最新国产好看的视频,伊人天堂AV在线,国产Aaaaaa视频,蜜臀视频在线观看一区,人妻av色图,密臀久久久精品影片,青青视频免费观看毛片,久草在线观看视,国产三级精品色情在线

JAVA線程池監控以及動態調整示例詳解

 更新時間:2023年09月21日 09:28:26   作者:雪飄千里  
這篇文章主要為大家介紹了JAVA線程池監控以及動態調整示例詳解,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪

1 背景

Java線程池源碼分析 里雖然介紹了線程池的核心配置(核心線程數、最大線程數和隊列大?。┰撊绾闻渲?,但是實際上業界也沒有一個統一的標準。雖然有些所謂的"公式",但是不同的業務場景復雜多變,配置原則也不盡相同。從實際經驗來看,IO密集型、CPU密集型應用在線程配置上就比較懸殊,因此沒有一個通用的適合所有場景的公式。

那么我們換一種思路,就是既然不能明確配置,那么能不能支持動態配置呢?答案是肯定的,因?yàn)榫€程池本身就支持核心線程數和最大線程數的修改,而且是實時生效的。 通常在生產環境中,我們可以實時監控線程池的運行狀態,隨時掌握應用服務的性能狀況,以便在系統資源緊張時及時告警,動態調整線程配置,必要時進行人工介入,排查問題,線上修復。

也就是說,通過實時監控,然后動態修改。

2 監控

我們知道,線程池使用不當也會使服務器資源枯竭,導致異常情況的發生,比如固定線程池的阻塞隊列任務數量過多、緩存線程池創建的線程過多導致內存溢出、系統假死等問題。因此,我們需要一種簡單的監控方案來監控線程池的使用情況,比如完成任務數量、未完成任務數量、線程大小等信息。

線程池的監控分為2種類型,一種是在執行任務前后全量統計任務排隊時間和執行時間,另外一種是通過定時任務,定時獲取活躍線程數,隊列中的任務數,核心線程數,最大線程數等數據。

2.1 MonitoredThreadPoolStatisticsExecutor全量統計

參數名稱說明
poolName線程池的名稱
timeout預設的任務超時時間閾值
taskTimeoutFlag是否記錄任務超時次數
execTimeout任務執行超時時間閾值
taskExecTimeoutFlag是否記錄任務執行超時次數
waitInQueueTimeout任務在隊列中等待的時間閾值
taskWaitInQueueTimeoutFlag是否記錄任務等待時間超時次數
queueSizeWarningPercent任務隊列使用率告警閾值
queueSizeWarningFlag是否進行隊列容量告警
queueSizeHasWarningFlag是否需要隊列容量告警(隊列是否曾經達到過預警值)
taskTotalTime任務總時長,以任務提交時間進行計時,單位 ms
taskTotalExecTime任務總執行時長,以任務開始執行進行計時,單位 ms
minTaskTime最短任務時長,以提交時間計時,單位 ms
maxTaskTime最長任務時長,以提交時間計時,單位 ms
taskTimeoutCount任務超時次數,以任務提交進行計時
taskExecTimeoutCount任務執行超時次數,以任務開始執行時間進行計時
taskWaitInQueueTimeoutCount任務等待時間超過設定的閾值的次數
minTaskExecTime最短任務時長,以執行時間計時,單位 ms
maxTaskExecTime最長任務時長,以執行時間計時,單位 ms
activeCount線程池中正在執行任務的線程數量
completedTaskCount線程池已完成的任務數量,該值小于等于taskCount
corePoolSize線程池的核心線程數量
largestPoolSize線程池曾經創建過的最大線程數量。通過這個數據可以知道線程池是否滿過,也就是達到了maximumPoolSize
maximumPoolSize線程池的最大線程數量
poolSize線程池當前的線程數量
taskCount線程池已經執行的和未執行的任務總數

為了簡化,代碼中的監控?cái)?shù)據都是通過日志打印,實際中是通過kafka收集,然后做出可視化監控。

/**
 * 自定義可監控的線程池
 */
 public class MonitoredThreadPoolStatisticsExecutor extends ThreadPoolExecutor implements DisposableBean {
 /**
 * 線程池的名稱
 */
 private String poolName;
 /**
 * 預設的任務超時時間閾值,用于統計功能。     * 以任務提交時間進行計時,單位 ms,大于0則記錄超時次數。
 */
 private long timeout = 120000l;
 /**
 * 是否記錄任務超時次數
 */
 private boolean taskTimeoutFlag = false;
 /**
 * 任務執行超時時間閾值,用于統計功能。     * 以任務開始執行進行計時,單位 ms,大于 0 則記錄任務執行超時次數。
 */
 private long execTimeout = 120000l;
 /**
 * 是否記錄任務執行超時次數
 */
 private boolean taskExecTimeoutFlag = false;
 /**
 * 任務在隊列中等待的時間閾值,用于統計功能。     * 以任務提交時間開始計時到開始執行為止,單位 ms。
 */
 private long waitInQueueTimeout = 60000l;
 /**
 * 是否記錄任務等待時間超時次數
 */
 private boolean taskWaitInQueueTimeoutFlag = false;
 /**
 * 任務隊列使用率告警閾值
 */
 private int queueSizeWarningPercent = 80;
 /**
 * 是否進行隊列容量告警
 */
 private boolean queueSizeWarningFlag = false;
 /**
 * 是否需要隊列容量告警(隊列是否曾經達到過預警值)
 */
 private AtomicBoolean queueSizeHasWarningFlag = new AtomicBoolean(false);
 /**
 * 任務總時長,用于統計功能。以任務提交時間進行計時,單位 ms
 */
 private AtomicLong taskTotalTime = new AtomicLong(0);
 /**
 * 任務總執行時長,用于統計功能。以任務開始執行進行計時,單位 ms
 */
 private AtomicLong taskTotalExecTime = new AtomicLong(0);
 /**
 * 最短任務時長,以提交時間計時,單位 ms
 */
 private long minTaskTime = Long.MAX_VALUE;
 /**
 * 最長任務時長,以提交時間計時,單位 ms
 */
 private long maxTaskTime = 0;
 /**
 * 任務超時次數,以任務提交進行計時
 */
 private AtomicLong taskTimeoutCount = new AtomicLong(0);
 /**
 * 任務執行超時次數,以任務開始執行時間進行計時
 */
 private AtomicLong taskExecTimeoutCount = new AtomicLong(0);
 /**
 * 任務等待時間超過設定的閾值的次數
 */
 private AtomicLong taskWaitInQueueTimeoutCount = new AtomicLong(0);
 /**
 * 最短任務時長,以執行時間計時,單位 ms
 */
 private long minTaskExecTime = Long.MAX_VALUE;
 /**
 * 最長任務時長,以執行時間計時,單位 ms
 */
 private long maxTaskExecTime = 0;
 /**
 * 保存任務信息
 */
 private Map<String, TaskStatistics> taskInfoMap = new ConcurrentHashMap<String, TaskStatistics>();
 public MonitoredThreadPoolStatisticsExecutor(int corePoolSize, int maximumPoolSize, long keepAliveTime, TimeUnit unit, BlockingQueue<Runnable> workQueue, RejectedExecutionHandler handler, String poolName, long timeout, long execTimeout, long waitInQueueTimeout, int queueSizeWarningPercent) {
 super(corePoolSize, maximumPoolSize, keepAliveTime, unit, workQueue, new NamedThreadFactory(poolName), handler);
 this.poolName = poolName;
 this.timeout = timeout;
 this.execTimeout = execTimeout;
 this.waitInQueueTimeout = waitInQueueTimeout;
 this.queueSizeWarningPercent = queueSizeWarningPercent;
 if (this.timeout > 0) {
 this.taskTimeoutFlag = true;
 }
 if (this.execTimeout > 0) {
 this.taskExecTimeoutFlag = true;
 }
 if (this.waitInQueueTimeout > 0) {
 this.taskWaitInQueueTimeoutFlag = true;
 }
 if (this.queueSizeWarningPercent > 0) {
 this.queueSizeWarningFlag = true;
 }
 ThreadPoolMonitor.monitor(this);
 }
