Kubernetes之Pod的調度實現方式

更新時間：2025年09月19日 10:10:40 作者：Hud.

Kubernetes通過定向調度（NodeName/NodeSelector）、親和性調度（NodeAffinity/PodAffinity/PodAntiAffinity）及污點容忍（Taints/Toleration）實現Pod節點控制,分別用于強制指定節點、優化部署位置和靈活管理節點準入,滿足不同場景下的調度需求

自動調度：運行在哪個節點上完全由Scheduler經過一系列的計算得出
定向調度：NodeName，NodeSelector
親和性調度：NodeAffinity、PodAffinity、PodAntiAffinity
污點（容忍）調度：Taints、Toleration

1、定向調度

定向調度，指的是利用在pod上聲明NodeName或者nodeSelector，以此將Pod調度到期望的node節點上，注意，這里的調度是強制的，這就意味著即使要調度的目標Node不存在，也會向上面進行調度，只不過pod運行失敗而已。

1.1 NodeName

NodeName用于強制約束將Pod調度到指定的Name的Node節點上。這種方式，其實就是直接跳過Scheduler的調度邏輯，直接寫入PodList列表。

接下來，就這個定向調度創建一個pod-nodename,yaml

apiVersion: v1
kind: Pod
metadata:
  name: pod-nodename
  namespace: dev
spec:
  containers:
  - name: nginx
    image: nginx:1.17.1
  nodeName: k8s-node1   # 指定調度到node1節點上去

# 創建Pod
[root@master ~]# vi pod-nodename.yaml
[root@master ~]# kubectl create -f pod-nodename.yaml
pod/pod-nodename created
#修改上面的文件再創建一個pod改到node2節點上去，看看效果
[root@master ~]# kubectl get pod -n dev -o wide
NAME            READY   STATUS    RESTARTS   AGE     IP               NODE        NOMINATED NODE   READINESS GATES
pod-nodename    1/1     Running   0          2m25s   10.244.36.91     k8s-node1   <none>           <none>
pod-nodename2   1/1     Running   0          5s      10.244.169.163   k8s-node2   <none>

對了，這里插一句，關于Node節點的名稱，你要查看可以使用命令：

[root@master ~]# kubectl get node
NAME        STATUS   ROLES                  AGE   VERSION
k8s-node1   Ready    <none>                 12d   v1.23.5
k8s-node2   Ready    <none>                 12d   v1.23.5
master      Ready    control-plane,master   12d   v1.23.5

如果我在yaml文件中將nodeName改成了k8s-node3，會不會創建成功呢？來試試看:

[root@master ~]# kubectl create -f pod-nodename.yaml
pod/pod-nodename2 created
[root@master ~]# kubectl get pod -n dev
NAME            READY   STATUS    RESTARTS   AGE
pod-nodename2   0/1     Pending   0          14s

1.2 NodeSelector

NodeSelector用于將pod調度到添加了指定標簽的node節點上，他是通過Kubernetes的label-selector機制實現的，也就是說在pod創建之前會由scheduler使用MatchNodeSelector調整策略進行l(wèi)abel匹配，找出目標node，然后將pod調度到目標節點，該匹配規則是強制約束。

通過一個小案例，熟悉一下操作：

① 首先分別為node節點添加標簽

[root@master ~]# kubectl label nodes k8s-node1 nodeenv=first
node/k8s-node1 labeled
[root@master ~]# kubectl label nodes k8s-node2 nodeenv=second
node/k8s-node2 labeled

② 創建一個pod-nodeselector.yaml文件，使用它來創建pod

apiVersion: v1
kind: Pod
metadata:
  name: pod-nodeselector
  namespace: dev
spec:
  containers:
  - name: nginx
    image: nginx:1.17.1
  nodeSelector:
    nodeenv: first   # 將pod調度到nodeenv=first的node上去

# 創建容器并查看是否被放在了指定的node節點上
[root@master ~]# vi pod-nodeselector.yaml
[root@master ~]# kubectl create -f pod-nodeselector.yaml
pod/pod-nodeselector created
[root@master ~]# kubectl get pod -n dev -o wide
NAME               READY   STATUS    RESTARTS   AGE   IP             NODE        NOMINATED NODE   READINESS GATES
pod-nodeselector   1/1     Running   0          19s   10.244.36.92   k8s-node1   <none>           <none>

