詳解Java的readBytes是怎么實現的
1.前言
眾所周知,Java是一門跨平臺語言,針對不同的操作系統有不同的實現。本文從一個非常簡單的api調用來看看Java具體是怎么做的.
2.源碼分析
從FileInputStream.java中看到readBytes最后是native調用
/**
* Reads a subarray as a sequence of bytes.
* @param b the data to be written
* @param off the start offset in the data
* @param len the number of bytes that are written
* @exception IOException If an I/O error has occurred.
*/
private native int readBytes(byte b[], int off, int len) throws IOException; // native調用
/**
* Reads up to <code>b.length</code> bytes of data from this input
* stream into an array of bytes. This method blocks until some input
* is available.
*
* @param b the buffer into which the data is read.
* @return the total number of bytes read into the buffer, or
* <code>-1</code> if there is no more data because the end of
* the file has been reached.
* @exception IOException if an I/O error occurs.
*/
public int read(byte b[]) throws IOException {
return readBytes(b, 0, b.length);
}從jdk源碼中,我們找到FileInputStream.c(/jdk/src/share/native/java/io),此文件定義了對應文件的native調用.
// FileInputStream.c
JNIEXPORT jint JNICALL
Java_java_io_FileInputStream_readBytes(JNIEnv *env, jobject this,
jbyteArray bytes, jint off, jint len) {
return readBytes(env, this, bytes, off, len, fis_fd);
}我們觀察下當前的目錄,可以看到java 對典型的四種unix like的系統(bsd, linux, macosx, solaris), 以及windows 提供了特殊實現。share是公用部分。

在頭部獲取文件fd field (fd 是非負正整數,用來標識打開文件)
// FileInputStream.c
JNIEXPORT void JNICALL
Java_java_io_FileInputStream_initIDs(JNIEnv *env, jclass fdClass) {
fis_fd = (*env)->GetFieldID(env, fdClass, "fd", "Ljava/io/FileDescriptor;"); /* fd field,后面用來獲取 fd */
}繼續調用readBytes
// ioutil.c
jint
readBytes(JNIEnv *env, jobject this, jbyteArray bytes,
jint off, jint len, jfieldID fid)
{
jint nread;
char stackBuf[BUF_SIZE];
char *buf = NULL;
FD fd;
if (IS_NULL(bytes)) {
JNU_ThrowNullPointerException(env, NULL);
return -1;
}
if (outOfBounds(env, off, len, bytes)) { /* 越界判斷 */
JNU_ThrowByName(env, "java/lang/IndexOutOfBoundsException", NULL);
return -1;
}
if (len == 0) {
return 0;
} else if (len > BUF_SIZE) {
buf = malloc(len); /* 緩沖區不足,動態分配內存 */
if (buf == NULL) {
JNU_ThrowOutOfMemoryError(env, NULL);
return 0;
}
} else {
buf = stackBuf;
}
fd = GET_FD(this, fid); /* 獲取fd */
if (fd == -1) {
JNU_ThrowIOException(env, "Stream Closed");
nread = -1;
} else {
nread = IO_Read(fd, buf, len); /* 執行read,系統調用 */
if (nread > 0) {
(*env)->SetByteArrayRegion(env, bytes, off, nread, (jbyte *)buf);
} else if (nread == -1) {
JNU_ThrowIOExceptionWithLastError(env, "Read error");
} else { /* EOF */
nread = -1;
}
}
if (buf != stackBuf) {
free(buf); /* 失敗釋放內存 */
}
return nread;
}我們繼續看看IO_Read的實現,是個宏定義
#define IO_Read handleRead
handleRead有兩種實現
solaris實現:
// /jdk/src/solaris/native/java/io/io_util_md.c
ssize_t
handleRead(FD fd, void *buf, jint len)
{
ssize_t result;
RESTARTABLE(read(fd, buf, len), result);
return result;
}
/*
* Retry the operation if it is interrupted
*/
#define RESTARTABLE(_cmd, _result) do { \
do { \
_result = _cmd; \
} while((_result == -1) && (errno == EINTR)); \ /* 如果是中斷,則不斷重試,避免進程調度等待*/
} while(0)read方法可以參考unix man page
windows實現:
// jdk/src/windows/native/java/io/io_util_md.c
JNIEXPORT
jint
handleRead(FD fd, void *buf, jint len)
{
DWORD read = 0;
BOOL result = 0;
HANDLE h = (HANDLE)fd;
if (h == INVALID_HANDLE_VALUE) {
return -1;
}
result = ReadFile(h, /* File handle to read */
buf, /* address to put data */
len, /* number of bytes to read */
&read, /* number of bytes read */
NULL); /* no overlapped struct */
if (result == 0) {
int error = GetLastError();
if (error == ERROR_BROKEN_PIPE) {
return 0; /* EOF */
}
return -1;
}
return (jint)read;
}3.java異常初探
// jdk/src/share/native/common/jni_util.c
/**
* Throw a Java exception by name. Similar to SignalError.
