C++實現獲取指定代碼段的cpu占用
更新時間：2023年12月28日 10:24:52 作者：BuffaloX_X
這篇文章主要為大家詳細介紹了C++實現獲取指定代碼段的cpu占用的相關知識,文中的示例代碼講解詳細,具有一定的借鑒價值,有需要的小伙伴可以參考一下
windows
#include <iostream>
#include <windows.h>
#include <vector>
class CodeSegmentCPUMonitor {
public:
static CodeSegmentCPUMonitor& getInstance() {
static CodeSegmentCPUMonitor instance;
return instance;
}
~CodeSegmentCPUMonitor() {
// 獲取結束性能計數器值
QueryPerformanceCounter(&endCounter);
// 計算運行時間（秒）
double elapsedTime = static_cast<double>(endCounter.QuadPart - startCounter.QuadPart) / frequency.QuadPart;
// 計算 CPU 平均占用
double averageCPUUsage = (totalCycles / elapsedTime) * 100.0 / processorSpeed;
std::cout << "Total Average CPU Usage: " << averageCPUUsage << "%\n";
}
void enterCodeSegment() {
// 進入代碼段時記錄開始時間
QueryPerformanceCounter(&codeSegmentStartCounter);
}
void exitCodeSegment() {
// 退出代碼段時記錄結束時間
QueryPerformanceCounter(&codeSegmentEndCounter);
// 計算代碼段的 CPU 占用
ULONGLONG codeSegmentCycles = codeSegmentEndCounter.QuadPart - codeSegmentStartCounter.QuadPart;
totalCycles += codeSegmentCycles;
}
private:
LARGE_INTEGER frequency;
LARGE_INTEGER startCounter;
LARGE_INTEGER endCounter;
LARGE_INTEGER codeSegmentStartCounter;
LARGE_INTEGER codeSegmentEndCounter;
ULONGLONG totalCycles = 0;
// 假設處理器速度為 2.5 GHz，你需要根據實際情況調整這個值
const double processorSpeed = 2.5e9;
CodeSegmentCPUMonitor() {
// 獲取性能計數器頻率
if (QueryPerformanceFrequency(&frequency)) {
// 獲取初始性能計數器值
QueryPerformanceCounter(&startCounter);
} else {
std::cerr << "Failed to get performance counter frequency.\n";
}
}
// 禁用拷貝構造函數和賦值運算符
CodeSegmentCPUMonitor(const CodeSegmentCPUMonitor&) = delete;
CodeSegmentCPUMonitor& operator=(const CodeSegmentCPUMonitor&) = delete;
};
int main() {
// Example: Measure CPU usage for code segment 1
{
CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
// Your code segment 1 here
CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
}
// Example: Measure CPU usage for code segment 2
{
CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
// Your code segment 2 here
CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
}
// ... Add more code segments as needed ...
return 0;
}
linux
#include <iostream>
#include <vector>
#include <ctime>
class CodeSegmentCPUMonitor {
public:
static CodeSegmentCPUMonitor& getInstance() {
static CodeSegmentCPUMonitor instance;
return instance;
}
~CodeSegmentCPUMonitor() {
// 獲取結束時間
struct timespec endTime;
clock_gettime(CLOCK_MONOTONIC, &endTime);
// 計算運行時間（秒）
double elapsedTime = static_cast<double>(endTime.tv_sec - startTime.tv_sec) +
static_cast<double>(endTime.tv_nsec - startTime.tv_nsec) / 1e9;
// 計算 CPU 平均占用
double averageCPUUsage = (totalCycles / elapsedTime) * 100.0 / processorSpeed;
std::cout << "Total Average CPU Usage: " << averageCPUUsage << "%\n";
}
void enterCodeSegment() {
// 進入代碼段時記錄開始時間
clock_gettime(CLOCK_MONOTONIC, &codeSegmentStartTime);
}
void exitCodeSegment() {
// 退出代碼段時記錄結束時間
struct timespec codeSegmentEndTime;
clock_gettime(CLOCK_MONOTONIC, &codeSegmentEndTime);
// 計算代碼段的 CPU 占用
double codeSegmentElapsedTime = static_cast<double>(codeSegmentEndTime.tv_sec - codeSegmentStartTime.tv_sec) +
static_cast<double>(codeSegmentEndTime.tv_nsec - codeSegmentStartTime.tv_nsec) / 1e9;
totalCycles += codeSegmentElapsedTime;
}
private:
struct timespec startTime;
struct timespec codeSegmentStartTime;
double totalCycles = 0;
// 假設處理器速度為 2.5 GHz，你需要根據實際情況調整這個值
const double processorSpeed = 2.5e9;
CodeSegmentCPUMonitor() {
// 獲取初始時間
clock_gettime(CLOCK_MONOTONIC, &startTime);
}
// 禁用拷貝構造函數和賦值運算符
CodeSegmentCPUMonitor(const CodeSegmentCPUMonitor&) = delete;
CodeSegmentCPUMonitor& operator=(const CodeSegmentCPUMonitor&) = delete;
};
int main() {
// Example: Measure CPU usage for code segment 1
{
CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
// Your code segment 1 here
CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
}
// Example: Measure CPU usage for code segment 2
{
CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
// Your code segment 2 here
CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
}
// ... Add more code segments as needed ...
