SpringBoot項目實現分布式日志鏈路追蹤
1.概述
作為一名后端開發工程師,排查系統問題用得最多的手段之一就是查看系統日志,在當下主要的分布式集群環境中一般使用ELK(Elasticsearch , Logstash, Kibana)來統一收集日志,以便后續查看日志定位追蹤相關問題。但是在并發情況下,大量的系統用戶即多線程并發訪問后端服務導致同一個請求的日志記錄不再是連續相鄰的,此時多個請求的日志是一起串行輸出到文件中,所以我們篩選出指定請求的全部相關日志還是比較麻煩的,同時當后端異步處理功能邏輯以及微服務的下游服務調用日志追蹤也有著相同的問題。
為了快速排查、定位、解決日常反饋的系統問題,我們就必須解決上面所說的查看請求日志的痛點。解決方案就是:每個請求都使用一個唯一標識traceId來追蹤全部的鏈路顯示在日志中,并且不修改原有的打印方式(代碼無入侵),然后使用使用Logback的MDC機制日志模板中加入traceId標識,取值方式為%X{traceId} 。這樣在收集的日志文件中就可以看到每行日志有一個tracceId值,每個請求的值都不一樣,這樣我們就可以根據traceId查詢過濾出一次請求的所有上下文日志了。
2.實現方案
MDC(Mapped Diagnostic Context,映射調試上下文)是 log4j 和logback 提供的一種方便在多線程條件下記錄日志的功能。MDC 可以看成是一個與當前線程綁定的Map,可以往其中添加鍵值對。MDC 中包含的內容可以被同一線程中執行的代碼所訪問。當前線程的子線程會繼承其父線程中的 MDC 的內容。當需要記錄日志時,只需要從MDC 中獲取所需的信息即可。MDC的內容則由程序在適當?shù)臅r候保存進去。對于一個 Web 應用來說,通常是在請求被處理的最開始保存這些數據。
由于MDC內部使用的是ThreadLocal所以只有本線程才有效,子線程和下游的服務MDC里的值會丟失;所以方案主要的難點是解決traceId值的傳遞問題,需要重點關注一下兩點:
MDC中traceId數據如何傳遞給下游服務,下游服務如何接收traceId并放入MDC中- 異步的情況下(線程池)如何把
traceId值傳給子線程。
2.1 設置日志模板
無論是我們的項目使用的是log4j還是logback框架,我們都需要先調整日志配置文件的日志格式如下:
<!-- 日志格式 -->
<property name="CONSOLE_LOG_PATTERN" value="[%X{traceId}] [%-5p] [%d{yyyy-MM-dd HH:mm:ss.SSS}] [%t@${PID}] %c %M : %m%n"/>這樣才能有效地把traceId收集到日志文件中。
2.2 請求上下文設置traceId并有效傳遞下游服務
按照上面說的,每個請求使用一個唯一標識traceId來追蹤一次請求的全部日志,這就要求我們的traceId必須保證唯一性,不然就會出現請求日志混亂問題,是絕對不允許的。這里我們利用hutool框架的生成id工具IdUtil來生成唯一值,可以生成uuid或者使用雪花算法Snowflake生成唯一id都可以,因為這里id是記錄在日志文件中做唯一標識用的,所以對id字符類型,遞增性那些沒啥要求,只要唯一標識即可,按照之前習慣,我就用雪花算法生成唯一id標識了。
生成traceId并放入到MDC上下文中
public class WebTraceFilter extends OncePerRequestFilter {
?
?
? ?@Override
? ?protected void doFilterInternal(HttpServletRequest request, HttpServletResponse response,
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FilterChain filterChain) throws IOException, ServletException {
? ? ? ?try {
? ? ? ? ? ?String traceId = request.getHeader(MDCTraceUtils.TRACE_ID_HEADER);
? ? ? ? ? ?if (StrUtil.isEmpty(traceId)) {
? ? ? ? ? ? ? ?MDCTraceUtils.addTrace();
? ? ? ? ? } else {
? ? ? ? ? ? ? ?MDCTraceUtils.putTrace(traceId);
? ? ? ? ? }
? ? ? ? ? ?filterChain.doFilter(request, response);
? ? ? } finally {
? ? ? ? ? ?MDCTraceUtils.removeTrace();
? ? ? }
? }
}這里通過一個過濾器來設置traceId放入到MDC中,可以將該過濾器的執行優先級設置比較靠前,這樣就可以有效保證我們一次請求上下文的日志中都有traceId了。同時這個過濾器我們是集成在自定義實現的web starter中,公司的所有服務都會引用web starter集成該過濾器,意味著只要我們請求下游服務時添加了traceId這個header,下游服務執行到該過濾器時就會拿到上游服務傳遞過來的traceId值放入到當前服務的MDC中。MDCTraceUtils工具類代碼如下:
public class MDCTraceUtils {
? ?/**
? ? * 追蹤id的名稱
? ? */
? ?public static final String KEY_TRACE_ID = "traceId";
?