*/
JNIEXPORT void JNICALL
JNU_ThrowByName(JNIEnv *env, const char *name, const char *msg)
{
jclass cls = (*env)->FindClass(env, name);
if (cls != 0) /* Otherwise an exception has already been thrown */
(*env)->ThrowNew(env, cls, msg); /* 調用JNI 接口*/
}
/* JNU_Throw common exceptions */
JNIEXPORT void JNICALL
JNU_ThrowNullPointerException(JNIEnv *env, const char *msg)
{
JNU_ThrowByName(env, "java/lang/NullPointerException", msg);
}最后是調用JNI:
// hotspot/src/share/vm/prims/jni.h
jint ThrowNew(jclass clazz, const char *msg) {
return functions->ThrowNew(this, clazz, msg);
}
jint (JNICALL *ThrowNew)
(JNIEnv *env, jclass clazz, const char *msg);4.總結
很多高級語言,有著不同的編程范式,但是歸根到底還是(c語言)系統調用,c語言能夠在更低的層面做非常多的優化。如果我們了解了這些底層的系統調用,就能看到問題的本質。
到此這篇關于詳解Java的readBytes是怎么實現的的文章就介紹到這了,更多相關Java readBytes內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
SpringBoot 2.0 整合sharding-jdbc中間件實現數據分庫分表
這篇文章主要介紹了SpringBoot 2.0 整合sharding-jdbc中間件,實現數據分庫分表,本文圖文并茂給大家介紹的非常詳細,具有一定的參考借鑒價值 ,需要的朋友可以參考下2019-06-06
Spring Security中的 @PreAuthorize 注解使用方法和示例代碼
@PreAuthorize是SpringSecurity中用于方法級權限控制的重要注解,本文詳細介紹了@PreAuthorize的使用方法,通過合理使用@PreAuthorize,可以實現細粒度的權限控制,確保應用程序的安全性,感興趣的朋友跟隨小編一起看看吧2026-01-01
SpringBoot集成jersey打包jar找不到class的處理方法
這篇文章主要介紹了SpringBoot集成jersey打包jar找不到class的處理方法,文中通過代碼示例介紹的非常詳細,對大家的學習或工作有一定的幫助,需要的朋友可以參考下2024-03-03
JAVA如何判斷上傳文件后綴名是否符合規范MultipartFile
這篇文章主要介紹了JAVA判斷上傳文件后綴名是否符合規范MultipartFile,文中通過實例代碼介紹了java實現對上傳文件做安全性檢查,需要的朋友可以參考下2023-11-11
Spring Boot 中使用 Drools 規則引擎的完整步驟
規則引擎主要用于將業務邏輯從應用程序代碼中分離出來,提高系統的靈活性和可維護性,規則引擎通過預定義的規則來處理輸入數據并做出相應的決策,從而實現業務邏輯的自動化和動態調整,本文給大家介紹Spring Boot中使用 Drools 規則引擎的指南,感興趣的朋友一起看看吧2025-04-04

