快捷導航

如何使用java代碼獲取JVM信息

更新時間：2025年04月14日 09:00:53 作者：香吧香

這篇文章主要介紹了使用java代碼獲取JVM信息的相關操作代碼,代碼簡單易懂,感興趣的朋友一起看看吧

轉載請注明出處：

最近在環境中定位服務問題，由于服務使用的docker部署的，且使用的docker鏡像，在啟動之后，容器內沒有jdk相關的工具【jstat、jmap等等】；于是采用在項目中使用java類獲取jvm相關信息，以下是測試的示例：

import java.lang.management.ManagementFactory;  
import java.lang.management.MemoryMXBean;  
import java.lang.management.MemoryUsage;  
import java.lang.management.GarbageCollectorMXBean;  
import java.lang.management.MemoryPoolMXBean;  
import java.lang.management.ThreadMXBean;  
import java.util.List;  
public class GCInfoDemo {  
    public static void main(String[] args) {  
        // 獲取內存管理 bean  
        MemoryMXBean memoryMXBean = ManagementFactory.getMemoryMXBean();  
        MemoryUsage heapMemoryUsage = memoryMXBean.getHeapMemoryUsage();  
        MemoryUsage nonHeapMemoryUsage = memoryMXBean.getNonHeapMemoryUsage();  
        // 打印內存信息  
        System.out.println("Heap Memory Usage:");  
        System.out.println("  Init: " + heapMemoryUsage.getInit() / (1024 * 1024) + " MB");  
        System.out.println("  Used: " + heapMemoryUsage.getUsed() / (1024 * 1024) + " MB");  
        System.out.println("  Committed: " + heapMemoryUsage.getCommitted() / (1024 * 1024) + " MB");  
        System.out.println("  Max: " + heapMemoryUsage.getMax() / (1024 * 1024) + " MB");  
        System.out.println("\nNon-Heap Memory Usage:");  
        System.out.println("  Init: " + nonHeapMemoryUsage.getInit() / (1024 * 1024) + " MB");  
        System.out.println("  Used: " + nonHeapMemoryUsage.getUsed() / (1024 * 1024) + " MB");  
        System.out.println("  Committed: " + nonHeapMemoryUsage.getCommitted() / (1024 * 1024) + " MB");  
        System.out.println("  Max: " + nonHeapMemoryUsage.getMax() / (1024 * 1024) + " MB");  
        // 獲取垃圾回收回收器 bean 的列表  
        List<GarbageCollectorMXBean> gcBeans = ManagementFactory.getGarbageCollectorMXBeans();  
        System.out.println("\nGarbage Collectors:");  
        for (GarbageCollectorMXBean gcBean : gcBeans) {  
            System.out.println("  Name: " + gcBean.getName());  
            System.out.println("  Number of collections: " + gcBean.getCollectionCount());  
            System.out.println("  Total time spent in collections: " + gcBean.getCollectionTime() + " ms");  
        }  
        // 打印內存池信息  
        System.out.println("\nMemory Pools:");  
        for (MemoryPoolMXBean memoryPool : ManagementFactory.getMemoryPoolMXBeans()) {  
            System.out.println("  Name: " + memoryPool.getName());  
            System.out.println("  Usage: " + memoryPool.getUsage());  
        }  
        // 獲取線程管理 bean  
        ThreadMXBean threadMXBean = ManagementFactory.getThreadMXBean();  
        // 獲取所有線程 ID  
        long[] threadIds = threadMXBean.getAllThreadIds();  
        System.out.println("\nThreads Information:");  
        for (long threadId : threadIds) {  
            System.out.println("  Thread ID: " + threadId);  
            System.out.println("  Thread Name: " + threadMXBean.getThreadInfo(threadId).getThreadName());  
            System.out.println("  Thread State: " + threadMXBean.getThreadInfo(threadId).getThreadState());  
        }  
        // 檢查死鎖線程  
        long[] deadlockedThreads = threadMXBean.findDeadlockedThreads();  
        if (deadlockedThreads != null) {  
            System.out.println("\nDeadlocked Threads:");  
            for (long deadlockedThreadId : deadlockedThreads) {  
                System.out.println("  Deadlocked Thread ID: " + deadlockedThreadId);  
                System.out.println("  Thread Name: " + threadMXBean.getThreadInfo(deadlockedThreadId).getThreadName());  
            }  
        } else {  
            System.out.println("\nNo deadlocked threads found.");  
        }  
    }  
}

獲取GC信息
- 通過ManagementFactory.getGarbageCollectorMXBeans()獲取所有垃圾回收器的監控Bean。
- 每個GarbageCollectorMXBean提供：
  - getName()：GC算法名稱（如G1 Young Generation）
  - getCollectionCount()：回收次數
  - getCollectionTime()：累計耗時（毫秒）

2.打印當前線程信息：

- 使用 ThreadMXBean 獲取當前線程的所有 ID，并通過 getThreadInfo 方法獲取每個線程的信息，包括線程名字和狀態。

3.檢查死鎖線程：

- 使用 findDeadlockedThreads 方法檢查 JVM 中的死鎖情況。如果有死鎖線程，則輸出這些線程的 ID 和名稱。如果沒有，則輸出相應的消息。

Heap Memory Usage:
  Init: 508 MB
  Used: 10 MB
  Committed: 487 MB
  Max: 7205 MB
Non-Heap Memory Usage:
  Init: 2 MB
  Used: 4 MB
  Committed: 7 MB
  Max: 0 MB
Garbage Collectors:
  Name: PS Scavenge
  Number of collections: 0
  Total time spent in collections: 0 ms
  Name: PS MarkSweep
  Number of collections: 0
  Total time spent in collections: 0 ms
Memory Pools:
  Name: Code Cache
  Usage: init = 2555904(2496K) used = 1235968(1207K) committed = 2555904(2496K) max = 251658240(245760K)
  Name: Metaspace
  Usage: init = 0(0K) used = 3597432(3513K) committed = 4980736(4864K) max = -1(-1K)
  Name: Compressed Class Space
  Usage: init = 0(0K) used = 392584(383K) committed = 524288(512K) max = 1073741824(1048576K)
  Name: PS Eden Space
  Usage: init = 133169152(130048K) used = 10914704(10658K) committed = 133169152(130048K) max = 2789212160(2723840K)
  Name: PS Survivor Space
  Usage: init = 22020096(21504K) used = 0(0K) committed = 22020096(21504K) max = 22020096(21504K)
  Name: PS Old Gen
  Usage: init = 355467264(347136K) used = 0(0K) committed = 355467264(347136K) max = 5666504704(5533696K)
Threads Information:
  Thread ID: 6
  Thread Name: Monitor Ctrl-Break
  Thread State: RUNNABLE
  Thread ID: 5
  Thread Name: Attach Listener
  Thread State: RUNNABLE
  Thread ID: 4
  Thread Name: Signal Dispatcher
  Thread State: RUNNABLE
  Thread ID: 3
  Thread Name: Finalizer
  Thread State: WAITING
  Thread ID: 2
  Thread Name: Reference Handler
  Thread State: WAITING
  Thread ID: 1
  Thread Name: main
  Thread State: RUNNABLE
No deadlocked threads found.
Process finished with exit code 0

到此這篇關于使用java代碼獲取JVM信息的文章就介紹到這了,更多相關使用java代碼獲取JVM信息內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: