，可以將這個兩個字段都固定為四個字節。讀取數據時，先將Type和Len讀取出來，然后再根據Len來讀取剩余的數據：
例如我們使用客戶端向一個服務端發送數據：
client：
package main
import (
"bytes"
"encoding/binary"
"fmt"
"net"
)
// 對數據進行編碼
func Encode(id uint32, msg []byte) []byte {
var dataLen uint32 = uint32(len(msg))
// *Buffer實現了Writer
buffer := bytes.NewBuffer([]byte{})
// 將id寫入字節切片
if err := binary.Write(buffer, binary.LittleEndian, &id); err != nil {
fmt.Println("Write to buffer error:", err)
}
// 將數據長度寫入字節切片
if err := binary.Write(buffer, binary.LittleEndian, &dataLen); err != nil {
fmt.Println("Write to buffer error:", err)
}
// 最后將數據添加到后面
msg = append(buffer.Bytes(), msg...)
return msg
}
func main() {
dial, err := net.Dial("tcp4", "127.0.0.1:6666")
if err != nil {
fmt.Println("Dial tcp error:", err)
}
// 向服務端發送hello,world!
msg := []byte("hello,world!")
var id uint32 = 1
data := Encode(id, msg)
dial.Write(data)
dial.Close()
}
// 運行結果：
Receive Data, Type:1, Len:12, Message:hello,world!
Connection has been closed by clientserver：
package main
import (
"bytes"
"encoding/binary"
"fmt"
"io"
"net"
)
// 解碼，從字節切片中獲取id和len
func Decode(encoded []byte) (id uint32, l uint32) {
buffer := bytes.NewBuffer(encoded)
if err := binary.Read(buffer, binary.LittleEndian, &id); err != nil {
fmt.Println("Read from buffer error:", err)
}
if err := binary.Read(buffer, binary.LittleEndian, &l); err != nil {
fmt.Println("Read from buffer error:", err)
}
return id, l
}
const MAX_PACKAGE = 4096
func DealConn(conn net.Conn) {
defer conn.Close()
head := make([]byte, 8)
for {
// 先讀取8個字節的頭部，也就是id和dataLen
_, err := io.ReadFull(conn, head)
if err != nil {
if err == io.EOF {
fmt.Println("Connection has been closed by client")
} else {
fmt.Println("Read error:", err)
}
return
}
id, l := Decode(head)
if l > MAX_PACKAGE {
fmt.Println("Received data grater than MAX_PACKAGE")
return
}
// 然后讀取剩余數據
data := make([]byte, l)
_, err = io.ReadFull(conn, data)
if err != nil {
if err == io.EOF {
fmt.Println("Connection has been closed by client")
} else {
fmt.Println("Read error:", err)
}
return
}
// 打印收到的數據
fmt.Printf("Receive Data, Type:%d, Len:%d, Message:%s\n",
id, l, string(data))
}
}
func main() {
listener, err := net.Listen("tcp", "127.0.0.1:6666")
if err != nil {
fmt.Println("Listen tcp error:", err)
return
}
for {
conn, err := listener.Accept()
if err != nil {
fmt.Println("Accept error:", err)
break
}
// 啟動一個協程處理客戶端
go DealConn(conn)
}
}運行結果：
Receive Data, Type:1, Len:12, Message:hello,world!
Connection has been closed by client
到此這篇關于Golang標準庫binary詳解的文章就介紹到這了,更多相關Golang標準庫binary內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
這篇文章主要為大家介紹了Go語言編碼效率提升技巧詳解,學會了從此拒絕加班,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-12-12
golang WebDav 多目錄文件服務的實現
本文介紹使用Golang實現一個WebDav服務,支持在一個端口下為多個用戶提供獨立的目錄訪問權限,通過示例代碼介紹了配置多個目錄,并實現基本的用戶認證,感興趣的可以了解一下2025-12-12
這篇文章主要介紹了go語言中iota和左移右移的使用說明，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2021-05-05
這篇文章主要介紹了Gin框架中的PostForm用法及說明,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2024-06-06
token指的是一種用于驗證用戶身份或授權訪問的憑證,本文主要介紹了Golang使用Token來驗證,具有一定的參考價值,感興趣的可以了解一下2024-08-08
Go語言編程通過dwarf獲取內聯函數
這篇文章主要為大家介紹了Go語言編程通過dwarf獲取內聯函數詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2022-11-11
golang生成RSA公鑰和密鑰的實現方法
本文主要介紹了golang生成RSA公鑰和密鑰的實現方法,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2024-08-08
基于go+vue實現的golang每日新聞數據瀏覽與檢索平臺(推薦)
gonews是基于 go+vue 實現的golang每日新聞瀏覽與檢索平臺，本文通過實例代碼給大家講解，介紹的非常詳細，具有參考借鑒價值，需要的朋友參考下吧2018-01-01
IdeaGo啟動報錯Failed to create JVM的問題解析
這篇文章主要介紹了IdeaGo啟動報錯Failed to create JVM的問題，本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-11-11
這篇文章主要為大家介紹了go?mod文件內容版本號簡單用法詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2022-10-10