return 0;
}linux和windows條件編譯
#include <iostream>
#ifdef _WIN32
#include <windows.h>
#else
#include <ctime>
#endif
class CodeSegmentCPUMonitor {
public:
static CodeSegmentCPUMonitor& getInstance() {
static CodeSegmentCPUMonitor instance;
return instance;
}
~CodeSegmentCPUMonitor() {
#ifdef _WIN32
FILETIME endTime;
GetSystemTimeAsFileTime(&endTime);
ULARGE_INTEGER endTime64;
endTime64.LowPart = endTime.dwLowDateTime;
endTime64.HighPart = endTime.dwHighDateTime;
double elapsedTime = static_cast<double>(endTime64.QuadPart - startTime.QuadPart) / frequency.QuadPart;
#else
struct timespec endTime;
clock_gettime(CLOCK_MONOTONIC, &endTime);
double elapsedTime = static_cast<double>(endTime.tv_sec - startTime.tv_sec) +
static_cast<double>(endTime.tv_nsec - startTime.tv_nsec) / 1e9;
#endif
double averageCPUUsage = (totalCycles / elapsedTime) * 100.0 / processorSpeed;
std::cout << "Total Average CPU Usage: " << averageCPUUsage << "%\n";
}
void enterCodeSegment() {
#ifdef _WIN32
GetSystemTimeAsFileTime(&codeSegmentStartTime);
#else
clock_gettime(CLOCK_MONOTONIC, &codeSegmentStartTime);
#endif
}
void exitCodeSegment() {
#ifdef _WIN32
FILETIME codeSegmentEndTime;
GetSystemTimeAsFileTime(&codeSegmentEndTime);
ULARGE_INTEGER codeSegmentEndTime64;
codeSegmentEndTime64.LowPart = codeSegmentEndTime.dwLowDateTime;
codeSegmentEndTime64.HighPart = codeSegmentEndTime.dwHighDateTime;
double codeSegmentElapsedTime = static_cast<double>(codeSegmentEndTime64.QuadPart - codeSegmentStartTime.QuadPart) / frequency.QuadPart;
#else
struct timespec codeSegmentEndTime;
clock_gettime(CLOCK_MONOTONIC, &codeSegmentEndTime);
double codeSegmentElapsedTime = static_cast<double>(codeSegmentEndTime.tv_sec - codeSegmentStartTime.tv_sec) +
static_cast<double>(codeSegmentEndTime.tv_nsec - codeSegmentStartTime.tv_nsec) / 1e9;
#endif
totalCycles += codeSegmentElapsedTime;
}
private:
#ifdef _WIN32
LARGE_INTEGER frequency;
LARGE_INTEGER startTime;
FILETIME codeSegmentStartTime;
#else
struct timespec startTime;
struct timespec codeSegmentStartTime;
#endif
double totalCycles = 0;
const double processorSpeed = 2.5e9;
CodeSegmentCPUMonitor() {
#ifdef _WIN32
QueryPerformanceFrequency(&frequency);
QueryPerformanceCounter(&startTime);
#else
clock_gettime(CLOCK_MONOTONIC, &startTime);
#endif
}
CodeSegmentCPUMonitor(const CodeSegmentCPUMonitor&) = delete;
CodeSegmentCPUMonitor& operator=(const CodeSegmentCPUMonitor&) = delete;
};
int main() {
// Example: Measure CPU usage for code segment 1
{
CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
// Your code segment 1 here
CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
}
// Example: Measure CPU usage for code segment 2
{
CodeSegmentCPUMonitor::getInstance().enterCodeSegment();
// Your code segment 2 here
CodeSegmentCPUMonitor::getInstance().exitCodeSegment();
}
// ... Add more code segments as needed ...
