Tomcat出現假死原因及解決方法
1. 問題背景
線上環境因?yàn)橛袀€(gè)接口內部在錯誤的參數下,會不斷生成字符串,導致OOM,在OOM之后服務還能正常運行,但是發送的Api請求已經沒有辦法響應了。
2. 問題復現
模擬線上問題,在測試環境上進行復現,一段時間后服務會爆出OOM,但是不是每次都會導致Tomcat假死,有些情況下Tomcat還能正常訪問。
情況一:核心線程丟失
OOM之前Tomcat線程情況
| ID | 線程名稱 | Group |
|---|---|---|
| 125 | http-nio-9989-Acceptor-0 | main |
| 126 | http-nio-9989-AsyncTimeout | main |
| 123 | http-nio-9989-ClientPoller-0 | main |
| 124 | http-nio-9989-ClientPoller-1 | main |
| 113 | http-nio-9989-exec-1 | main |
OOM之后Tomcat線程情況
| ID | 線程名稱 | Group |
|---|---|---|
| 123 | http-nio-9989-ClientPoller-0 | main |
| 1431 | http-nio-9989-exec-103 | main |
情況二:服務重啟
日志打印java.lang.OutOfMemoryError: Java heap space后,服務重啟。
情況三:Tomcat后臺線程丟失
只有后臺線程丟失,但是Acceptor線程和Poller線程還存在

3. 假死情況
從Tomcat的NIO模型得知有幾個組件,Acceptor、Poller、業務線程池。這三個組件情況如下:
- Acceptor線程:該線程主要是監聽連接(socket.accept()),如果該線程掛掉,那么及時操作系統層面TCP3次握手成功,但是業務上也辦法獲取到這個連接。默認情況下,只有1個Acceptor線程,可以通過acceptorThreadCount參數設置。
- Poller線程:Acceptor獲取到連接之后,會輪詢從Poller列表中取一個Poller進行處理。如果Poller線程掛掉了,那么就沒法處理讀請求了。默認情況下,會有min(2,cpu核數)個Poller線程,可以通過pollerThreadCount參數設置。
- 業務線程:Poller線程將讀請求放到業務線程處理,如果業務線程阻塞(比如被某個網絡IO阻塞),那么此刻的讀請求還在業務線程池的隊列中,沒有被處理。默認情況下,最小線程為10,可以通過minSpareThreads參數設置,最大線程為200,可以通過maxThreads參數設置。
此時分析再結合復現的情況,如果核心線程掛掉,那確實存在假死情況。但是從事發現場來看,并沒有發現Tomcat的Acceptor、Poller線程打印出OutofMemoryError的異常,及時將org.apache.tomcat和org.apache.catalina設置成Debug級別。因此需要深入源碼分析。
4. 異常處理分析
4.1 Acceptor異常處理分析
Acceptor邏輯如下,就是在循環內不斷地監聽accept(),查看是否有新連接。
//NioEndpoint$Acceptor#run
protected class Acceptor extends AbstractEndpoint.Acceptor {
@Override
public void run() {
int errorDelay = 0;
// Loop until we receive a shutdown command
while (running) {
//...忽略一些代碼
state = AcceptorState.RUNNING;
try {
//if we have reached max connections, wait
countUpOrAwaitConnection();
SocketChannel socket = null;
try {
socket = serverSock.accept();
} catch (IOException ioe) {
}
// Successful accept, reset the error delay
errorDelay = 0;
// Configure the socket
if (running && !paused) {
// setSocketOptions() will hand the socket off to
// an appropriate processor if successful
if (!setSocketOptions(socket)) {
closeSocket(socket);
}
} else {
closeSocket(socket);
}
} catch (Throwable t) {
ExceptionUtils.handleThrowable(t);
log.error(sm.getString("endpoint.accept.fail"), t);
}
}
state = AcceptorState.ENDED;
}
//...忽略一些代碼
}
其中setSocketOptions是往Poller中調用register方法,把這個Socket傳遞過去。getPoller0()方法會以輪詢的策略獲取一個Poller
//NioEndpoint#setSocketOptions
protected boolean setSocketOptions(SocketChannel socket) {
// Process the connection
try {
//disable blocking, APR style, we are gonna be polling it
socket.configureBlocking(false);
Socket sock = socket.socket();
socketProperties.setProperties(sock);
NioChannel channel = nioChannels.pop();
if (channel == null) {
