druid?return行為方法源碼示例解析

更新時間：2023年09月26日 09:21:17 作者：codecraft

這篇文章主要為大家介紹了druid?return行為源碼示例解析,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪

序

本文主要研究一下druid的return行為

close

com/alibaba/druid/pool/DruidPooledConnection.java

@Override
    public void close() throws SQLException {
        if (this.disable) {
            return;
        }
        DruidConnectionHolder holder = this.holder;
        if (holder == null) {
            if (dupCloseLogEnable) {
                LOG.error("dup close");
            }
            return;
        }
        DruidAbstractDataSource dataSource = holder.getDataSource();
        boolean isSameThread = this.getOwnerThread() == Thread.currentThread();
        if (!isSameThread) {
            dataSource.setAsyncCloseConnectionEnable(true);
        }
        if (dataSource.isAsyncCloseConnectionEnable()) {
            syncClose();
            return;
        }
        if (!CLOSING_UPDATER.compareAndSet(this, 0, 1)) {
            return;
        }
        try {
            for (ConnectionEventListener listener : holder.getConnectionEventListeners()) {
                listener.connectionClosed(new ConnectionEvent(this));
            }
            List<Filter> filters = dataSource.getProxyFilters();
            if (filters.size() > 0) {
                FilterChainImpl filterChain = new FilterChainImpl(dataSource);
                filterChain.dataSource_recycle(this);
            } else {
                recycle();
            }
        } finally {
            CLOSING_UPDATER.set(this, 0);
        }
        this.disable = true;
    }

close方法先從holder獲取當前的dataSource，然后判斷ownerThread，若不是同一個線程則設置asyncCloseConnectionEnable為true，若asyncCloseConnectionEnable為true則執行syncClose(這里語義貌似相反)，否則執行recycle方法

syncClose

com/alibaba/druid/pool/DruidPooledConnection.java

public void syncClose() throws SQLException {
        lock.lock();
        try {
            if (this.disable || CLOSING_UPDATER.get(this) != 0) {
                return;
            }
            DruidConnectionHolder holder = this.holder;
            if (holder == null) {
                if (dupCloseLogEnable) {
                    LOG.error("dup close");
                }
                return;
            }
            if (!CLOSING_UPDATER.compareAndSet(this, 0, 1)) {
                return;
            }
            for (ConnectionEventListener listener : holder.getConnectionEventListeners()) {
                listener.connectionClosed(new ConnectionEvent(this));
            }
            DruidAbstractDataSource dataSource = holder.getDataSource();
            List<Filter> filters = dataSource.getProxyFilters();
            if (filters.size() > 0) {
                FilterChainImpl filterChain = new FilterChainImpl(dataSource);
                filterChain.dataSource_recycle(this);
            } else {
                recycle();
            }
            this.disable = true;
        } finally {
            CLOSING_UPDATER.set(this, 0);
            lock.unlock();
        }
    }

syncClose方法主要是加鎖執行recycle

recycle

public void recycle() throws SQLException {
        if (this.disable) {
            return;
        }
        DruidConnectionHolder holder = this.holder;
        if (holder == null) {
            if (dupCloseLogEnable) {
                LOG.error("dup close");
            }
            return;
        }
        if (!this.abandoned) {
            DruidAbstractDataSource dataSource = holder.getDataSource();
            dataSource.recycle(this);
        }
        this.holder = null;
        conn = null;
        transactionInfo = null;
        closed = true;
    }

recycle方法主要是執行dataSource.recycle(this)