? ?/**
? ? * 日志鏈路追蹤id信息頭
? ? */
? ?public static final String TRACE_ID_HEADER = "x-traceId-header";
?
?
? ?/**
? ? * 創建traceId并賦值MDC
? ? */
? ?public static void addTrace() {
? ? ? ?String traceId = createTraceId();
? ? ? ?MDC.put(KEY_TRACE_ID, traceId);
? }
?
? ?/**
? ? * 賦值MDC
? ? */
? ?public static void putTrace(String traceId) {
? ? ? ?MDC.put(KEY_TRACE_ID, traceId);
? }
?
? ?/**
? ? * 獲取MDC中的traceId值
? ? */
? ?public static String getTraceId() {
? ? ? ?return MDC.get(KEY_TRACE_ID);
? }
?
? ?/**
? ? * 清除MDC的值
? ? */
? ?public static void removeTrace() {
? ? ? ?MDC.remove(KEY_TRACE_ID);
? }
?
? ?/**
? ? * 創建traceId
? ? */
? ?public static String createTraceId() {
? ? ? ?return IdUtil.getSnowflake().nextIdStr();
? }
?
}接下來我們就來演示下traceId如何在服務間有效傳遞。無論是微服務間的服務調用還是單體項目的調用下游服務,我都建議使用Spring Cloud框架中的openfeign組件進行服務間接口調用,如果對組件openfeign不太熟悉的,可以看看之前我總結的 openfeign實現原理進行了解。這里就用openFeign進行模擬服務間調用下游服務獲取車間列表的接口
@FeignClient(name = "workshopService", url = "http://127.0.0.1:16688/textile", path = "/workshop")
public interface WorkshopService {
? ?@GetMapping("/list/temp")
? ?ResponseVO<List<WorkshopDTO>> getList();
}增加feign攔截器,繼續把當前服務的traceId值傳遞給下游服務
public class FeignInterceptor implements RequestInterceptor {
? ?@Override
? ?public void apply(RequestTemplate requestTemplate) {
? ? ? ?ServletRequestAttributes requestAttributes = (ServletRequestAttributes) RequestContextHolder.getRequestAttributes();
? ? ? ?// 傳遞請求相關header
? ? ? ?if (requestAttributes != null) {
? ? ? ? ? ?HttpServletRequest request = requestAttributes.getRequest();
? ? ? ? ? ?Enumeration<String> headerNames = request.getHeaderNames();
? ? ? ? ? ?if (headerNames != null) {
? ? ? ? ? ? ? ?while (headerNames.hasMoreElements()) {
? ? ? ? ? ? ? ? ? ?String name = headerNames.nextElement();
? ? ? ? ? ? ? ? ? ?// 跳過 content-length
? ? ? ? ? ? ? ? ? ?if (Objects.equals("content-length", name)){
? ? ? ? ? ? ? ? ? ? ? ?continue;
? ? ? ? ? ? ? ? ? }
? ? ? ? ? ? ? ? ? ?String value = request.getHeader(name);
? ? ? ? ? ? ? ? ? ?requestTemplate.header(name, value);
? ? ? ? ? ? ? }
? ? ? ? ? }
? ? ? }
? ? ? ?// 傳遞日志追蹤的traceId
? ? ? ?String traceId = MDCTraceUtils.getTraceId();
? ? ? ?if (StringUtils.isNotBlank(traceId)) {
? ? ? ? ? ?requestTemplate.header(MDCTraceUtils.TRACE_ID_HEADER, traceId);
? ? ? }
? }
}可以看到這里主要完成傳遞請求的header,traceId這個header單獨處理,這是因為webTraceFilter過濾器中只把traceId放入了MDC中,并沒有吧traceId放入到請求的header中,servlet層的filter過濾器Spring不建議修改請求的參數,包括header,改起來也比較麻煩,所以這里需要單獨處理傳遞。當然這里的攔截器FeignInterceptor和上面的過濾器WebTraceFilter都需要注入到Spring容器中。
編寫代碼進行接口調用測試:
? ?@GetMapping("/trace")
? ?public void testTrace() {
? ? ? ?log.info("開始執行咯");
? ? ? ?BaseQuery query = new BaseQuery();
? ? ? ?ResponseVO<List<WorkshopDTO>> responseVO = workshopService.getList();
? ? ? ?log.info("接口返回結果:{}", responseVO);
? }執行日志打印如下,當前服務的日志:
