Spring中ApplicationEvent事件機制源碼詳解
一、ApplicationEvent應用
先定義一個 Event : ScorpiosEvent ,繼承 ApplicationEvent
public class ScorpiosEvent extends ApplicationEvent {
private String msg;
public ScorpiosEvent(Object source,String message) {
super(source);
this.msg = message;
}
public String getMsg() {
return msg;
}
public void setMsg(String msg) {
this.msg = msg;
}
}定義兩個 Listener : ScorpiosListener 、 TestListener 。要加上 @Componen t注解,讓 Spring 容器管理。
// ScorpiosListener
@Component
public class ScorpiosListener implements ApplicationListener {
@Override
public void onApplicationEvent(ApplicationEvent event) {
if(event instanceof ScorpiosEvent){
System.out.println("ScorpiosEvent ..." + ((ScorpiosEvent) event).getMsg());
}else{
System.out.println("ScorpiosEvent....dododododododododo");
}
}
}// TestListener
@Component
public class TestListener implements ApplicationListener {
@Override
public void onApplicationEvent(ApplicationEvent event) {
if(event instanceof ScorpiosEvent){
System.out.println("TestListener ..." + ((ScorpiosEvent) event).getMsg());
}else{
System.out.println("TestListener....tttttttttttttttttttttt");
}
}
}入口函數
public static void main( String[] args )
{
AnnotationConfigApplicationContext ac = new AnnotationConfigApplicationContext();
ac.register(AppConfig.class);
ac.refresh();
ScorpiosEvent scorpiosEvent = new ScorpiosEvent("scorpios","aaaaaaaaaa");
ac.publishEvent(scorpiosEvent);
}
上面就是 Event 的具體的一個應用, Listener 要被 Spring 容器管理。
從上面的代碼調用和日志可以看到,只要調用一個發布事件 ac.publishEvent(scorpiosEvent) ,所有的 Listener 都會被調用。注意,是所有的Listener,后面源碼分析。
從上面的輸出日志中可以看出, ScorpiosListener 、 TestListener 監聽器都被調用了兩次,可代碼里,明明就調用了一次啊,為什么 System.out.println("ScorpiosEvent....dododododododododo") 這行代碼也會被輸出呢?這是為什么呢?下面就來分析下 Spring 事件機制的源碼吧。
二、ApplicationEvent源碼分析
Spring 的事件機制采用的是觀察者設計模式
1. Listener監聽器的注冊過程
下面首先來了解下 Listener 監聽器是何時被添加到 Spring 容器中的, Listener 被掃描后具體是存放在哪里的?下面先看一下 Spring 中大名鼎鼎的 refresh() 方法,如果對這個方法不了解,可以看下我對 Spring 源碼解析的其他文章。
public void refresh() throws BeansException, IllegalStateException {
synchronized (this.startupShutdownMonitor) {
// 準備工作,包括設置啟動時間,是否激活標識位,初始化屬性源(property source)配置
prepareRefresh();
// 返回一個factory 為什么需要返回一個工廠? 因?yàn)橐獙?duì)工廠進行初始化
ConfigurableListableBeanFactory beanFactory = obtainFreshBeanFactory();
// 準備工廠
prepareBeanFactory(beanFactory);
try {
// 這個方法在當前版本的spring是沒用任何代碼的,可能spring期待在后面的版本中去擴展吧
postProcessBeanFactory(beanFactory);
// 調用BeanFactoryPostProcessors的后置處理器
// 在Spring環境中去執行已經被注冊的FactoryProcessors
// 設置執行自定義的ProcessorBeanFactory和Spring內部自己定義的
invokeBeanFactoryPostProcessors(beanFactory);
//-------------------到此spring工廠完成創建工作--------------------------
// 注冊BeanPostProcessor后置處理器
registerBeanPostProcessors(beanFactory);
initMessageSource();
// 初始化應用事件廣播器
initApplicationEventMulticaster();
onRefresh();
// 注冊監聽器
registerListeners();
// 實例化單實例非懶加載的Bean
finishBeanFactoryInitialization(beanFactory);
// 此處會發布一個事件:ContextRefreshedEvent
finishRefresh();
}
}
}主要看下面這四個方法:
- initApplicationEventMulticaster()
- registerListeners()
- finishBeanFactoryInitialization(beanFactory)
- finishRefresh()
注意:在上面這四個方法執行之前,Spring的組件掃描工作已經結束了,但Bean實例化還沒有。
2. initApplicationEventMulticaster()
此方法的作用是初始化應用事件廣播器,這個廣播器是干嘛的呢?說的直白點,里面存放了所有的 Listener
protected void initApplicationEventMulticaster() {
ConfigurableListableBeanFactory beanFactory = getBeanFactory();
// 工廠里是否包含 “applicationEventMulticaster” Bean
if (beanFactory.containsLocalBean(APPLICATION_EVENT_MULTICASTER_BEAN_NAME)) {
this.applicationEventMulticaster =
beanFactory.getBean(APPLICATION_EVENT_MULTICASTER_BEAN_NAME, ApplicationEventMulticaster.class);
} else {
// 沒有的話,Spring自己創建一個SimpleApplicationEventMulticaster
this.applicationEventMulticaster = new SimpleApplicationEventMulticaster(beanFactory);
// 將自己創建的SimpleApplicationEventMulticaster放到Spring容器中,
// name 為:applicationEventMulticaster
beanFactory.registerSingleton(APPLICATION_EVENT_MULTICASTER_BEAN_NAME, this.applicationEventMulticaster);
}
}
}此處是Spring自己創建了一個 SimpleApplicationEventMulticaster ,放入到 Spring 容器中,看斷點圖。

3. registerListeners()
此方法里面是從 Spring 容器中,拿到實現了 ApplicationListener 接口的所有 BeanName ,然后把它們名字添加到廣播器中的 this.defaultRetriever.applicationListenerBeans 中
protected void registerListeners() {
// 注冊靜態指定的監聽器,沒有
for (ApplicationListener<?> listener : getApplicationListeners()) {
getApplicationEventMulticaster().addApplicationListener(listener);
}
// 從Spring容器中拿到所有實現了ApplicationListener接口的類,此處能拿到我們添加的兩個Listener
String[] listenerBeanNames = getBeanNamesForType(ApplicationListener.class, true, false);
for (String listenerBeanName : listenerBeanNames) {
// 獲取上面創建的ApplicationEventMulticaster廣播器,把listenerBeanName放到廣播器中的
// this.defaultRetriever.applicationListenerBeans這個集合中,注意此處是放的是listenerBeanName
getApplicationEventMulticaster().addApplicationListenerBean(listenerBeanName);
}
Set<ApplicationEvent> earlyEventsToProcess = this.earlyApplicationEvents;
this.earlyApplicationEvents = null;
if (earlyEventsToProcess != null) {
for (ApplicationEvent earlyEvent : earlyEventsToProcess) {
getApplicationEventMulticaster().multicastEvent(earlyEvent);
}
}
}
4. finishBeanFactoryInitialization()
此方法就是實例化單例非懶加載的 Bean 。這個方法就不具體介紹了, Spring 源碼分析的其他文章中有詳細介紹。這地方給個斷點圖吧,看看執行到此方法時, Spring 容器中有哪些 Bean 。

從上面的斷點圖中可以看出, ScorpiosListener 、 TestListener 兩個 Listener 已經被掃描到,但還沒有被實例化,所以下面會進行它們的實例化操作。那么這兩個Listener是怎么被保存到廣播器 ApplicationEventMulticaster 中的呢?答案是通過 ApplicationListenerDetector 這個 BeanPostProcessor 后置處理器。
// ApplicationListenerDetector類
public Object postProcessAfterInitialization(Object bean, String beanName) {
// 判斷當前的Bean是不是實現了ApplicationListener接口
// 這兩個ScorpiosListener、TestListener肯定是的啊
// 此處的Bean已經實例化好了
if (bean instanceof ApplicationListener) {
Boolean flag = this.singletonNames.get(beanName);
if (Boolean.TRUE.equals(flag)) {
// 將這個實現了ApplicationListener接口的Bean放到廣播器的
// this.defaultRetriever.applicationListeners屬性中
this.applicationContext.addApplicationListener((ApplicationListener<?>) bean);
} else if (Boolean.FALSE.equals(flag)) {
this.singletonNames.remove(beanName);
}
}
return bean;
}// AbstractApplicationContext類中方法
public void addApplicationListener(ApplicationListener<?> listener) {
if (this.applicationEventMulticaster != null) {
this.applicationEventMulticaster.addApplicationListener(listener);
}
this.applicationListeners.add(listener);
}
// AbstractApplicationEventMulticaster類中方法
public void addApplicationListener(ApplicationListener<?> listener) {
synchronized (this.retrievalMutex) {
Object singletonTarget = AopProxyUtils.getSingletonTarget(listener);
if (singletonTarget instanceof ApplicationListener) {
this.defaultRetriever.applicationListeners.remove(singletonTarget);
}
// 將listener放到廣播器的屬性中了?。。。?!