2、親和性調度

定向調度雖然使用起來非常方便但是也有一定的問題，那就是如果沒有滿足條件的node，那么pod就不會運行，即使在集群中還有可用的node列表也不行，這也就限制了這種調度方式的可用場景。

基于這個問題，Kubernetes還提供了一種親和性調度（Affinity），他在nodeSelector的基礎上進行了擴展，可以通過配置的形式，實現優先選擇滿足條件的node進行調度，如果沒有，也可以調度到不滿足條件的節點上去，使得調度更加靈活：

Affinity主要分為三類：

NodeAffinity(Node親和性)：以node為目標，解決pod可以調度到哪些node的問題
podAffinity(pod親和性)：以pod為目標，解決pod可以和哪些已存在的pod部署在同一個拓?fù)溆蛑?/li>
podAntiAffinity(pod反親和性)：以pod為目標，解決pod不能和哪些已存在的pod部署在同一個拓?fù)溆蛑械膯?wèn)題

關于親和性（反親和性）使用場景的說明：

親和性：如果兩個應用頻繁交互，那就有必要利用親和性讓兩個應用盡可能的靠近，這樣可以減少因網絡通信帶來的性能損耗
反親和性：當應用采用多副本部署時，有必要采用反親和性讓各個應用實例打散分布在各個node節點上，這樣可以提高服務的高可用性

2.1 NodeAffinity的可選配置項

[root@master ~]# kubectl explain pod.spec.affinity.nodeAffinity
KIND:     Pod
VERSION:  v1
   # 優先調度到滿足指定規則的node，相當于軟限制(傾向)
   preferredDuringSchedulingIgnoredDuringExecution	<[]Object> 
    preference    #一個節點選擇器項，與相應的權重相關聯
    matchFields    #按節點字段列出的節點選擇器要求列表
    matchExpression    #按節點標簽列出的節點選擇器要求列表（推薦）
    key     #鍵
    value    #值
    operator    #關系符
    weight        #傾向權重，0~100之間
   #Node節點必須滿足指定的所有規則才可以，相當于硬限制
   requiredDuringSchedulingIgnoredDuringExecution	<Object>
    nodeSelectorTerms    #節點選擇列表
    matchFields    #按節點字段列出的節點選擇器要求列表
    matchExpression    #按節點標簽列出的節點選擇器要求列表（推薦）
    key     #鍵
    value    #值
    operator    #關系符

關系符的使用說明：

-matchExpression:
    -key: nodeenv        #匹配存在標簽的key為nodeenv的節點
     operator: Exists
    -key: nodeenv        #匹配標簽的key為nodeenv，且value是"xxx"或"yyy"的節點
     operator: In     
     values:["xxx","yyy"]
    -key:nodeenv         #匹配標簽的key為nodeenv且value大于"xxx"的節點
     operator: Gt
     values: "xxx"

先來演示一下 requiredDuringSchedulingIgnoredDuringExecution，創建pod-nodeaffinity-required.yaml

apiVersion: v1
kind: Pod
metadata:
  name: pod-nodeaffinity-required
  namespace: dev
spec:
  containers:
  - name: nginx
    image: nginx:1.17.1
  affinity:        # 親和性設置    
    nodeAffinity:     # 設置node親和性
      requiredDuringSchedulingIgnoredDuringExecution:   # 硬限制
        nodeSelectorTerms:
        - matchExpressions:   # 匹配env的值在["xxx","yyy"]中的標簽
          - key: nodeenv
            operator: In
            values: ["xxx","yyy"]

# 創建容器
[root@master ~]# kubectl create -f pod-nodeaffinity-required.yaml 
pod/pod-affinity-required created
# 先看看node的標簽
[root@master ~]# kubectl get node --show-labels
NAME        STATUS   ROLES                  AGE   VERSION   LABELS
k8s-node1   Ready    <none>                 12d   v1.23.5   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8s-node1,kubernetes.io/os=linux,nodeenv=first
k8s-node2   Ready    <none>                 12d   v1.23.5   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8s-node2,kubernetes.io/os=linux,nodeenv=second
master      Ready    control-plane,master   12d   v1.23.5   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=master,kubernetes.io/os=linux,node-role.kubernetes.io/control-plane=,node-role.kubernetes.io/master=,node.kubernetes.io/exclude-from-external-load-balancers=

現在的節點中，node1和node2的nodeenv標簽不存在xxx或者yyy，那么也就意味著這個pod應該是無法運行成功的

[root@master ~]# kubectl get pod -n dev
NAME                    READY   STATUS    RESTARTS   AGE
pod-affinity-required   0/1     Pending   0          5m4s

# 使用describe看看調度失敗的原因
[root@master ~]# kubectl describe pod pod-nodeaffinity-required -n dev
Events:
  Type     Reason            Age                 From               Message
  ----     ------            ----                ----               -------
  Warning  FailedScheduling  22s (x10 over 10m)  default-scheduler  0/3 nodes are available: 1 node(s) had taint {node-role.kubernetes.io/master: }, that the pod didn't tolerate, 2 node(s) didn't match Pod's node affinity/selector.

現在顯示是失敗，試試xxx改成first重新創建看看

[root@master ~]# vi pod-nodeaffinity-required.yaml 
[root@master ~]# kubectl create -f pod-nodeaffinity-required.yaml 
pod/pod-nodeaffinity-required created
[root@master ~]# kubectl get pod -n dev -o wide
NAME                        READY   STATUS    RESTARTS   AGE     IP             NODE        NOMINATED NODE   READINESS GATES
pod-nodeaffinity-required   1/1     Running   0          12s     10.244.36.93   k8s-node1   <none>           <none>

下面再來看看軟限制（requiredDuringSchedulingIgnoredDuringExecution）

創建pod-nodeaffinity-preferred.yaml

apiVersion: v1
kind: Pod
metadata:
  name: pod-nodeaffinity-preferred
  namespace: dev
spec:
  containers:
  - name: nginx
    image: nginx:1.17.1
  affinity:        # 親和性設置
    nodeAffinity:     # 設置node親和性
      preferredDuringSchedulingIgnoredDuringExecution:   # 軟限制
        - weight: 1
          preference:      # 匹配env的值在["xxx","yyy"]中的標簽(當前環境中沒有)
            matchExpressions:
            - key: nodeenv
              operator: In
              values: ["xxx","yyy"]
~ 

# 創建pod并查看
[root@master ~]# kubectl create -f pod-nodeaffinity-preferred.yaml 
pod/pod-nodeaffinity-preferred created
[root@master ~]# kubectl get pod -n dev -o wide
NAME                         READY   STATUS    RESTARTS   AGE    IP               NODE        NOMINATED NODE   READINESS GATES
pod-nodeaffinity-preferred   1/1     Running   0          119s   10.244.169.164   k8s-node2   <none>           <none>

調度親和性只在調度過程中生效，調度完成后即使node的標簽發生了改變，也不理你了。

2.2 PodAffinity的可選配置項

[root@master ~]# kubectl explain pod.spec.affinity.podAffinity
FIELDS:
  # 軟限制 
   requiredDuringSchedulingIgnoredDuringExecution	<[]Object>
    namespace        # 指定參照pod的namespace
    topologyKey      # 指定調度作用域
    labelSelector    # 標簽選擇器
      matchExpressions:
        key    # 鍵
        values    # 值
        operator  # 關系符
        matchlabels      # 指多個matchExpressions映射的內容
  # 軟限制
     preferredDuringSchedulingIgnoredDuringExecution	<[]Object>
        namespace        # 指定參照pod的namespace
        topologyKey      # 指定調度作用域
        labelSelector    # 標簽選擇器
          matchExpressions:
            key    # 鍵
            values    # 值
            operator  # 關系符
            matchlabels      # 指多個matchExpressions映射的內容
          weight     # 權重

topologyKey用于指定調度時作用域，例如：

如果指定為Kubernetes.io/hostname，那就是以node節點為區分范圍
如果指定為beta.kubernetes.io/os，則以node節點的操作系統類型來區分