[1675794072381583360] [INFO ] [2023-07-03 17:10:16.289] [http-nio-18888-exec-5@24417] com.plasticene.boot.web.core.aop.ApiLogPrintAspect timeAround : Request Info : {"ip":"127.0.0.1","url":"http://127.0.0.1:18888/fds/test/trace","httpMethod":"GET","classMethod":"com.plasticene.fast.controller.TestController.testTrace","requestParams":null}
[1675794072381583360] [INFO ] [2023-07-03 17:10:16.299] [http-nio-18888-exec-5@24417] com.plasticene.fast.controller.TestController testTrace$original$mZGAheRd : 開始執行咯
[1675794072381583360] [INFO ] [2023-07-03 17:10:17.087] [http-nio-18888-exec-5@24417] com.plasticene.fast.controller.TestController testTrace$original$mZGAheRd : 接口返回結果:ResponseVO(code=200, msg=OK, data=[WorkshopDTO(id=3, orgId=4, name=檢驗車間, location=杭州市西湖區, remark=這里是最嚴格的, machineCount=null)])
[1675794072381583360] [INFO ] [2023-07-03 17:10:17.088] [http-nio-18888-exec-5@24417] com.plasticene.boot.web.core.aop.ApiLogPrintAspect timeAround : Response result: null
[1675794072381583360] [INFO ] [2023-07-03 17:10:17.089] [http-nio-18888-exec-5@24417] com.plasticene.boot.web.core.aop.ApiLogPrintAspect timeAround : time cost: 805
traceId為:1675794072381583360,看看下游服務textile的日志如下:
[1675794072381583360] [INFO ] [2023-07-03 17:10:16.438] [http-nio-16688-exec-1@24461] com.plasticene.boot.web.core.aop.ApiLogPrintAspect timeAround : Request Info : {"ip":"127.0.0.1","url":"http://127.0.0.1:16688/textile/workshop/list/temp","httpMethod":"GET","classMethod":"com.plasticene.textile.controller.WorkshopController.getAllList","requestParams":null}
[1675794072381583360] [DEBUG] [2023-07-03 17:10:16.939] [http-nio-16688-exec-1@24461] com.plasticene.textile.dao.WorkshopDAO.selectList debug : ==> Preparing: SELECT id, org_id, name, location, remark, create_time, update_time, creator, updater FROM workshop WHERE (org_id = ?) ORDER BY id DESC
[1675794072381583360] [DEBUG] [2023-07-03 17:10:16.972] [http-nio-16688-exec-1@24461] com.plasticene.textile.dao.WorkshopDAO.selectList debug : ==> Parameters: 4(Integer)
[1675794072381583360] [DEBUG] [2023-07-03 17:10:17.008] [http-nio-16688-exec-1@24461] com.plasticene.textile.dao.WorkshopDAO.selectList debug : <== Total: 1
[1675794072381583360] [INFO ] [2023-07-03 17:10:17.029] [http-nio-16688-exec-1@24461] com.plasticene.boot.web.core.aop.ApiLogPrintAspect timeAround : Response result: [{"id":3,"orgId":4,"name":"檢驗車間","location":"杭州市西湖區","remark":"這里是最嚴格的","machineCount":null}]
[1675794072381583360] [INFO ] [2023-07-03 17:10:17.040] [http-nio-16688-exec-1@24461] com.plasticene.boot.web.core.aop.ApiLogPrintAspect timeAround : time cost: 621
可以看到兩個服務的traceId都是一樣的,這就說明我們的traceId有效傳遞了。
當然我們也可以使用Spring自帶的RestTemplate、或者httpClient、OkHttp3等框架進行接口調用,只要請求接口時設置traceId這個header即可,使用restTemplate客戶端調接口時,還可以通過擴展點ClientHttpRequestInterceptor接口的實現類對請求進行攔截處理進行統一traceId的header設置,這樣就不用每個接口請求都要設置一遍,盡量減少重復勞動做到優雅不過時。這里不在展示詳細,請自我去實現。