 public MonitoredThreadPoolStatisticsExecutor(int corePoolSize, int maximumPoolSize, long keepAliveTime, TimeUnit unit, BlockingQueue<Runnable> workQueue, String poolName, long timeout, long execTimeout, long waitInQueueTimeout, int queueSizeWarningPercent) {
 super(corePoolSize, maximumPoolSize, keepAliveTime, unit, workQueue, new NamedThreadFactory(poolName));
 this.poolName = poolName;
 this.timeout = timeout;
 this.execTimeout = execTimeout;
 this.waitInQueueTimeout = waitInQueueTimeout;
 this.queueSizeWarningPercent = queueSizeWarningPercent;
 if (this.timeout > 0) {
 this.taskTimeoutFlag = true;
 }
 if (this.execTimeout > 0) {
 this.taskExecTimeoutFlag = true;
 }
 if (this.waitInQueueTimeout > 0) {
 this.taskWaitInQueueTimeoutFlag = true;
 }
 if (this.queueSizeWarningPercent > 0) {
 this.queueSizeWarningFlag = true;
 }
 ThreadPoolMonitor.monitor(this);
 }
 @Override
 public void execute(Runnable command) {
 this.taskInfoMap.put(String.valueOf(command.hashCode()), new TaskStatistics());
 if (this.queueSizeWarningFlag) {
 float f = (float) getQueue().size() / (getQueue().size() + getQueue().remainingCapacity());
 BigDecimal bd = new BigDecimal(f).setScale(2, BigDecimal.ROUND_HALF_UP);
 int usedPercent = bd.multiply(new BigDecimal(100)).intValue();
 if (usedPercent > this.queueSizeWarningPercent) {
 this.queueSizeHasWarningFlag.set(true);
 System.out.println("queueSize percent Warning!used:" + usedPercent + "%,qSize:" + getQueue().size() + ",remaining:" + getQueue().remainingCapacity());
 }
 }
 super.execute(command);
 }
 @Override
 protected void beforeExecute(Thread t, Runnable r) {
 TaskStatistics taskStatistics = this.taskInfoMap.get(String.valueOf(r.hashCode()));
 if (null != taskStatistics) {
 taskStatistics.setStartExecTime(System.currentTimeMillis());
 }
 super.beforeExecute(t, r);
 }
 @Override
 protected void afterExecute(Runnable r, Throwable t) {
 //重寫此方法做一些統計功能
 long endTime = System.currentTimeMillis();
 TaskStatistics taskStatistics = this.taskInfoMap.remove(String.valueOf(r.hashCode()));
 if (null != taskStatistics) {
 long taskTotalTime = endTime - taskStatistics.getCommitTime();
 long taskExecTime = endTime - taskStatistics.getStartExecTime();
 long taskWaitInQueueTime = taskStatistics.getStartExecTime() - taskStatistics.getCommitTime();
 this.taskTotalTime.addAndGet(taskTotalTime);
 this.taskTotalExecTime.addAndGet(taskExecTime);
 if (this.minTaskTime > taskTotalTime) {
 this.minTaskTime = taskTotalTime;
 }
 if (this.maxTaskTime < taskTotalTime) {
 this.maxTaskTime = taskTotalTime;
 }
 if (this.taskTimeoutFlag && taskTotalTime > this.timeout) {
 this.taskTimeoutCount.incrementAndGet();
 }
 if (this.minTaskExecTime > taskExecTime) {
 this.minTaskExecTime = taskExecTime;
 }
 if (this.maxTaskExecTime < taskExecTime) {
 this.maxTaskExecTime = taskExecTime;
 }
 if (this.taskExecTimeoutFlag && taskExecTime > this.execTimeout) {
 this.taskExecTimeoutCount.incrementAndGet();
 }
 if (this.taskWaitInQueueTimeoutFlag && taskWaitInQueueTime > this.waitInQueueTimeout) {
 this.taskWaitInQueueTimeoutCount.incrementAndGet();
 }
 System.out.println("task cost info[ taskTotalTime:" + taskTotalTime + ",taskExecTime:" + taskExecTime + ",taskWaitInQueueTime:" + taskWaitInQueueTime + " ]");
 // 初始線程數、核心線程數、正在執行的任務數量、
 // 已完成任務數量、任務總數、隊列里緩存的任務數量、池中存在的最大線程數、
 // 最大允許的線程數、線程空閑時間、線程池是否關閉、線程池是否終止
 LOGGER.info("{}-pool-monitor: " +
 " PoolSize: {}, CorePoolSize: {}, Active: {}, " +
 "Completed: {}, Task: {}, Queue: {}, LargestPoolSize: {}, " +
 "MaximumPoolSize: {},  KeepAliveTime: {}, isShutdown: {}, isTerminated: {}",
 this.poolName,
 this.getPoolSize(), this.getCorePoolSize(), this.getActiveCount(),
 this.getCompletedTaskCount(), this.getTaskCount(), this.getQueue().size(), this.getLargestPoolSize(),
 this.getMaximumPoolSize(), this.getKeepAliveTime(TimeUnit.MILLISECONDS), this.isShutdown(), this.isTerminated());
 }
 super.afterExecute(r, t);
 }
 /**
 * Spring容器管理線程池的生命周期,線程池Bean銷毀之前先關閉     * @throws Exception
 */
 @Override
 public void destroy() throws Exception {
 shutdown();
 }
 /**
 * 線程池延遲關閉時(等待線程池里的任務都執行完畢),統計線程池情況
 */
 @Override
 public void shutdown() {
 // 統計已執行任務、正在執行任務、未執行任務數量
 LOGGER.info("{} Going to shutdown. Executed tasks: {}, Running tasks: {}, Pending tasks: {}",
 this.poolName, this.getCompletedTaskCount(), this.getActiveCount(), this.getQueue().size());
 super.shutdown();
 }
 /**
 * 線程池立即關閉時,統計線程池情況
 */
 @Override
 public List<Runnable> shutdownNow() {
 // 統計已執行任務、正在執行任務、未執行任務數量
 LOGGER.info("{} Going to immediately shutdown. Executed tasks: {}, Running tasks: {}, Pending tasks: {}",
 this.poolName, this.getCompletedTaskCount(), this.getActiveCount(), this.getQueue().size());
 return super.shutdownNow();
 }
 /**
 * 任務平均時長,無已完成任務時,返回 0
 */
 public long getTaskAvgTime() {
 if (this.getCompletedTaskCount() > 0) {
 return this.getTaskTotalTime().get() / this.getCompletedTaskCount();
 }
 return 0;
 }
 /**
 * 任務平均執行時長,無已完成任務時,返回 0
 */
 public long getTaskAvgExecTime() {
 if (this.getCompletedTaskCount() > 0) {
 return this.getTaskTotalExecTime().get() / this.getCompletedTaskCount();
 }
 return 0;
 }
 //省略setter/getter方法
} 
public class TaskStatistics {
 /**
 * 任務提交時間
 */
 private long commitTime;
 /**
 * 任務開始執行時間
 */
 private long startExecTime;
 public TaskStatistics() {
 this.commitTime = System.currentTimeMillis();
 }
}
方法含義
shutdown()線程池延遲關閉時(等待線程池里的任務都執行完畢),統計已執行任務、正在執行任務、未執行任務數量
shutdownNow()線程池立即關閉時,統計已執行任務、正在執行任務、未執行任務數量
beforeExecute(Thread t, Runnable r)任務執行之前,記錄任務開始時間,startTimes這個HashMap以任務的hashCode為key,開始時間為值
afterExecute(Runnable r, Throwable t)任務執行之后,計算任務結束時間。統計任務耗時、初始線程數、核心線程數、正在執行的任務數量、已完成任務數量、任務總數、隊列里緩存的任務數量、池中存在的最大線程數、最大允許的線程數、線程空閑時間、線程池是否關閉、線程池是否終止信息