1）先創建一個參照的pod，pod-podaffinity-target.yaml

apiVersion: v1
kind: Pod
metadata:
  name: pod-podaffinity-target
  namespace: dev
  labels:        # 設置標簽
    podenv:  target
spec:
  containers:
  - name: nginx
    image: nginx:1.17.1
  nodeName: k8s-node1   # 部署到node1上面

#創建并查看pod
[root@master ~]# vi pod-podaffinity-target.yaml
[root@master ~]# kubectl create -f pod-podaffinity-target.yaml 
pod/pod-podaffinity-target created
[root@master ~]# kubectl get pod -n dev
NAME                     READY   STATUS    RESTARTS   AGE
pod-podaffinity-target   1/1     Running   0          9s

2）創建pod-podaffinity-required.yaml

apiVersion: v1
kind: Pod
metadata:
  name: pod-nodeaffinity-preferred
  namespace: dev
spec:
  containers:
  - name: nginx
    image: nginx:1.17.1
  affinity:        # 親和性設置
    podAffinity:     # 設置pod親和性
      requiredDuringSchedulingIgnoredDuringExecution:   # 硬限制
        - labelSelector:
            matchExpressions:      # 匹配env的值在["xxx","yyy"]中的標簽
            - key: nodeenv
              operator: In
              values: ["xxx","yyy"]
           topologyKey: kubernetes.io/hostname  # 如果找不到，調度到目標pod同一個節點上

# 創建并查看
[root@master ~]# kubectl create -f pod-podaffinity-required.yaml 
pod/pod-podaffinity-required created
[root@master ~]# kubectl get pod -n dev -o wide
NAME                       READY   STATUS    RESTARTS   AGE   IP             NODE        NOMINATED NODE   READINESS GATES
pod-podaffinity-required   0/1     Pending   0          8s    <none>         <none>      <none>           <none>
pod-podaffinity-target     1/1     Running   0          14m   10.244.36.94   k8s-node1   <none>           <none>
[root@master ~]# kubectl describe pod pod-podaffinity-required -n dev
Events:
  Type     Reason            Age                 From               Message
  ----     ------            ----                ----               -------
  Warning  FailedScheduling  13s (x2 over 101s)  default-scheduler  0/3 nodes are available: 1 node(s) had taint {node-role.kubernetes.io/master: }, that the pod didn't tolerate, 2 node(s) didn't match pod affinity rules.

有一個節點上有污點（taint）---主節點

2.3 podAntiAffinity 反親和性案例

還是將剛才設置的target作為參照，反親和這個pod那應該被調度到node2上

apiVersion: v1
kind: Pod
metadata:
  name: pod-podantiaffinity-required
  namespace: dev
spec:
  containers:
  - name: nginx
    image: nginx:1.17.1
  affinity:        # 親和性設置
    podAntiAffinity:     # 設置pod反親和性
      requiredDuringSchedulingIgnoredDuringExecution:   # 硬限制
        - labelSelector:
            matchExpressions:      # 匹配podenv的值在["target"]中的標簽
            - key: podenv
              operator: In
              values: ["target"]
          topologyKey: kubernetes.io/hostname  # 如果找不到，調度到目標pod同一個節點上

# 創建并查看pod
[root@master ~]# kubectl create -f pod-podantiaffinity-required.yaml 
pod/pod-podantiaffinity-required created
[root@master ~]# kubectl get pod -n dev -o wide  
NAME                           READY   STATUS    RESTARTS   AGE   IP               NODE        NOMINATED NODE   READINESS GATES
pod-podaffinity-required       1/1     Running   0          10m   10.244.36.95     k8s-node1   <none>           <none>
pod-podaffinity-target         1/1     Running   0          28m   10.244.36.94     k8s-node1   <none>           <none>
pod-podantiaffinity-required   1/1     Running   0          43s   10.244.169.165   k8s-node2   <none>           <none>

3、污點調度--站在Node的角度

3.1 污點（Taints）

前面的調度方式都是站在pod的角度上，通過在Pod上添加屬性，來確定Pod是否需要調度到指定的Node上，其實我們也可以站在Node的角度上面，通過在Node上添加污點屬性，來決定是否允許Pod調度過來。