return 0;
}解耦log接口的形式1
#include <iostream>
#include <string>
// CPU Monitor Output Interface
class CPUMonitorOutputInterface {
public:
virtual ~CPUMonitorOutputInterface() {}
virtual void log(const std::string& message) = 0;
};
// ConsoleLogger: 實現CPUMonitorOutputInterface的一個Logger類示例
class ConsoleLogger : public CPUMonitorOutputInterface {
public:
void log(const std::string& message) override {
std::cout << "Logger: " << message << std::endl;
}
};
class CodeSegmentCPUMonitor {
public:
CodeSegmentCPUMonitor(CPUMonitorOutputInterface& logger) : logger(logger) {
#ifdef _WIN32
QueryPerformanceFrequency(&frequency);
QueryPerformanceCounter(&startTime);
#else
clock_gettime(CLOCK_MONOTONIC, &startTime);
#endif
}
~CodeSegmentCPUMonitor() {
#ifdef _WIN32
FILETIME endTime;
GetSystemTimeAsFileTime(&endTime);
ULARGE_INTEGER endTime64;
endTime64.LowPart = endTime.dwLowDateTime;
endTime64.HighPart = endTime.dwHighDateTime;
double elapsedTime = static_cast<double>(endTime64.QuadPart - startTime.QuadPart) / frequency.QuadPart;
#else
struct timespec endTime;
clock_gettime(CLOCK_MONOTONIC, &endTime);
double elapsedTime = static_cast<double>(endTime.tv_sec - startTime.tv_sec) +
static_cast<double>(endTime.tv_nsec - startTime.tv_nsec) / 1e9;
#endif
double averageCPUUsage = (totalCycles / elapsedTime) * 100.0 / processorSpeed;
logger.log("Total Average CPU Usage: " + std::to_string(averageCPUUsage) + "%");
}
void enterCodeSegment() {
#ifdef _WIN32
GetSystemTimeAsFileTime(&codeSegmentStartTime);
#else
clock_gettime(CLOCK_MONOTONIC, &codeSegmentStartTime);
#endif
}
void exitCodeSegment() {
#ifdef _WIN32
FILETIME codeSegmentEndTime;
GetSystemTimeAsFileTime(&codeSegmentEndTime);
ULARGE_INTEGER codeSegmentEndTime64;
codeSegmentEndTime64.LowPart = codeSegmentEndTime.dwLowDateTime;
codeSegmentEndTime64.HighPart = codeSegmentEndTime.dwHighDateTime;
double codeSegmentElapsedTime = static_cast<double>(codeSegmentEndTime64.QuadPart - codeSegmentStartTime.QuadPart) / frequency.QuadPart;
#else
struct timespec codeSegmentEndTime;
clock_gettime(CLOCK_MONOTONIC, &codeSegmentEndTime);
double codeSegmentElapsedTime = static_cast<double>(codeSegmentEndTime.tv_sec - codeSegmentStartTime.tv_sec) +
static_cast<double>(codeSegmentEndTime.tv_nsec - codeSegmentStartTime.tv_nsec) / 1e9;
#endif
totalCycles += codeSegmentElapsedTime;
}
private:
CPUMonitorOutputInterface& logger;
#ifdef _WIN32
LARGE_INTEGER frequency;
LARGE_INTEGER startTime;
FILETIME codeSegmentStartTime;
#else
struct timespec startTime;
struct timespec codeSegmentStartTime;
#endif
double totalCycles = 0;
const double processorSpeed = 2.5e9;
};
int main() {
// Example: Measure CPU usage for code segment 1 with ConsoleLogger
{
ConsoleLogger consoleLogger;
CodeSegmentCPUMonitor monitor(consoleLogger);
monitor.enterCodeSegment();
// Your code segment 1 here
monitor.exitCodeSegment();
}
// Example: Measure CPU usage for code segment 2 with ConsoleLogger
{
ConsoleLogger consoleLogger;
CodeSegmentCPUMonitor monitor(consoleLogger);
monitor.enterCodeSegment();
// Your code segment 2 here
monitor.exitCodeSegment();
}
// ... Add more code segments as needed ...
return 0;
}到此這篇關于C++實現獲取指定代碼段的cpu占用的文章就介紹到這了,更多相關C++獲取cpu占用內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
在用VC開發應用程序時，經常會要做一些可以改變大小的對話框，而這個時候就要求對話框上的控件會隨著對話框大小的改變而改變自己的位置和大小。下面我們就來探討下在MFC中如何改變控件大小和位置2015-06-06
這篇文章主要為大家詳細介紹了C++Smart Pointer 智能指針，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下，希望能夠給你帶來幫助2022-03-03
這篇文章主要介紹了如何使用Qt框架實現一個簡單的計算器應用,我們將使用C++編程語言和Qt的圖形用戶界面庫來開發這個應用,并展示如何實現基本的算術操作,希望對大家有所幫助2023-11-11
這篇文章主要為大家詳細介紹了C++實現Huffman的編解碼，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2020-04-04
文件編譯時出現multiple definition of ''xxxxxx''的具體解決方法
以下是對文件編譯時出現multiple definition of 'xxxxxx'的解決方法進行了詳細的分析介紹，如也遇到此問題的朋友們可以過來參考下2013-07-07
本文主要介紹C語言 文件的基礎知識，這里整理了相關資料及示例代碼，有興趣的小伙伴可以參考下2016-08-08
這篇文章主要給大家介紹了關于在C程序中處理UTF-8文本的相關資料，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面來一起看看吧。2017-11-11
這篇文章主要介紹了C++滑動窗口詳解(優選算法),本文通過圖文實例相結合給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友參考下吧2025-06-06
本文主要講解C語言 數據類型,這里整理了詳細的數據類型的資料,希望能幫助剛剛開始學習C語言的同學2016-08-08
if語句是指編程語言,包括c語言、C#、VB、java、匯編語言等,下面這篇文章主要給大家介紹了關于c語言中if語句是怎么變成匯編代碼的相關資料,需要的朋友可以參考下2021-11-11