SocketBufferHandler bufhandler = new SocketBufferHandler(
socketProperties.getAppReadBufSize(),
socketProperties.getAppWriteBufSize(),
socketProperties.getDirectBuffer());
if (isSSLEnabled()) {
channel = new SecureNioChannel(socket, bufhandler, selectorPool, this);
} else {
channel = new NioChannel(socket, bufhandler);
}
} else {
channel.setIOChannel(socket);
channel.reset();
}
getPoller0().register(channel);
} catch (Throwable t) {
ExceptionUtils.handleThrowable(t);
try {
log.error("",t);
} catch (Throwable tt) {
ExceptionUtils.handleThrowable(tt);
}
// Tell to close the socket
return false;
}
return true;
}
此處重點看一下ExceptionUtils.handleThrowable方法的邏輯,因?yàn)镺utofMemoryError是VirtualMachineError的子類,所以這里會被直接拋出異常,。而OutofMemeoryError屬于 uncheck exception,拋出uncheck exception就會導致線程終止,并且主線程和其他線程無法感知這個線程拋出的異常。如果線程代碼(run方法之外)之外來捕獲這個異常的話,可以通過Thread的setUncaughtExceptionHandler處理。
//ExceptionUtils#handleThrowable
public static void handleThrowable(Throwable t) {
if (t instanceof ThreadDeath) {
throw (ThreadDeath) t;
}
if (t instanceof StackOverflowError) {
// Swallow silently - it should be recoverable
return;
}
if (t instanceof VirtualMachineError) {
throw (VirtualMachineError) t;
}
// All other instances of Throwable will be silently swallowed
}
再看啟動的時候,線程是否會設置uncaughtExceptionHandler,發現并沒有設置,所以異常沒法被正常打印到日志中。
//AbstractEndpoint#startAcceptorThreads
protected final void startAcceptorThreads() {
int count = getAcceptorThreadCount();
acceptors = new Acceptor[count];
for (int i = 0; i < count; i++) {
acceptors[i] = createAcceptor();
String threadName = getName() + "-Acceptor-" + i;
acceptors[i].setThreadName(threadName);
Thread t = new Thread(acceptors[i], threadName);
t.setPriority(getAcceptorThreadPriority());
t.setDaemon(getDaemon());
t.start();
}
}
小結:OutofMemoryError被捕獲了,然后重新拋出,但是因?yàn)镺utofMemoryError是uncheck exception,而線程沒有設置uncaughtExceptionHandler,所以沒法被打印。
4.2 增加全局異常捕獲
在啟動的時候,設置全局線程nncaughtException處理器。這里簡單打印線程名稱,并且拋出異常。
Thread.setDefaultUncaughtExceptionHandler(new Thread.UncaughtExceptionHandler() {
@Override
public void uncaughtException(Thread t, Throwable e) {
logger.error("[Global Handler]thread-name:{},happen exp,", t.getName(), e);
}
});
重新復現問題,發現Acceptor線程有打印異常情況。

不過,同時也發現,Poller線程有打印錯誤日志,但并不是全局處理器打印的。

下圖為Arthas截圖,發現仍然Poller線程仍然存在。因此再分析Poller的異常處理。

4.3 Poller異常處理
從上面的異常日志倆看,Poller線程是在處理PollerEvent中處理REGISTER事件時的拋出異常,查看相關代碼。發現此處捕獲的是Exception,而OutofMemoryError屬于Error,所以此處不會被捕獲到,并且會往上拋出。
//NioEndpoint$Poller#events
public void run() {
if (interestOps == OP_REGISTER) {
try {
socket.getIOChannel().register(
socket.getPoller().getSelector(), SelectionKey.OP_READ, socketWrapper);
} catch (Exception x) {
log.error(sm.getString("endpoint.nio.registerFail"), x);
}
}
//...