注意事項:

  • 在 afterExecute 方法中需要注意,需要調用 ConcurrentHashMap 的 remove 方法移除并返回任務的開始時間信息,而不是調用 get 方法,因?yàn)樵诟卟l(fā)情況下,線程池里要執行的任務很多,如果只獲取值不移除的話,會使 ConcurrentHashMap 越來越大,引發內存泄漏或溢出問題。

2.2 定時采集

public class ThreadPoolMonitor {
 private static final Map<String, FutureWrapper> POOL_TASK_FUTURE_MAP = new ConcurrentHashMap<>();
 private static final ScheduledThreadPoolExecutor SCHEDULE_THREAD_POOL = new ScheduledThreadPoolExecutor(8, new NamedThreadFactory("ThreadPoolMonitor"));
 private static final Long DEFAULT_MONITOR_PERIOD_TIME_MILLS = 1000L;
 public ThreadPoolMonitor() {
 }
 public static void monitor(String name, ThreadPoolExecutor threadPoolExecutor) {
 if (threadPoolExecutor instanceof MonitoredThreadPoolStatisticsExecutor) {
 throw new IllegalArgumentException("MonitoredThreadPoolStatisticsExecutor is already monitored.");
 } else {
 monitor0(name, threadPoolExecutor, DEFAULT_MONITOR_PERIOD_TIME_MILLS);
 }
 }
 public static void remove(String name) {
 ThreadPoolMonitor.FutureWrapper futureWrapper = POOL_TASK_FUTURE_MAP.remove(name);
 if (futureWrapper != null) {
 futureWrapper.future.cancel(false);
 }
 }
 public static void remove(String name, ThreadPoolExecutor threadPoolExecutor) {
 ThreadPoolMonitor.FutureWrapper futureWrapper = POOL_TASK_FUTURE_MAP.get(name);
 if (futureWrapper != null && futureWrapper.threadPoolExecutor == threadPoolExecutor) {
 POOL_TASK_FUTURE_MAP.remove(name, futureWrapper);
 futureWrapper.future.cancel(false);
 }
 }
 static void monitor(MonitoredThreadPoolStatisticsExecutor threadPoolExecutor) {
 monitor0(threadPoolExecutor.poolName(), threadPoolExecutor, DEFAULT_MONITOR_PERIOD_TIME_MILLS);
 }
 private static void monitor0(String name, ThreadPoolExecutor threadPoolExecutor, long monitorPeriodTimeMills) {
 PoolMonitorTask poolMonitorTask = new PoolMonitorTask(threadPoolExecutor, name);
 POOL_TASK_FUTURE_MAP.compute(name, (k, v) -> {
 if (v == null) {
 return new ThreadPoolMonitor.FutureWrapper(SCHEDULE_THREAD_POOL.scheduleWithFixedDelay(poolMonitorTask, 0L, monitorPeriodTimeMills, TimeUnit.MILLISECONDS), threadPoolExecutor);
 } else {
 throw new IllegalStateException("duplicate pool name: " + name);
 }
 });
 }
 static {
 Runtime.getRuntime().addShutdownHook(new Thread(ThreadPoolMonitor.SCHEDULE_THREAD_POOL::shutdown));
 }
 static class FutureWrapper {
 private final Future<?> future;
 private final ThreadPoolExecutor threadPoolExecutor;
 public FutureWrapper(Future<?> future, ThreadPoolExecutor threadPoolExecutor) {
 this.future = future;
 this.threadPoolExecutor = threadPoolExecutor;
 }
 }
}
public class PoolMonitorTask implements Runnable {
 private final ThreadPoolExecutor monitoredThreadPool;
 private final String poolName;
 private volatile long lastTaskCount = 0L;
 public PoolMonitorTask(ThreadPoolExecutor monitoredThreadPool, String poolName) {
 this.monitoredThreadPool = monitoredThreadPool;
 this.poolName = poolName;
 }
 @Override
 public void run() {
 int activeCount = this.monitoredThreadPool.getActiveCount();
 int corePoolSize = this.monitoredThreadPool.getCorePoolSize();
 int maximumPoolSize = this.monitoredThreadPool.getMaximumPoolSize();
 int queueTaskSize = this.monitoredThreadPool.getQueue().size();
 long taskCount = this.monitoredThreadPool.getTaskCount();
 int executedTask = (int) (taskCount - this.lastTaskCount);
 log.info("線程池名稱 = {}, 活躍線程數峰值 = {}, 隊列任務數峰值 = {}, 核心線程數 = {}, 最大線程數 = {}, 執行的任務總數 = {}",
 this.poolName, activeCount, queueTaskSize, corePoolSize, maximumPoolSize, executedTask);
 this.lastTaskCount = taskCount;
 if (this.monitoredThreadPool.isTerminated()) {
 ThreadPoolMonitor.remove(this.poolName, this.monitoredThreadPool);
 }
 }
}

