golang規則引擎gengine用法案例

更新時間：2024年01月17日 14:20:06 作者：ZHangQL

這篇文章主要為大家介紹了golang?規則引擎gengine用法案例,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪

引言

本文受 golang面試經典講解的[Go工具庫]B 站新一代 golang 規則引擎gengine啟示，文中的基本用法和作者的細節都基本提到了，大家關心的可以去看下設計文檔及作者對比的gopher_lua的對比

本文主要下作者的幾個案例和用法

Part1 基本使用

package main
import (
 "fmt"
 "github.com/bilibili/gengine/builder"
 "github.com/bilibili/gengine/context"
 "github.com/bilibili/gengine/engine"
 "github.com/sirupsen/logrus"
 "time"
)
func main() {
 TestMulti()
}
type User struct {
 Name string
 Age  int64
 Male bool
}
func (u *User) GetNum(i int64) int64 {
 return i
}
func (u *User) Print(s string) {
 fmt.Println(s)
}
func (u *User) Say() {
 fmt.Println("hello world")
}
// 定義規則
const rule1 = `
rule "name test" "i can"  salience 0
begin
    if 7 == User.GetNum(7){
      User.Age = User.GetNum(89767) + 10000000
      User.Print("6666")
    }else{
      User.Name = "yyyy"
    }
end
`
func TestMulti() {
 user := &User{
  Name: "Calo",
  Age:  0,
  Male: true,
 }
 dataContext := context.NewDataContext()
 //注入初始化的結構體
 dataContext.Add("User", user)
 //init rule engine
 ruleBuilder := builder.NewRuleBuilder(dataContext)
 start1 := time.Now()
 //構建規則
 err := ruleBuilder.BuildRuleFromString(rule1) //string(bs)
 end1 := time.Now()
 logrus.Infof("rules num:%d, load rules cost time:%d", len(ruleBuilder.Kc.RuleEntities), end1.Sub(start1).Milliseconds())
 if err != nil {
  logrus.Errorf("err:%s ", err)
 } else {
  eng := engine.NewGengine()
  start := time.Now().UnixNano()
  //執行規則
  err := eng.Execute(ruleBuilder, true)
  println(user.Age)
  end := time.Now().UnixNano()
  if err != nil {
   logrus.Errorf("execute rule error: %v", err)
  }
  logrus.Infof("execute rule cost %d ns", end-start)
  logrus.Infof("user.Age=%d,Name=%s,Male=%t", user.Age, user.Name, user.Male)
 }
}

INFO[0000] rules num:1, load rules cost time:5
6666
10089767
INFO[0000] execute rule cost 97000 ns
INFO[0000] user.Age=10089767,Name=Calo,Male=true

Part2 @name

在規則體中使用@name,指代的是當前規則名,@name在規則執行時,會被解析為規則名字符串(規則內的名字感知)

package main
import (
 "fmt"
 "github.com/bilibili/gengine/builder"
 "github.com/bilibili/gengine/context"
 "github.com/bilibili/gengine/engine"
 "time"
)
func PrintName(name string) {
 fmt.Println(name)
}
/*
*
use '@name',you can get rule name in rule content
*/
const atNameRule = `
rule "測試規則名稱1" "rule desc"
begin
  va = @name
  PrintName(va)
  PrintName(@name)
end
rule "rule name" "rule desc"
begin
  va = @name
  PrintName(va)
  PrintName(@name)
end
`
func exec() {
 dataContext := context.NewDataContext()
 dataContext.Add("PrintName", PrintName)
 //init rule engine
 ruleBuilder := builder.NewRuleBuilder(dataContext)
 //resolve rules from string
 start1 := time.Now().UnixNano()
 err := ruleBuilder.BuildRuleFromString(atNameRule)
 end1 := time.Now().UnixNano()
 println(fmt.Sprintf("rules num:%d, load rules cost time:%d ns", len(ruleBuilder.Kc.RuleEntities), end1-start1))
 if err != nil {
  panic(err)
 }
 eng := engine.NewGengine()
 start := time.Now().UnixNano()
 // true: means when there are many rules， if one rule execute error，continue to execute rules after the occur error rule
 err = eng.Execute(ruleBuilder, true)
 end := time.Now().UnixNano()
 if err != nil {
  panic(err)
 }
 println(fmt.Sprintf("execute rule cost %d ns", end-start))
}
func main() {
 exec()
}

rules num:2, load rules cost time:2820000 ns
測試規則名稱1
測試規則名稱1
rule name
rule name
execute rule cost 72000 ns