this.defaultRetriever.applicationListeners.add(listener);
this.retrieverCache.clear();
}
}
上面是 Listener 實例化和最終保存在哪里的源碼分析,下面要看一下,發布事件是怎么觸發監聽器的調用的呢?
5. finishRefresh()
在此方法中, Spring 發布了一個事件: ContextRefreshedEvent 。
protected void finishRefresh() {
clearResourceCaches();
initLifecycleProcessor();
getLifecycleProcessor().onRefresh();
// 發布事件,就關注這一個方法!?。?!
publishEvent(new ContextRefreshedEvent(this));
LiveBeansView.registerApplicationContext(this);
}下面來看一下這個 publishEvent() 方法
protected void publishEvent(Object event, @Nullable ResolvableType eventType) {
ApplicationEvent applicationEvent;
// 判斷這個event是不是ApplicationEvent實例
if (event instanceof ApplicationEvent) {
applicationEvent = (ApplicationEvent) event;
} else {
applicationEvent = new PayloadApplicationEvent<>(this, event);
if (eventType == null) {
eventType = ((PayloadApplicationEvent<?>) applicationEvent).getResolvableType();
}
}
if (this.earlyApplicationEvents != null) {
this.earlyApplicationEvents.add(applicationEvent);
} else {
// 拿到廣播器,然后調用廣播器的multicastEvent()方法
getApplicationEventMulticaster().multicastEvent(applicationEvent, eventType);
}
if (this.parent != null) {
if (this.parent instanceof AbstractApplicationContext) {
((AbstractApplicationContext) this.parent).publishEvent(event, eventType);
} else {
this.parent.publishEvent(event);
}
}
}AbstractApplicationContext 類中的 getApplicationEventMulticaster() 方法
// 此方法拿到之前創建的廣播器applicationEventMulticaster
// 還記得是什么類型的嘛?對,是它:SimpleApplicationEventMulticaster
ApplicationEventMulticaster getApplicationEventMulticaster() throws IllegalStateException {
if (this.applicationEventMulticaster == null) {
// 拋異常代碼略
}
return this.applicationEventMulticaster;
}SimpleApplicationEventMulticaster 廣播器中的 multicastEvent() 方法
public void multicastEvent(final ApplicationEvent event, @Nullable ResolvableType eventType) {
ResolvableType type = (eventType != null ? eventType : resolveDefaultEventType(event));
Executor executor = getTaskExecutor();
// 此getApplicationListeners(event, type)方法就是拿到廣播器里面的所有Listener
for (ApplicationListener<?> listener : getApplicationListeners(event, type)) {
if (executor != null) {
executor.execute(() -> invokeListener(listener, event));
} else {
// 調用監聽器的方法?。。?!
invokeListener(listener, event);
}
}
}
protected void invokeListener(ApplicationListener<?> listener, ApplicationEvent event) {
ErrorHandler errorHandler = getErrorHandler();
if (errorHandler != null) {
doInvokeListener(listener, event);
} else {
// 參數傳入的是listener,終于開始調用了?。。?!
doInvokeListener(listener, event);
}
}
private void doInvokeListener(ApplicationListener listener, ApplicationEvent event) {
try {
// 調用Listener中僅有的onApplicationEvent()方法?。?!