DruidDataSource.recycle

com/alibaba/druid/pool/DruidDataSource.java

protected void recycle(DruidPooledConnection pooledConnection) throws SQLException {
        final DruidConnectionHolder holder = pooledConnection.holder;
        if (holder == null) {
            LOG.warn("connectionHolder is null");
            return;
        }
        if (logDifferentThread //
                && (!isAsyncCloseConnectionEnable()) //
                && pooledConnection.ownerThread != Thread.currentThread()//
        ) {
            LOG.warn("get/close not same thread");
        }
        final Connection physicalConnection = holder.conn;
        if (pooledConnection.traceEnable) {
            Object oldInfo = null;
            activeConnectionLock.lock();
            try {
                if (pooledConnection.traceEnable) {
                    oldInfo = activeConnections.remove(pooledConnection);
                    pooledConnection.traceEnable = false;
                }
            } finally {
                activeConnectionLock.unlock();
            }
            if (oldInfo == null) {
                if (LOG.isWarnEnabled()) {
                    LOG.warn("remove abandonded failed. activeConnections.size " + activeConnections.size());
                }
            }
        }
        final boolean isAutoCommit = holder.underlyingAutoCommit;
        final boolean isReadOnly = holder.underlyingReadOnly;
        final boolean testOnReturn = this.testOnReturn;
        try {
            // check need to rollback?
            if ((!isAutoCommit) && (!isReadOnly)) {
                pooledConnection.rollback();
            }
            // reset holder, restore default settings, clear warnings
            boolean isSameThread = pooledConnection.ownerThread == Thread.currentThread();
            if (!isSameThread) {
                final ReentrantLock lock = pooledConnection.lock;
                lock.lock();
                try {
                    holder.reset();
                } finally {
                    lock.unlock();
                }
            } else {
                holder.reset();
            }
            if (holder.discard) {
                return;
            }
            if (phyMaxUseCount > 0 && holder.useCount >= phyMaxUseCount) {
                discardConnection(holder);
                return;
            }
            if (physicalConnection.isClosed()) {
                lock.lock();
                try {
                    if (holder.active) {
                        activeCount--;
                        holder.active = false;
                    }
                    closeCount++;
                } finally {
                    lock.unlock();
                }
                return;
            }
            if (testOnReturn) {
                boolean validate = testConnectionInternal(holder, physicalConnection);
                if (!validate) {
                    JdbcUtils.close(physicalConnection);
                    destroyCountUpdater.incrementAndGet(this);
                    lock.lock();
                    try {
                        if (holder.active) {
                            activeCount--;
                            holder.active = false;
                        }
                        closeCount++;
                    } finally {
                        lock.unlock();
                    }
                    return;
                }
            }
            if (holder.initSchema != null) {
                holder.conn.setSchema(holder.initSchema);
                holder.initSchema = null;
            }
            if (!enable) {
                discardConnection(holder);
                return;
            }
            boolean result;
            final long currentTimeMillis = System.currentTimeMillis();
            if (phyTimeoutMillis > 0) {
                long phyConnectTimeMillis = currentTimeMillis - holder.connectTimeMillis;
                if (phyConnectTimeMillis > phyTimeoutMillis) {
                    discardConnection(holder);
                    return;
                }
            }
            lock.lock();
            try {
                if (holder.active) {
                    activeCount--;
                    holder.active = false;
                }
                closeCount++;
                result = putLast(holder, currentTimeMillis);
                recycleCount++;
            } finally {
                lock.unlock();
            }
            if (!result) {
                JdbcUtils.close(holder.conn);
                LOG.info("connection recyle failed.");
            }
        } catch (Throwable e) {
            holder.clearStatementCache();
            if (!holder.discard) {
                discardConnection(holder);
                holder.discard = true;
            }
            LOG.error("recyle error", e);
            recycleErrorCountUpdater.incrementAndGet(this);
        }
    }
    boolean putLast(DruidConnectionHolder e, long lastActiveTimeMillis) {
        if (poolingCount >= maxActive || e.discard || this.closed) {
            return false;
        }
        e.lastActiveTimeMillis = lastActiveTimeMillis;
        connections[poolingCount] = e;
        incrementPoolingCount();
        if (poolingCount > poolingPeak) {
            poolingPeak = poolingCount;
            poolingPeakTime = lastActiveTimeMillis;
        }
        notEmpty.signal();
        notEmptySignalCount++;
        return true;
    }

recycle方法先執行DruidConnectionHolder的reset方法，之后針對大于等于phyMaxUseCount的場景執行discardConnection；針對testOnReturn為true，則執行testConnectionInternal校驗，校驗失敗則關閉連接；最后加鎖執行putLast把連接放回連接池，若歸還失敗則關閉連接。

小結

close方法先從holder獲取當前的dataSource，然后判斷ownerThread，若不是同一個線程則設置asyncCloseConnectionEnable為true，若asyncCloseConnectionEnable為true則執行syncClose(這里語義貌似相反)，否則執行recycle方法。

以上就是druid return行為源碼示例解析的詳細內容，更多關于druid return行為的資料請關注腳本之家其它相關文章！

您可能感興趣的文章: