#!/usr/bin/env python
# -*- coding: utf-8 -*-
 
"""
IP端口掃描程序
輸入IP地址，掃描該IP哪些端口對外是開放的，輸出端口列表
"""
 
import socket
import sys
import concurrent.futures
import ipaddress
from tabulate import tabulate
import time
 
def is_valid_ip(ip):
    """
    驗證IP地址是否有效
    """
    try:
        ipaddress.ip_address(ip)
        return True
    except ValueError:
        return False
 
def scan_port(ip, port, timeout=1):
    """
    掃描單個端口是否開放
    
    參數:
        ip (str): 目標IP地址
        port (int): 要掃描的端口
        timeout (float): 連接超時時間(秒)
        
    返回:
        bool: 如果端口開放返回True，否則返回False
    """
    try:
        # 創建TCP套接字
        sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
        sock.settimeout(timeout)
        
        # 嘗試連接
        result = sock.connect_ex((ip, port))
        
        # 關閉套接字
        sock.close()
        
        # 如果連接成功，端口是開放的
        return result == 0
    
    except (socket.error, socket.timeout, OSError):
        return False
 
def scan_ports(ip, port_range=None, max_workers=100):
    """
    掃描IP地址的多個端口
    
    參數:
        ip (str): 目標IP地址
        port_range (tuple): 端口范圍，格式為(起始端口, 結束端口)
        max_workers (int): 最大并發線程數
        
    返回:
        list: 開放端口列表
    """
    if port_range is None:
        # 默認掃描常見端口
        port_range = (1, 1024)
    
    start_port, end_port = port_range
    open_ports = []
    total_ports = end_port - start_port + 1
    
    print(f"開始掃描 {ip} 的端口 {start_port}-{end_port}...")
    start_time = time.time()
    
    # 使用線程池進行并發掃描
    with concurrent.futures.ThreadPoolExecutor(max_workers=max_workers) as executor:
        # 創建掃描任務
        future_to_port = {
            executor.submit(scan_port, ip, port): port 
            for port in range(start_port, end_port + 1)
        }
        
        # 處理完成的任務
        completed = 0
        for future in concurrent.futures.as_completed(future_to_port):
            port = future_to_port[future]
            completed += 1
            
            # 顯示進度
            if completed % 100 == 0 or completed == total_ports:
                progress = (completed / total_ports) * 100
                elapsed = time.time() - start_time
                print(f"進度: {completed}/{total_ports} ({progress:.1f}%) - 已用時間: {elapsed:.1f}秒", end="\r")
            
            try:
                if future.result():
                    open_ports.append(port)
                    print(f"\n發現開放端口: {port}")
            except Exception as e:
                print(f"\n掃描端口 {port} 時出錯: {e}")
    
    print(f"\n掃描完成! 總用時: {time.time() - start_time:.1f}秒")
    return open_ports
 
def display_open_ports(ip, open_ports):
    """
    顯示開放端口列表
    """
    if not open_ports:
        print(f"\n{ip} 沒有發現開放的端口")
        return
    
    # 嘗試獲取常見端口的服務名稱
    port_info = []
    for port in sorted(open_ports):
        try:
            service = socket.getservbyport(port)
        except (socket.error, OSError):
            service = "未知"
        
        port_info.append([port, service])
    
    # 顯示表格
    print(f"\n{ip} 的開放端口:")
    headers = ["端口", "可能的服務"]
    print(tabulate(port_info, headers=headers, tablefmt="grid"))
 
def main():
    """
    主函數
    """
    # 獲取用戶輸入
    if len(sys.argv) > 1:
        target_ip = sys.argv[1]
    else:
        target_ip = input("請輸入要掃描的IP地址: ")
    
    # 驗證IP地址
    if not is_valid_ip(target_ip):
        print(f"錯誤: '{target_ip}' 不是有效的IP地址")
        sys.exit(1)
    
    # 獲取端口范圍
    try:
        custom_range = input("請輸入要掃描的端口范圍 (格式: 起始端口-結束端口) [默認: 1-1024]: ")
        if custom_range:
            start, end = map(int, custom_range.split('-'))
            if start < 1 or end > 65535 or start > end:
                raise ValueError
            port_range = (start, end)
        else:
            port_range = (1, 1024)
    except ValueError:
        print("錯誤: 無效的端口范圍，使用默認范圍 1-1024")
        port_range = (1, 1024)
    
    # 掃描端口
    open_ports = scan_ports(target_ip, port_range)
    
    # 顯示結果
    display_open_ports(target_ip, open_ports)
 
if __name__ == "__main__":
    try:
        main()
    except KeyboardInterrupt:
        print("\n\n掃描被用戶中斷")
        sys.exit(0)
    except Exception as e:
        print(f"\n程序執行出錯: {e}")
        sys.exit(1)

#coding:utf-8
import sys,os,time,subprocess
import MySQLdb
import re,urllib2
import ConfigParser
from IPy import IP
import xml.etree.ElementTree as ET
nowtime = time.strftime('%Y-%m-%d',time.localtime(time.time()))
configpath=r'c:portscanconfig.ini'
#傳入api接口主路徑,遍歷獲取所有的ip列表，用IPy模塊格式成127.0.0.1/24的格式
def getiplist(ipinf):
serverarea=['tj101','tj103','dh','dx']
iplist=[]
for area in serverarea:
ipapi=urllib2.urlopen(ipinf+area).read()
for ip in ipapi.split('n'):
#判斷如果ip列表不為空，轉換成ip/網關格式,再格式化成ip/24的格式
if ip:
ip=ip.replace('_','/')
ip=(IP(ip))
iplist.append(str(ip))
ipscan(iplist,nmapathx)
#傳遞ip地址文件和nmap路徑
def ipscan(iplist,nmapath):
#古老的去重，對ip文件中的ip地址進行去重
newiplist=[]
scaniplist=[]
for ip in iplist:
if ip not in newiplist:
newiplist.append(ip)
#遍歷所有ip段，批量掃描，生成xml格式報告
for ip in newiplist:
filename=nowtime+ip.split('/')[0]+'.xml'
filepath=r"c:portscanscanres\"
nmapcmd=nmapath+' -PT '+ip.strip('rn')+' -oX '+filepath+filename
os.system(nmapcmd)
scaniplist.append(ip)
writeinmysql(scaniplist)
#入庫模塊是某大嬸發寫好的給我 我只是簡單修改了哈，主要是xml.etree.ElementTree模塊。
def writeinmysql(scaniplist):
filepath=r"c:portscanscanres"
for ip in scaniplist:
xmlfile=filepath+'\'+ip+'.xml'
#縮進哈 發文章的時候臨時改的，懶得縮進了
root=ET.parse(xmlfile).getroot()
allhost=root.findall('host')
conn=MySQLdb.connect(host='10.5.10.57',user='nxadmin',passwd='nxadmin.com',port=3306,db='scandb',charset='utf8')
cur= conn.cursor()
for host in allhost:
address = host.find('address')
#首先判斷端口是不是open的，如果是再進行入庫
for port in host.find('ports').findall('port'):
if port.find('state').attrib['state']=="open":
ip=address.attrib['addr']
portval=port.attrib['portid']
state=port.find('state').attrib['state']
sql = "INSERT INTO portscan (ip,port,state) VALUES(%s,%s,%s)"
params=[ip,portval,state]
cur.execute(sql,params)
conn.commit()
cur.close()
conn.close()
if __name__=="__main__":
#讀取配置文件中要掃描的IP apiurl和nmap安裝文件路徑
config=ConfigParser.ConfigParser()
config.readfp(open(configpath,'rb'))
nmapathx=config.get('nmap','nmapath')
ipinf=config.get('ip','ipinf')
getiplist(ipinf)

def ping_ip(ip_fex):
    # 掃描范圍: 128~254
    for i in range(128, 255):
        ip = f'{ip_fex}.{i}'
        print(f'\r{ip}', end='')
        output = os.popen(f'ping -n 1 -w 100 {ip} | findstr TTL=').read()
        if len(output) > 0:
            print(f"\n{ip} online")

if __name__ == '__main__':
	ping_ip('192.168.110')

def ip_thread(start, ip_fex):
    for i in range(start, start + 20):
        ip = f'{ip_fex}.{i}'  # 目標ip
        try:
            pkg = ARP(psrc=f'{ip_fex}.1', pdst=ip) # 偽造ARP廣播
            reply = sr1(pkg, timeout=1, verbose=False) # 發送ARP并獲取響應包
            if reply:
                print(f'\n{ip}->{reply[ARP].hwsrc}') # 顯示MAC地址
            else:
                print(f'\r{ip} ...', end='')
        except Exception as e:
            print(e)

def ip_scan(ip_fex):
	# 關閉警告
    import logging
    logging.getLogger("scapy.runtime").setLevel(logging.ERROR)
	# 端口范圍 1~254
    for i in range(1, 255, 20): 
        threading.Thread(target=ip_thread, args=(i, ip_fex)).start()

def scan_port(ip):
    for port in range(22, 100):
        try:
            pkg = IP(src='192.168.112.123', dst=ip) / TCP(dport=port, flags='S')
            reply = sr1(pkg, timeout=1, verbose=False)
            if reply:
                if reply[TCP].flags == 0x12: # SYN-ACK
                    print(f'port->[{port}]')
        except Exception as e:
            print(e)