2.3 異步父子線程traceId傳遞
上面說過MDC內部使用的是ThreadLocal,所以只有本線程才有效,子線程和下游的服務MDC里的值會丟失。我們項目服務使用的logback日志框架,所以我們需要重寫logback的LogbackMDCAdapter,由于logback的MDC實現內部使用的是ThreadLocal不能傳遞子線程,所以需要重寫替換為阿里的TransmittableThreadLocal。TransmittableThreadLocal 是Alibaba開源的、用于解決在使用線程池等會池化復用線程的執行組件情況下,提供ThreadLocal值的傳遞功能,解決異步執行時上下文傳遞的問題。
重寫logback的LogbackMDCAdapter,自定義實現TtlMDCAdapter類,其實就是把LogbackMDCAdapter的ThreadLocal換成TransmittableThreadLocal即可,其他代碼都是一樣的。
/**
*重構{@link LogbackMDCAdapter}類,搭配TransmittableThreadLocal實現父子線程之間的數據傳遞
*
* @author fjzheng
* @version 1.0
* @date 2022/7/14 13:50
*/
public class TtlMDCAdapter implements MDCAdapter {
? ?private final ThreadLocal<Map<String, String>> copyOnInheritThreadLocal = new TransmittableThreadLocal<>();
?
? ?private static final int WRITE_OPERATION = 1;
? ?private static final int MAP_COPY_OPERATION = 2;
?
? ?private static TtlMDCAdapter mtcMDCAdapter;
?
? ?/**
? ? * keeps track of the last operation performed
? ? */
? ?private final ThreadLocal<Integer> lastOperation = new ThreadLocal<>();
?
? ?static {
? ? ? ?mtcMDCAdapter = new TtlMDCAdapter();
? ? ? ?MDC.mdcAdapter = mtcMDCAdapter;
? }
?
? ?public static MDCAdapter getInstance() {
? ? ? ?return mtcMDCAdapter;
? }
?
? ?private Integer getAndSetLastOperation(int op) {
? ? ? ?Integer lastOp = lastOperation.get();
? ? ? ?lastOperation.set(op);
? ? ? ?return lastOp;
? }
?
? ?private static boolean wasLastOpReadOrNull(Integer lastOp) {
? ? ? ?return lastOp == null || lastOp == MAP_COPY_OPERATION;
? }
?
? ?private Map<String, String> duplicateAndInsertNewMap(Map<String, String> oldMap) {
? ? ? ?Map<String, String> newMap = Collections.synchronizedMap(new HashMap<>());
? ? ? ?if (oldMap != null) {
? ? ? ? ? ?// we don't want the parent thread modifying oldMap while we are
? ? ? ? ? ?// iterating over it
? ? ? ? ? ?synchronized (oldMap) {
? ? ? ? ? ? ? ?newMap.putAll(oldMap);
? ? ? ? ? }
? ? ? }
?
? ? ? ?copyOnInheritThreadLocal.set(newMap);
? ? ? ?return newMap;
? }
?
? ?/**
? ? * Put a context value (the <code>val</code> parameter) as identified with the
? ? * <code>key</code> parameter into the current thread's context map. Note that
? ? * contrary to log4j, the <code>val</code> parameter can be null.
? ? * <p/>
? ? * <p/>
? ? * If the current thread does not have a context map it is created as a side
? ? * effect of this call.
? ? *
? ? * @throws IllegalArgumentException in case the "key" parameter is null
? ? */
? ?@Override
? ?public void put(String key, String val) {
? ? ? ?if (key == null) {
? ? ? ? ? ?throw new IllegalArgumentException("key cannot be null");
? ? ? }
?
? ? ? ?Map<String, String> oldMap = copyOnInheritThreadLocal.get();
? ? ? ?Integer lastOp = getAndSetLastOperation(WRITE_OPERATION);
?