@name 主要是獲取規則的名字的

Part3 @id

在規則體中使用@id含義是,如果當前的規則名是可以轉化為整數的字符串,則@id就是規則名的整數值,如果規則名字符串不可轉化為整數，則@id的值為0.這個是為了方便用戶以規則名作為整型參數

package main
import (
 "fmt"
 "github.com/bilibili/gengine/builder"
 "github.com/bilibili/gengine/context"
 "github.com/bilibili/gengine/engine"
)
/*
*
use '@id',you can get rule name in rule content
*/
const atIDRule = `
rule "測試規則名稱1" "rule desc" salience 10
begin
 println(@id)
end
rule " 100 " "rule desc" salience 20
begin
 x = @id
 println(x)
end
`
func TestAtId() {
 dataContext := context.NewDataContext()
 dataContext.Add("println", fmt.Println)
 //init rule engine
 ruleBuilder := builder.NewRuleBuilder(dataContext)
 //resolve rules from string
 err := ruleBuilder.BuildRuleFromString(atIDRule)
 if err != nil {
  panic(err)
 }
 eng := engine.NewGengine()
 err = eng.Execute(ruleBuilder, false)
 if err != nil {
  panic(err)
 }
}
type Data struct {
 M map[string]string
}
func (d *Data) exe() {
 println("hhhh")
}
func main() {
 TestAtId()
}

100
0

Part4 @desc語法

在規則體內獲知當前規則的描述信息,類型為字符串

package main
import (
 "fmt"
 "github.com/bilibili/gengine/builder"
 "github.com/bilibili/gengine/context"
 "github.com/bilibili/gengine/engine"
 "time"
)
/*
*
use '@desc',you can get rule description in rule content
*/
const atDescRule = `
rule "rule name 1" "我是一個測試用的描述信息1" salience 100
begin
  desc = @desc
  Print(desc)
  Print(@name + " : " + @desc)
end
rule "rule name 2" //"我是描述，desc" salience 10
begin
  desc = @desc
  Print(desc)
  Print(@name + " : " + @desc)
end
`
func main() {
 dataContext := context.NewDataContext()
 // dataContext.Add("Print", PrintName)
 dataContext.Add("Print", fmt.Println)
 //init rule engine
 ruleBuilder := builder.NewRuleBuilder(dataContext)
 //resolve rules from string
 start1 := time.Now().UnixNano()
 err := ruleBuilder.BuildRuleFromString(atDescRule)
 end1 := time.Now().UnixNano()
 println(fmt.Sprintf("rules num:%d, load rules cost time:%d ns", len(ruleBuilder.Kc.RuleEntities), end1-start1))
 if err != nil {
  panic(err)
 }
 eng := engine.NewGengine()
 // true: means when there are many rules， if one rule execute error，continue to execute rules after the occur error rule
 err = eng.Execute(ruleBuilder, true)
 if err != nil {
  panic(err)
 }
}

rules num:2, load rules cost time:3172000 ns
我是一個測試用的描述信息1
rule name 1 : 我是一個測試用的描述信息1

rule name 2 :

注意如果有//是注釋無法解析到

Part5 sal

在規則體內獲知當前規則的優先級信息，類型為int64

package main
import (
 "fmt"
 "github.com/bilibili/gengine/builder"
 "github.com/bilibili/gengine/context"
 "github.com/bilibili/gengine/engine"
 "time"
)
func main() {
 dataContext := context.NewDataContext()
 dataContext.Add("println", fmt.Println)
 //init rule engine
 ruleBuilder := builder.NewRuleBuilder(dataContext)
 err := ruleBuilder.BuildRuleFromString(`
rule "1" salience 10
begin
 println(@sal)
end
rule "2" 
begin
 println(@sal)
end
`)
 if err != nil {
  panic(err)
 }
 eng := engine.NewGengine()
 start := time.Now().UnixNano()
 // true: means when there are many rules， if one rule execute error，continue to execute rules after the occur error rule
 err = eng.Execute(ruleBuilder, true)
 end := time.Now().UnixNano()
 if err != nil {
  panic(err)
 }
 println(fmt.Sprintf("execute rule cost %d ns", end-start))
}

10
0
execute rule cost 120000 ns

Part6 注釋

支持規則內的單行注釋,注釋以雙斜杠(//)開頭

Part7 自定義變量

用戶自定義變量無需申明類型規則內定義的變量,只對當前規則可見,對其他規則不可見(局部變量) 使用dataContext注入的(變量)數據,對加載到gengine中的所有規則均可見(全局變量)