listener.onApplicationEvent(event);
} catch (ClassCastException ex) {
// 拋異常代碼略
}
}終于分析完了。這里是 Spring 自己發布的一個 Event ,所以會走到 ScorpiosListener 、 TestListener 兩個監聽器里面的else代碼,打印 System.out.println("ScorpiosEvent....dododododododododo") , System.out.println("TestListener....tttttttttttttttttttttt") 這兩行代碼。

當執行到 ac.publishEvent(scorpiosEvent) 這行代碼發布 Event 事件時,廣播器又會去調用所有的 Listener ,所以會有這兩行代 System.out.println("ScorpiosEvent ..." + ((ScorpiosEvent) event).getMsg()) 碼的輸出?。?!

三、 小結
Spring 中事件機制使用的是觀察者設計模式,其中對應觀察者的四個角色分別為:
- 事件Event: ApplicationEvent 是所有事件對象的父類。 ApplicationEvent 繼承自 JDK 中的 EventObject ,所有的事件都需要繼承 ApplicationEvent ,并且通過 source 得到事件源
Spring 也為我們提供了很多內置事件, ContextRefreshedEvent 、 ContextStartedEvent 、 ContextStoppedEvent 、 ContextClosedEvent 、 RequestHandledEvent 。
- 事件監聽器: ApplicationListener ,也就是觀察者,繼承自 JDK 的 EventListener ,該類中只有一個方法 onApplicationEvent() ,當監聽的事件發生后該方法會被執行
- 事件源: ApplicationContext , ApplicationContext 是 Spring 中的核心容器,在事件監聽中 ApplicationContext 可以作為事件的發布者,也就是事件源。因?yàn)?ApplicationContext繼承自 ApplicationEventPublisher。在 ApplicationEventPublisher中定義了事件發布的方法:publishEvent(Object event)
- 事件管理:ApplicationEventMulticaster,用于事件監聽器的注冊和事件的廣播。監聽器的注冊就是通過它來實現的,它的作用是把 Applicationcontext發布的 Event廣播給它的監聽器列表。 因?yàn)樗锩媸治账斜O(jiān)聽器。
Spring中的事件模型是一種簡單的、粗粒度的監聽模型,當有一個事件到達時,所有的監聽器都會接收到,并且作出響應,如果希望只針對某些類型進行監聽,需要在代碼中進行控制。
當ApplicationContext接收到事件后,事件的廣播是Spring內部給我們做的,其實在Spring讀包掃描之后,將所有實現ApplicationListener的Bean找出來,注冊為容器的事件監聽器。當接收到事件的 時候,Spring會逐個調用事件監聽器。
到此這篇關于Spring中ApplicationEvent事件機制源碼詳解的文章就介紹到這了,更多相關ApplicationEvent事件機制源碼內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
java文件操作代碼片斷實例實現統計文件中字母出現的個數功能
本文介紹java讀文件實例,實現統計某一目錄下每個文件中出現的字母個數、數字個數、空格個數及行數,除此之外沒有其他字符,大家參考使用吧2014-01-01
SpringBoot超詳細講解@Enable*注解和@Import
這篇文章主要介紹了SpringBoot?@Enable*注解和@Import,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2022-07-07
SpringMVC自定義消息轉換器的使用其實很簡單
這篇文章主要介紹了SpringMVC自定義消息轉換器的使用方式,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2024-07-07
java如何從地址串中解析提取省市區(完美匹配中國所有地址)
這篇文章主要給大家介紹了關于java如何從地址串中解析提取省市區的相關資料,通過這個方法可以完美匹配中國所有地址,文中通過示例代碼介紹的非常詳細,需要的朋友可以參考下2022-07-07
Java按照List內存儲的對象的某個字段進行排序的實例
下面小編就為大家?guī)硪黄狫ava按照List內存儲的對象的某個字段進行排序的實例。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2016-12-12
Java開發學習 Java數組操作工具
這篇文章主要為大家詳細介紹了自己編寫的Java數組操作工具,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-04-04
Java Web 實現QQ登錄功能一個帳號同一時間只能一個人登錄
對于一個帳號在同一時間只能一個人登錄,下文給大家介紹的非常詳細,對java web qq 登錄功能感興趣的朋友一起看看吧2016-11-11