? ? ? ?if (wasLastOpReadOrNull(lastOp) || oldMap == null) {
? ? ? ? ? ?Map<String, String> newMap = duplicateAndInsertNewMap(oldMap);
? ? ? ? ? ?newMap.put(key, val);
? ? ? } else {
? ? ? ? ? ?oldMap.put(key, val);
? ? ? }
? }
?
? ?/**
? ? * Remove the the context identified by the <code>key</code> parameter.
? ? * <p/>
? ? */
? ?@Override
? ?public void remove(String key) {
? ? ? ?if (key == null) {
? ? ? ? ? ?return;
? ? ? }
? ? ? ?Map<String, String> oldMap = copyOnInheritThreadLocal.get();
? ? ? ?if (oldMap == null) {
? ? ? ? ? ?return;
? ? ? }
?
? ? ? ?Integer lastOp = getAndSetLastOperation(WRITE_OPERATION);
?
? ? ? ?if (wasLastOpReadOrNull(lastOp)) {
? ? ? ? ? ?Map<String, String> newMap = duplicateAndInsertNewMap(oldMap);
? ? ? ? ? ?newMap.remove(key);
? ? ? } else {
? ? ? ? ? ?oldMap.remove(key);
? ? ? }
?
? }
?
?
? ?/**
? ? * Clear all entries in the MDC.
? ? */
? ?@Override
? ?public void clear() {
? ? ? ?lastOperation.set(WRITE_OPERATION);
? ? ? ?copyOnInheritThreadLocal.remove();
? }
?
? ?/**
? ? * Get the context identified by the <code>key</code> parameter.
? ? * <p/>
? ? */
? ?@Override
? ?public String get(String key) {
? ? ? ?final Map<String, String> map = copyOnInheritThreadLocal.get();
? ? ? ?if ((map != null) && (key != null)) {
? ? ? ? ? ?return map.get(key);
? ? ? } else {
? ? ? ? ? ?return null;
? ? ? }
? }
?
? ?/**
? ? * Get the current thread's MDC as a map. This method is intended to be used
? ? * internally.
? ? */
? ?public Map<String, String> getPropertyMap() {
? ? ? ?lastOperation.set(MAP_COPY_OPERATION);
? ? ? ?return copyOnInheritThreadLocal.get();
? }
?
? ?/**
? ? * Returns the keys in the MDC as a {@link Set}. The returned value can be
? ? * null.
? ? */
? ?public Set<String> getKeys() {
? ? ? ?Map<String, String> map = getPropertyMap();
?
? ? ? ?if (map != null) {
? ? ? ? ? ?return map.keySet();
? ? ? } else {
? ? ? ? ? ?return null;
? ? ? }
? }
?
? ?/**
? ? * Return a copy of the current thread's context map. Returned value may be
? ? * null.
? ? */
? ?@Override
? ?public Map<String, String> getCopyOfContextMap() {
? ? ? ?Map<String, String> hashMap = copyOnInheritThreadLocal.get();
? ? ? ?if (hashMap == null) {
? ? ? ? ? ?return null;
? ? ? } else {
? ? ? ? ? ?return new HashMap<>(hashMap);
? ? ? }
? }
?
? ?@Override
? ?public void setContextMap(Map<String, String> contextMap) {
? ? ? ?lastOperation.set(WRITE_OPERATION);
?
? ? ? ?Map<String, String> newMap = Collections.synchronizedMap(new HashMap<>());
? ? ? ?newMap.putAll(contextMap);
?