Node被設置上污點之后就和Pod之間存在了一種相斥的關系，進而拒絕Pod調度進來，設置可以將已經調度進來的Pod驅逐出去。

污點的格式為：key=value:effect，key和value是污點的標簽，effect描述污點的作用，支持如下的三個選項：

PreferNoScheduler：Kubernetes盡量避免把Pod調度到具有該污點的Node上，除非沒有其他節點可調度
NoScheduler：Kubernetes將不會把Pod調度到具有該污點的Node上，但不影響當前node上已經存在的pod
NoExecute：Kubernetes將不會把Pod調度到具有該污點的Node上，同時也會講Node上已存在的pod驅離

# 設置污點
kubectl taint nodes k8s-node1 key=value:effect

# 去除污點
kubectl taint nodes k8s-node1 key:effect-

# 去除所有污點
kubectl taint nodes k8s-node1 key-

接下來，演示一下污點的效果：

1、準備節點node1（暫時停止node2節點）
2、為node1設置一個污點：tag=qty:PreferNoSchedule;然后創建pod1（可以）
3、修改為node1節點設置一個污點：tag=qty:NoSchedule;然后創建pod2（pod1正常 pod2失?。?/li>
4、修改為node1節點設置一個污點：tag=qty:noExecute;創建pod3，全失敗

[root@master ~]# kubectl get node
NAME        STATUS     ROLES                  AGE   VERSION
k8s-node1   Ready      <none>                 13d   v1.23.5
k8s-node2   NotReady   <none>                 13d   v1.23.5
master      Ready      control-plane,master   13d   v1.23.5
# 為node1設置污點
[root@master ~]# kubectl taint nodes k8s-node1 tag=qty:PreferNoSchedule
node/k8s-node1 tainted
# 創建pod1
[root@master ~]# kubectl run taint1 --image=naginx:1.17.1 -n dev
pod/taint1 created
[root@master ~]# kubectl get pod -n dev
NAME                           READY   STATUS        RESTARTS   AGE
taint1                         1/1     Running       0          53s
# 為node1設置污點，改為NoScheduler
[root@master ~]# kubectl taint nodes k8s-node1 tag:PreferNoSchedule-
node/k8s-node1 untainted
[root@master ~]# kubectl taint nodes k8s-node1 tag=qty:NoSchedule
node/k8s-node1 tainted

# 創建pod2
[root@master ~]# kubectl run taint2 --image=nginx -n dev
pod/taint2 created
[root@master ~]# kubectl get pod -n dev
NAME                           READY   STATUS        RESTARTS   AGE
taint1                         1/1     Running       0          7m14s
taint2                         0/1     Pending       0          11s

# 為node1設置污點
[root@master ~]# kubectl taint nodes k8s-node1 tag:NoSchedule-
node/k8s-node1 untainted
[root@master ~]# kubectl taint nodes k8s-node1 tag=qty:NoExecute
node/k8s-node1 tainted

# 創建pod3
[root@master ~]# kubectl run taint3 --image=nginx -n dev
pod/taint3 created
[root@master ~]# kubectl get pod -n dev
NAME                           READY   STATUS        RESTARTS   AGE
taint3                         0/1     Pending       0          4s

# 刪除所有污點
[root@master ~]# kubectl taint nodes k8s-node1 tag-
node/k8s-node1 untainted

3.2 容忍（Toleration）

污點就是拒絕，容忍就是忽略，Node通過污點拒絕pod調度上去，pod通過容忍忽略拒絕

創建pod-toleration.yaml

apiVersion: v1
kind: Pod
metadata:
  name: pod-toleration
  namespace: dev
spec:
  containers:
  - name: nginx
    image: nginx:1.17.1
  tolerations:        # 添加容忍
  - key: "tag"         # 要容忍的污點的key
    operator: "Equal"   # 操作符
    value: "qty"        # 容忍的污點的value
    effect: "NoExecute"    # 添加容忍的規則，要和污點的規則相同

#創建pod查看
[root@master ~]# kubectl create -f pod-toleration.yaml 
pod/pod-toleration created
[root@master ~]# kubectl get pod -n dev
NAME                           READY   STATUS        RESTARTS   AGE
pod-toleration                 1/1     Running       0          39s