在Docker容器已經創建后，需要添加新的端口映射，即對已經存在的Docker容器添加新的端口映射，可以通過以下步驟來添加，即通過修改配置文件的方法。

Windows 10 下 Dockers容器的配置文件修改步驟：

1、先找到要修改的容器hash值：

docker inspect 容器名稱

2、然后退出docker Desktop服務

（因?yàn)樵诰€狀態配置文件修改保存不了）

3、資源管理器中打開最新安裝的Docker的配置文件的路徑：

\\wsl$\docker-desktop-data\data\docker\containers\[容器hash值] win11一般為： \\wsl.localhost\docker-desktop-data\data\docker\containers\[容器hash值]

4、修改配置文件

打開后修改其中的 config.v2.json 和 hostconfig.json

config.v2.json有兩處需要添加，只修改一處，是不行的：

位置1：

"ExposedPorts":{"20/tcp":{},"21/tcp":{},"22/tcp":{},"3306/tcp":{},"443/tcp":{},"6379/tcp":{},"80/tcp":{},"8081/tcp":{},"8082/tcp":{},"8083/tcp":{},"8084/tcp":{},"888/tcp":{},"8888/tcp":{},"9501/tcp":{},"9502/tcp":{}} 

位置2：

"Ports":{"20/tcp":[{"HostIp":"0.0.0.0","HostPort":"1020"}],"21/tcp":[{"HostIp":"0.0.0.0","HostPort":"1021"}],"22/tcp":[{"HostIp":"0.0.0.0","HostPort":"1022"}],"3306/tcp":[{"HostIp":"0.0.0.0","HostPort":"13306"}],"443/tcp":[{"HostIp":"0.0.0.0","HostPort":"10443"}],"6379/tcp":[{"HostIp":"0.0.0.0","HostPort":"16379"}],"80/tcp":null,"8081/tcp":[{"HostIp":"0.0.0.0","HostPort":"8081"}],"8082/tcp":[{"HostIp":"0.0.0.0","HostPort":"8082"}],"8083/tcp":[{"HostIp":"0.0.0.0","HostPort":"8083"}],"8084/tcp":[{"HostIp":"0.0.0.0","HostPort":"8084"}],"888/tcp":[{"HostIp":"0.0.0.0","HostPort":"888"}],"8888/tcp":[{"HostIp":"0.0.0.0","HostPort":"8888"}],"9501/tcp":[{"HostIp":"0.0.0.0","HostPort":"9501"}],"9502/tcp":[{"HostIp":"0.0.0.0","HostPort":"9502"}]} 

hostconfig.json 有一處：

"PortBindings":{"20/tcp":[{"HostIp":"","HostPort":"1020"}],"21/tcp":[{"HostIp":"","HostPort":"1021"}],"22/tcp":[{"HostIp":"","HostPort":"1022"}],"3306/tcp":[{"HostIp":"","HostPort":"13306"}],"443/tcp":[{"HostIp":"","HostPort":"10443"}],"6379/tcp":[{"HostIp":"","HostPort":"16379"}],"8081/tcp":[{"HostIp":"","HostPort":"8081"}],"8082/tcp":[{"HostIp":"","HostPort":"8082"}],"8083/tcp":[{"HostIp":"","HostPort":"8083"}],"8084/tcp":[{"HostIp":"","HostPort":"8084"}],"888/tcp":[{"HostIp":"","HostPort":"888"}],"8888/tcp":[{"HostIp":"","HostPort":"8888"}],"9501/tcp":[{"HostIp":"","HostPort":"9501"}],"9502/tcp":[{"HostIp":"","HostPort":"9502"}]} 

5、啟動Docker Desktop服務：

點擊容器名稱 - 點擊 Imspect 即可查看到映射的端口列表

補充知識：如何給運行中的docker容器增加映射端口

命令行操作

#1、查看容器的信息
docker ps -a
#2、查看容器的端口映射情況，在容器外執行：
docker port 容器ID 或者 docker port 容器名稱
#3、查找要修改容器的全I(xiàn)D
docker inspect 容器ID |grep Id
#4、進到/var/lib/docker/containers 目錄下找到與全 Id 相同的目錄，修改 其中的hostconfig.json 和 config.v2.json文件：
#注意：若該容器還在運行中，需要先停掉
docker stop 容器ID 或者 docker stop 容器名稱
#再停掉docker服務
systemctl stop docker
#可能會提示錯誤 Warning: Stopping docker.service, but it can still be activated by:
  docker.socket 不要管他 這是docker在關閉狀態下被訪問自動喚醒機制，很人性化，即這時再執行任意docker命令會直接啟動
#5、修改hostconfig.json如下
#	格式如："{容器內部端口}/tcp":[{"HostIp":"","HostPort":"映射的宿主機端口"}]
"PortBindings":{"22/tcp":[{"HostIp":"","HostPort":"3316"}],"80/tcp":[{"HostIp":"","HostPort":"801"}]}
#6、修改config.v2.json在ExposedPorts中加上要暴露的端口
#	兩個地方
"ExposedPorts":{"3306/tcp":{},"80/tcp":{}}"
"Ports":{"3306/tcp":[{"HostIp":"0.0.0.0","HostPort":"33061"}],"80/tcp":[{"HostIp":"","HostPort":"801"}]}"

最后改完之后，重啟docker服務就行了

systemctl restart docker

總結 

到此這篇關于Docker容器添加新端口映射的方法與詳細步驟的文章就介紹到這了,更多相關Docker容器添加新端口映射內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

最新評論