2.3 可視化

通過Kafka獲取到監控?cái)?shù)據后,可以做一個可視化頁面,比如可以展示下面這這些數據

  • active/coreSize :活動線程數和核心線程數的比值, 其中active = executor.getActiveCount(),表示所有運行中的工作線程的數量,這個比值反應線程池的線程活躍狀態,如果一直維持在一個很低的水平,則說明線程池需要進行縮容;如果長時間維持一個很大的數值,說明活躍度好,線程池利用率高。

  • active/maxSize :活動線程數和最大線程數的比值,這個值可以配合上面的 active/coreSize 來看,當active/coreSize大于100%的時候,如果active/maxSize維持在一個較低的值,則說明當前線程池的負載偏低,如果大于60%或者更高,則說明線程池過載,需要及時調整線程池容量配置。

  • completedTaskCount:執行完畢的工作線程的總數,包含歷史所有。

  • largestPoolSize:歷史上線程池容量觸達過的最大值

  • rejectCount:被拒絕的線程的數量,如果大量線程被拒絕,則說明當前線程池已經溢出了,需要及時調整線程池配置

  • queueSize:隊列中工作線程的數量,如果大量的線程池在排隊,說明coreSize已經不夠用了,可以根據實際情況來調整,對于執行時間要求很嚴格的業務場景,可能需要通過提升coreSize來減少排隊情況。

3 動態調整線程池

配置線程池的大小可根據以下幾個維度進行分析來配置合理的線程數:

任務性質可分為:CPU密集型任務,IO密集型任務,混合型任務,任務的執行時長,任務是否有依賴——依賴其他系統資源,如數據庫連接等。

1、CPU密集型任務 盡量使用較小的線程池,一般為CPU核數+1。 因?yàn)镃PU密集型任務使得CPU使用率很高,若開過多的線程數,只能增加上下文切換的次數,因此會帶來額外的開銷。

2、IO密集型任務 可以使用稍大的線程池,一般為2*CPU核數+1。 因?yàn)镮O操作不占用CPU,不要讓CPU閑下來,應加大線程數量,因此可以讓CPU在等待IO的時候去處理別的任務,充分利用CPU時間。

3、混合型任務 可以將任務分成IO密集型和CPU密集型任務,然后分別用不同的線程池去處理。 只要分完之后兩個任務的執行時間相差不大,那么就會比串行執行來的高效。 因?yàn)槿绻麆澐种髢蓚€(gè)任務執行時間相差甚遠,那么先執行完的任務就要等后執行完的任務,最終的時間仍然取決于后執行完的任務,而且還要加上任務拆分與合并的開銷,得不償失

4、依賴其他資源 如某個任務依賴數據庫的連接返回的結果,這時候等待的時間越長,則CPU空閑的時間越長,那么線程數量應設置得越大,才能更好的利用CPU。

小結:線程等待時間所占比例越高,需要越多線程。線程CPU時間所占比例越高,需要越少線程。

但是實踐發現,盡管我們經過謹慎的評估,仍然不能夠保證一次計算出來合適的參數,那么我們是否可以將修改線程池參數的成本降下來,這樣至少可以發生故障的時候可以快速調整從而縮短故障恢復的時間呢? 基于這個思考,我們是否可以將線程池的參數從代碼中遷移到分布式配置中心上,實現線程池參數可動態配置和即時生效,線程池參數動態化前后的參數修改流程對比如下:

3.1 修改參數

實際應用中主要有下列參數可以支持動態修改。

線程池參數說明
corePoolSize核心線程數
maximumPoolSize最大線程數
queueCapacity等待隊列大小
timeout任務超時時間告警閾值
execTimeout任務執行超時時間告警閾值
queuedTaskWarningSize等待隊列排隊數量告警閾值
checkInterval線程池定時監控時間間隔
autoExtend是否自動擴容

其中的corePoolSize、maximumPoolSize都可以使用ThreadPoolExecutor提供的api實現: public void setCorePoolSize(int corePoolSize) public void setMaximumPoolSize(int maximumPoolSize)

從ThreadPoolExecutor源碼中可知,

設置新的核心線程數時, 如果設置的新值小于當前值,多余的現有線程將在下一次空閑時終止,如果新設置的corePoolSize值更大,將在需要時啟動新線程來執行任何排隊的任務;

設置新的最大線程數時,如果新值小于當前值,多余的現有線程將在下一次空閑時終止。

ThreadPoolExecutor沒有提供直接修改等待隊列大小的api。這就需要我們自定義一個可以修改容量的隊列。其實很簡單,只要把jdk原生的隊列中的容量設置為可以修改,并提供修改方法即可。 比如把jdk中的LinkedBlockingQueue拷貝一份,命名為CapacityResizableLinkedBlockingQueue。 將其capacity的屬性變?yōu)榭勺兊?,并提供set方法:

/** The capacity bound, or Integer.MAX_VALUE if none */
private final int capacity;
//將上述原生代碼改為:
private volatile int capacity;
public void setCapacity(int capacity) { 
 this.capacity = capacity;
}

3.2 配置監聽

可以通過配置中心的動態加載來處理,以Apollo為例,我們可以利用Apollo的ChangeListener來實現對配置變更的監聽,(如果是MySQL,可以修改完配置后直接同過HTTP接口通知客戶端進行配置刷新),代碼片段如下:

public class ThreadPoolConfigUpdateListener {
 @Value("${apollo.bootstrap.namespaces:application}")
 private String namespace;
 @Autowired
 private DynamicThreadPoolFacade dynamicThreadPoolManager;
 @Autowired
 private DynamicThreadPoolProperties poolProperties;
 @PostConstruct
 public void init() {
 initConfigUpdateListener();
 }
 public void initConfigUpdateListener() {
 String apolloNamespace = namespace;
 if (StringUtils.hasText(poolProperties.getApolloNamespace())) {
 apolloNamespace = poolProperties.getApolloNamespace();
 }
 String finalApolloNamespace = apolloNamespace;
 Config config = ConfigService.getConfig(finalApolloNamespace);
 config.addChangeListener(changeEvent -> {
 try {
 Thread.sleep(poolProperties.getWaitRefreshConfigSeconds() * 1000);
 } catch (InterruptedException e) {
 log.error("配置刷新異常",e);
 }
 dynamicThreadPoolManager.refreshThreadPoolExecutor();
 log.info("線程池配置有變化,刷新完成");
 });
 }
}

線程池配置的刷新的邏輯如下:

public void refreshThreadPoolExecutor(DynamicThreadPoolProperties dynamicThreadPoolProperties) {
 try {
 dynamicThreadPoolProperties.getExecutors().forEach(poolProperties -> {
 ThreadPoolMonitor threadPoolExecutor =ThreadPoolMonitor.POOL_TASK_FUTURE_MAP.get(poolProperties.getThreadPoolName()).getThreadPoolExecutor();
 executor.setCorePoolSize(poolProperties.getCorePoolSize());
 executor.setMaxPoolSize(poolProperties.getMaximumPoolSize());
 executor.setKeepAliveSeconds((int) poolProperties.getKeepAliveTime());
 });
 }catch(Exception e){
 log.error("Executor 參數設置異常",e);
 }
 }

3.4 后臺管理

當然可以通過管理后臺來動態修改,如下圖,參數可保存在mysql

最后,一個簡單的線程池監控以及動態修改架構如下圖:

4 線程池如何保持有序/串行

線程池當然是無序的,但是如果我們需要像kafka那樣分區有序怎么辦呢?

思路:建立多個只有一個線程的線程池,然后按照不同key 在 不同線程池上執行,這樣key就相當于kafka的分區,只要key相同,那么提交的任務就會有序執行。

demo如下

類似的功能在git有大神開源了,可以去參考一下 https://github.com/PhantomThief/more-lambdas-java

以上就是JAVA線程池監控以及動態調整示例詳解的詳細內容,更多關于JAVA線程池監控動態調整的資料請關注腳本之家其它相關文章!

相關文章

  • SpringBoot中實現多線程六種方式大全

    SpringBoot中實現多線程六種方式大全

    Spring Boot 提供了非常豐富的多線程支持手段,從最簡單的注解到虛擬線程,可以滿足從簡單異步任務到高并發 IO/CPU 密集型場景的各種需求,下面列出目前(2026 年視角)最常用、最推薦的 6 種方式,需要的朋友可以參考下
    2026-02-02
  • java清除u盤內存卡里的垃圾文件示例

    java清除u盤內存卡里的垃圾文件示例

    手機內存卡空間被用光了,但又不知道哪個文件占用了太大,一個個文件夾去找又太麻煩,開發了個小程序把手機所有文件(包括路徑下所有層次子文件夾下的文件)進行一個排序,這樣你就可以找出哪個文件占用了內存太大了
    2014-02-02
  • SpringBoot使用spring.factories加載默認配置的實現代碼

    SpringBoot使用spring.factories加載默認配置的實現代碼

    在日常開發過程中,發布一些產品或者框架時,會遇到某些功能需要一些配置才能正常運行,這時我們需要的提供默認配置項,同時用戶也能覆蓋進行個性化
    2024-06-06
  • java判斷字符串包含某個字符的實例方法

    java判斷字符串包含某個字符的實例方法

    在本篇文章里小編給大家整理的是一篇關于java判斷字符串包含某個字符的實例方法,有需要的朋友們學習下。
    2019-12-12
  • SpringBoot配置MyBatis-Plus實現增刪查改

    SpringBoot配置MyBatis-Plus實現增刪查改

    本文主要介紹了SpringBoot配置MyBatis-Plus實現增刪查改,文中通過示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下
    2021-08-08
  • 使用Feign擴展包實現微服務間文件上傳

    使用Feign擴展包實現微服務間文件上傳

    這篇文章主要為大家詳細介紹了使用Feign擴展包實現微服務間文件上傳,具有一定的參考價值,感興趣的小伙伴們可以參考一下
    2019-04-04
  • SpringCloud無法獲取Nacos中的配置文件信息解決方案

    SpringCloud無法獲取Nacos中的配置文件信息解決方案

    文章介紹了在項目啟動時解決@Value占位符值找不到問題的步驟,包括檢查版本號、添加依賴、檢查配置文件優先級以及正確配置dataID
    2025-12-12
  • Java Stream API中實現數據的并行處理指南

    Java Stream API中實現數據的并行處理指南

    在 Java Stream API 中,實現數據的并行處理非常簡單,核心是通過 ??parallelStream() ??? 方法獲取并行流,而非默認的串行流(??stream()??),本文給大家介紹了Java Stream API中實現數據的并行處理的操作方法,需要的朋友可以參考下
    2025-10-10
  • SpringBoot3安全管理操作方法

    SpringBoot3安全管理操作方法

    這篇文章主要介紹了SpringBoot3安全管理,在實際開發中,最常用的是登錄驗證和權限體系兩大功能,在登錄時完成身份的驗證,加載相關信息和角色權限,在訪問其他系統資源時,進行權限的驗證,保護系統的安全,文中有詳細的操作步驟,需要的朋友可以參考下
    2023-08-08
  • Java設計模式之訪問者模式使用場景及代碼示例

    Java設計模式之訪問者模式使用場景及代碼示例

    這篇文章主要介紹了Java設計模式之訪問者模式使用場景及代碼示例,小編覺得還是挺不錯的,這里分享給大家,供需要的朋友參考。
    2017-11-11

最新評論

高安市| 武山县| 绥宁县| 清涧县| 萨嘎县| 昌黎县| 横山县| 邵阳县| 扎赉特旗| 琼结县| 丹巴县| 福安市| 阿拉善左旗| 尤溪县| 绥化市| 闵行区| 五华县| 三穗县| 呼图壁县| 温泉县| 盘锦市| 安溪县| 竹溪县| 湘乡市| 鸡泽县| 沙湾县| 普洱| 天镇县| 鄂托克旗| 新泰市| 肥西县| 铜山县| 临猗县| 长春市| 吉林省| 鄂托克旗| 六安市| 龙游县| 桦南县| 裕民县| 三亚市|