Part8 報錯時行號提示

gengine支持的語法,是完整的DSL語法(也可以當作是一門完整的語言),gengine規則執行出錯時,gengine會指出具體的出錯在哪一行.盡量幫助用戶在使用gengine的每一個流程細節上,都有絲滑體驗

package main
import (
 "fmt"
 "github.com/bilibili/gengine/builder"
 "github.com/bilibili/gengine/context"
 "github.com/bilibili/gengine/engine"
)
var lineNumberRules = `
rule "line_number"  "when execute error,gengine will give out error"
begin
//Println("golang", "hello", "world" )
//取消斜杠注釋，依次測試不同的報錯情況
//if Println("golang", "hello") == 100 {
//  Println("golang", "hello")
//}
ms.X()
end
`
type MyStruct struct {
}
func (m *MyStruct) XX(s string) {
 println("XX")
}
func Println(s1, s2 string) bool {
 println(s1, s2)
 return false
}
func main() {
 dataContext := context.NewDataContext()
 //注入自定義函數
 dataContext.Add("Println", Println)
 ms := &MyStruct{}
 dataContext.Add("ms", ms)
 ruleBuilder := builder.NewRuleBuilder(dataContext)
 e1 := ruleBuilder.BuildRuleFromString(lineNumberRules)
 if e1 != nil {
  panic(e1)
 }
 eng := engine.NewGengine()
 // true: means when there are many rules， if one rule execute error，continue to execute rules after the occur error rule
 e2 := eng.Execute(ruleBuilder, true)
 if e2 != nil {
  println(fmt.Sprintf("%+v", e2))
 }
}

[rule: "line_number" executed, error:
line 12, column 0, code: ms.X(), NOT FOUND Function: X ]

Part9 多級調用支持

現在已經支持了A.B.C形式的三級調用,但三級以上的調用則不支持其他細節說明:

1.當語法是C,或者a=C, 則C可以為具體值、變量、函數或方法、結構體(指針)、map、slice、array等, 具體的如 a=100, a = Mp["hello"], a = x, a = getMessage(p1,p2..)等

2.當語法是A.C,或者a=A.C, 則A必須為結構體(指針), C同上, 具體如a = A.Mp["hello"], a = A.Field1, a = A.GetMessage(p1,p2..)等

3.當語法是A.B.C,或者a=A.B.C, 則A和B必須為結構體(指針),C同上, 具體如 a = A.B.Mp["hello"], a =A.B.Field1, a= A.B.GetMessage(p1, p2..)等

那么,如果語法為A.B.C時, A.Mp["hello"].C 這種語法是不合法的

package main
import (
 "fmt"
 "github.com/bilibili/gengine/builder"
 "github.com/bilibili/gengine/context"
 "github.com/bilibili/gengine/engine"
)
type B struct {
 Name string
 Mp   map[string]string
 Ar   [5]string
 Sl   []int
}
func (b *B) Meth(s string) {
 println("--->", s)
}
func main() {
 type A struct {
  N  string
  Ma map[string]string
  B  *B
 }
 rule := `
rule "three level call"
begin
 conc{
 A.B.Name = "xiaoMing"
 A.B.Mp["hello"] = "world"
 A.B.Ar[1] = "Calo"
 A.B.Sl[2] = 3
 x = A.B.Sl[0]
 A.B.Meth(A.B.Ar[1])
 A.N = "kakaka"
 A.Ma["a"] = "b"
 }
 println(A.B.Name, A.B.Mp["hello"], A.B.Ar[1], A.B.Sl[2], x, A.N, A.Ma["a"])
 if A.B.Sl[0] == 0 {
  println(true)
 }
end
`
 b := B{
  Name: "",
  Mp:   make(map[string]string),
  Ar:   [5]string{},
  Sl:   make([]int, 6),
 }
 pA := &A{
  N:  "",
  Ma: make(map[string]string),
  B:  &b,
 }
 dataContext := context.NewDataContext()
 dataContext.Add("println", fmt.Println)
 dataContext.Add("A", pA)
 ruleBuilder := builder.NewRuleBuilder(dataContext)
 e := ruleBuilder.BuildRuleFromString(rule)
 if e != nil {
  panic(e)
 }
 gengine := engine.NewGengine()
 e = gengine.Execute(ruleBuilder, true)
 if e != nil {
  panic(e)
 }
 println(pA.B.Name, pA.B.Mp["hello"], pA.B.Ar[1], pA.B.Sl[2])
}