}
在Poller的events方法中,會循環調用PollerEvent的run方法,這里內部有捕獲一個Throwable,而Error是繼承Throwable。所以O(shè)utofMemoryError會在這里被捕獲,而且會打印日志,并且線程不會掛掉。
//NioEndpoint$Poller#events
public boolean events() {
boolean result = false;
PollerEvent pe = null;
for (int i = 0, size = events.size(); i < size && (pe = events.poll()) != null; i++ ) {
result = true;
try {
pe.run();
pe.reset();
if (running && !paused) {
eventCache.push(pe);
}
} catch ( Throwable x ) {
log.error("",x);
}
}
return result;
}
而在Poller的循環中,發現也有ExceptionUtils.handleThrowable處理,如果在這里出現OutofMemoryError異常的話,那么Poller線程將會被終止。
//NioEndpoint$Poller#run
public class Poller implements Runnable {
public void run() {
// Loop until destroy() is called
while (true) {
Boolean hasEvents = false;
try {
if (!close) {
hasEvents = events();
//....
}
}catch (Throwable x) {
ExceptionUtils.handleThrowable(x);
log.error("",x);
continue;
}
//...
}
}
}
小結:Poller內部實現中,對于異常處理不同,有些地方能捕獲異常并且Poller線程正常處理,有些地方?jīng)]有捕獲異常,可能會因?yàn)镺utofMemoryError導致線程終止
5. 結論
當應用程序出現OOM的時候,Tomcat核心線程有可能會掛掉,導致接口接口無法正常訪問,因此要盡量避免業務上出現OOM。此外,當出現OOM后應用無法訪問時,可以試著排查一下,是不是tomcat的核心線程掛掉導致。
以上就是Tomcat出現假死原因及解決方法的詳細內容,更多關于Tomcat假死的資料請關注腳本之家其它相關文章!
相關文章
解決Tomcat?Caused?by:?java.lang.ClassNotFoundException:?ja
這篇文章主要給大家介紹了如何解決Tomcat?Caused?by:?java.lang.ClassNotFoundException:?java.util.logging.Logger的問題,文中有詳細的原因分析及解決方法,需要的朋友可以參考下2023-10-10
Tomcat 啟動閃退常見問題18種解決方法及示例
Tomcat啟動閃退可能由多種原因引起,包括配置錯誤、資源限制、兼容性問題等,本文主要介紹了Tomcat 啟動閃退常見問題18種解決方法及示例,具有一定的參考價值,感興趣的可以了解一下2024-06-06
詳解tomcat 解決 POST請求傳參數過長受限制的問題
這篇文章主要介紹了詳解tomcat 解決 POST請求傳參數過長受限制的問題,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2018-08-08
Tomcat正常訪問localhost報404問題解決
這篇文章主要介紹了Tomcat正常訪問localhost報404問題解決,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2021-03-03
redission-tomcat快速實現從單機部署到多機部署詳解
這篇文章主要介紹了redission-tomcat快速實現從單機部署到多機部署詳解,本文介紹一個基于redis的tomcat session管理開源項目:redission-tomcat,可無代碼侵入式地快速實現session共享,需要的朋友可以參考下2019-06-06
使用IDEA配置tomcat及創建JSP文件的方法
這篇文章主要介紹了使用IDEA配置tomcat及創建JSP文件的方法,本文通過圖文并茂的形式給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-05-05
一個tomcat下部署多個項目的詳細步驟
一個tomcat下如何部署多個項目,Linux跟windows系統下的步驟都差不多,以下linux系統下部署為例,windows系統下部署同理,接下來小編就給大家詳細的介紹一下在一個tomcat下部署多個項目的操作步驟,需要的朋友可以參考下2023-08-08