? ? ? ?// the newMap replaces the old one for serialisation's sake
? ? ? ?copyOnInheritThreadLocal.set(newMap);
? }
}接下來只需要實現程序啟動時加載上我們自己實現的TtlMDCAdapter:
/**
*
* 初始化TtlMDCAdapter實例,并替換MDC中的adapter對象
*
* @author fjzheng
* @version 1.0
* @date 2022/7/14 13:55
*/
public class TtlMDCAdapterInitializer implements ApplicationContextInitializer<ConfigurableApplicationContext> {
? ?@Override
? ?public void initialize(ConfigurableApplicationContext applicationContext) {
? ? ? ?//加載TtlMDCAdapter實例
? ? ? ?TtlMDCAdapter.getInstance();
? }
}這樣我們在異步多線程情況下MDC的traceId值就能正常傳遞,下面來看看測試示例:
? // 定義線程池
? private ThreadFactory namedThreadFactory = new ThreadFactoryBuilder()
? ? ? ? ? .setNameFormat("letter-pool-%d").build();
? private ExecutorService fixedThreadPool = new ThreadPoolExecutor(Runtime.getRuntime().availableProcessors()*2,
? ? ? ? ? ?Runtime.getRuntime().availableProcessors() * 40,
? ? ? ? ? ?0L,
? ? ? ? ? ?TimeUnit.MILLISECONDS,
? ? ? ? ? ?new LinkedBlockingQueue<Runnable>(Runtime.getRuntime().availableProcessors() * 20),
? ? ? ? ? ?namedThreadFactory);
? ?// 測試接口
? ?@GetMapping("/async")
? ?public void testAsync() {
? ? ? ?log.info("打印日志了");
? ? ? ?fixedThreadPool.execute(()->{
? ? ? ? ? ?log.info("異步執行了");
? ? ? ? ? ?try {
? ? ? ? ? ? ? ?Student student = null;
? ? ? ? ? ? ? ?String name = student.getName();
? ? ? ? ? } catch (Exception e) {
? ? ? ? ? ? ? ?log.error("異步報錯了:", e);
? ? ? ? ? }
?
? ? ? });
? }執行結果日志打印如下:、
[1675805796950241280] [INFO ] [2023-07-03 17:56:51.683] [http-nio-18888-exec-8@24417] com.plasticene.boot.web.core.aop.ApiLogPrintAspect timeAround : Request Info : {"ip":"127.0.0.1","url":"http://127.0.0.1:18888/fds/test","httpMethod":"GET","classMethod":"com.plasticene.fast.controller.TestController.test","requestParams":null}
[1675805796950241280] [INFO ] [2023-07-03 17:56:51.698] [http-nio-18888-exec-8@24417] com.plasticene.fast.controller.TestController test$original$mZGAheRd : 打印日志了
[1675805796950241280] [INFO ] [2023-07-03 17:56:51.700] [http-nio-18888-exec-8@24417] com.plasticene.boot.web.core.aop.ApiLogPrintAspect timeAround : Response result: null
[1675805796950241280] [INFO ] [2023-07-03 17:56:51.700] [http-nio-18888-exec-8@24417] com.plasticene.boot.web.core.aop.ApiLogPrintAspect timeAround : time cost: 24
[1675805796950241280] [INFO ] [2023-07-03 17:56:51.700] [letter-pool-1@24417] com.plasticene.fast.controller.TestController lambda$test$0 : 異步執行了
[1675805796950241280] [ERROR] [2023-07-03 17:56:51.704] [letter-pool-1@24417] com.plasticene.fast.controller.TestController lambda$test$0 : 異步報錯了:
java.lang.NullPointerException: null
at com.plasticene.fast.controller.TestController.lambda$test$0(TestController.java:93)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
at java.lang.Thread.run(Thread.java:748)
3.總結
以上全部就是關于Spring Boot如何實現分布式日志鏈路追蹤的相關知識點。工欲善其事,必先利其器,我們要想快速通過日志定位系統問題,就必須通過traceId高效查找一次請求的全部上下文日志,包括異步執行的邏輯。
以上就是SpringBoot項目實現分布式日志鏈路追蹤的詳細內容,更多關于SpringBoot 日志鏈路追蹤的資料請關注腳本之家其它相關文章!
相關文章
Spring?Boot在Web應用中基于JdbcRealm安全驗證過程
這篇文章主要為大家介紹了Spring?Boot在Web應用中基于JdbcRealm安全驗證過程詳解,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪<BR>2023-02-02
idea插件之如何使用JarEditor編輯Java JAR文件
JarEditor是一款用于在IntelliJIDEA中直接編輯JAR文件的插件,支持反編譯查看和編輯.class文件,并提供即時編譯與保存功能,通過JarEditor,用戶可以在IDE內一站式完成JAR文件的編輯、管理和打包操作,提高開發效率,但在生產環境中使用前,請確保備份并測試修改2025-01-01
Java docx4j實現Word到PDF轉換的完整指南
本文介紹了如何使用docx4j這個開源Java庫來將Microsoft Word的.docx文檔轉換為PDF格式,文中的示例代碼講解詳細,感興趣的小伙伴可以了解下2026-02-02
Mybatis Plus 增刪改查的實現(小白教程)
本文主要介紹了Mybatis Plus 增刪改查,文中通過示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2021-09-09

